PRODUCT CATALOG 2012 - Straumann
PRODUCT CATALOG 2012 - Straumann
PRODUCT CATALOG 2012 - Straumann
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Crowns and Bridges, synOcta ® Prosthetic System<br />
(Regular Neck Ø 4.8 mm)<br />
RN synOcta 15° and 20° angled abutments for screw- and cement-retained crowns and bridges<br />
Type A = Angle to the edge<br />
Important<br />
Due to their design, short angled abutments must not be trimmed or<br />
individually modified; however, long angled abutments can be modified<br />
occlusally<br />
Abutments must not be cemented into the implant.<br />
In the case of the angled abutments, 2 types are available for each angle.<br />
This enables the axis to be corrected in 16 different alignments.<br />
The RN synOcta ®<br />
angled abutments are torqued into the implant at 35 Ncm.<br />
Angled abutments must not be used with 15° angled hollow cylinder<br />
<strong>Straumann</strong> implants.<br />
Angled abutments cannot be tightened/loosened with the extra short<br />
SCS Screwdriver.<br />
Important<br />
RN components can only be used with <strong>Straumann</strong> ®<br />
Standard, Standard Plus<br />
and Tapered Effect implants with a Ø 4.8 mm Regular Neck.<br />
Type B = Angle to the surface<br />
PROSTHETICS<br />
Caution<br />
Angled abutments are not recommended for use in the molar region.<br />
97
Change language