PRODUCT CATALOG 2012 - Straumann

Crowns and Bridges, Solid Abutment Prosthetic System
(Wide Neck Ø 6.5 mm)
Art. No. Article Dimensions Material Price $
048.545 WN Solid abutment 6 °, green height 4.0 mm titanium 160.00
048.546 WN Solid abutment 6 °, brown height 5.5 mm titanium 160.00
040.745
WN Solid All-In-One set,
4.0 mm, for crown
abutment height
4.0 mm
titanium,
plastic
240.00
040.845
WN Solid All-In-One set,
4.0 mm, for bridge
abutment height
4.0 mm
titanium,
plastic
240.00
040.746
WN Solid All-In-One set,
5.5 mm, for crown
abutment height
5.5 mm
titanium,
plastic
240.00
040.846 WN Solid All-In-One set,
5.5 mm, for bridge
abutment height
5.5 mm
titanium,
plastic
240.00
Impression taking and master cast fabrication
048.013 WN Impression cap height 8.0 mm POM 10.00
048.065 Positioning cylinder for
048.545, green
height 10.0 mm POM 12.00
048.066 Positioning cylinder for
048.546, brown
height 10.0 mm POM 12.00
048.165 Analog for 048.545, green length 16.0 mm aluminum 32.00
048.166 Analog for 048.546, brown length 17.5 mm aluminum 32.00
PROSTHETICS
048.140 Shoulder analog for
WN Solid abutments
length 10.0 mm aluminum 15.00
040.380 Impression set for 4.0 mm,
WN Solid abutment, green
plastic/anodized
aluminum
55.00
040.384 Impression set for 5.5 mm,
WN Solid abutment, brown
Temporary restoration
plastic/anodized
aluminum
55.00
048.657 WN Temporary coping for
WN Solid abutments, crown
048.656 WN Temporary coping for
WN Solid abutments, bridge
048.051 WN Protective cap for
WN Solid abutment, green
048.052 WN Protective cap for
WN Solid abutment, brown
height 7.3 mm PMMA 28.00
height 7.3 mm PMMA 28.00
height 6.0 mm PEEK 11.0 0
height 7.5 mm PEEK 11.0 0
The WN Solid abutments are screwed into the implant with an SCS Screwdriver (see page 83) and torqued to 35 Ncm
prior to impression taking. They must not be removed from the implant after the impression has been taken.
Important
WN components can only be used with Straumann ®
Standard, Standard Plus and Tapered Effect implants with a
Ø 6.5 mm Wide Neck.
119