PRODUCT CATALOG 2012 - Straumann
PRODUCT CATALOG 2012 - Straumann
PRODUCT CATALOG 2012 - Straumann
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Crowns and Bridges, synOcta ® Prosthetic System<br />
(Wide Neck Ø 6.5 mm)<br />
15° Angled Abutment for Cement-retained Crowns and Bridges<br />
Art. No. Article Dimensions Material Price $<br />
048.608 WN synOcta 15° angled<br />
abutment, type A<br />
048.609 WN synOcta 15° angled<br />
abutment, type B<br />
height 5.5 mm A titanium 195.00<br />
height 5.5 mm B titanium 195.00<br />
Cement-retained restorations<br />
048.678 Plastic shoulder for<br />
WN synOcta ® 15°<br />
angled abutments<br />
height 4.0 mm<br />
burn-out<br />
plastic<br />
34.00<br />
Auxiliary part<br />
048.032 Transfer aid for WN synOcta<br />
15° angled abutments<br />
height 5.0 mm plastic 8.00<br />
PROSTHETICS<br />
Type A = Angle to the edge<br />
Important<br />
Abutments must not be cemented into the implant.<br />
Two types of angled WN abutments are available. This allows correction<br />
of the axis in 16 different directions.<br />
Angled abutments cannot be tightened/loosened with the extra short<br />
SCS Screwdriver.<br />
The WN synOcta angled abutments are torqued into the implant at 35 Ncm.<br />
Important<br />
WN components can only be used with <strong>Straumann</strong> ® Standard, Standard<br />
Plus and Tapered Effect implants with a Ø 6.5 mm Wide Neck.<br />
Caution<br />
Angled abutments are not recommended for use in the molar region.<br />
Type B = Angle to the surface<br />
102