Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
055B <strong>Bartran</strong> (B - ISO 100, 150, 220 & 320)<br />
D3;15= (No Responses);13= (1 Response);...<br />
Page 1 of 3<br />
_________________________________________________________________________________<br />
<strong>Bartran</strong><br />
Premium Hydraulic Oil<br />
________________________________________________________________________________<br />
Description<br />
A range of superior performance mineral oil-based The <strong>Bartran</strong> range combine high lubrication<br />
hydraulic fluids containing non zinc-based anti-wear performance with outstanding fine filterability. This<br />
additives.<br />
data sheet applies to <strong>Bartran</strong> 100 to 320<br />
________________________________________________________________________________<br />
Applications<br />
<strong>Bartran</strong> oils are formulated to provide superior The <strong>Bartran</strong> oils meet specification requirements of<br />
performance in all hydraulic systems, especially all the major manufacturers of hydraulic pumps and<br />
severely stressed hydraulic systems in which high motors, and the following<br />
levels of anti-wear performance are combined with a approvals/recommendations apply :<br />
requirement for very fine filtration.<br />
- DIN 51 524, Part 2<br />
Examples include modern electro-hydraulic control - ISO 6743/4 (NFE 48-603,NFE 60-203), Category<br />
valves incorporating 0.5 (nominal) micron filters. HM<br />
The <strong>Bartran</strong> range is fully compatible with the - Hagglund-Denison HF-0, HF-2<br />
elastomer materials commonly used for static and - Vickers industrial machinery, exceeds I-286-S<br />
dynamic seals, such as :<br />
specification (pump 35V.Q.25)<br />
. Nitryl butyl (PERBUNAN* or BUNA N*)<br />
- Rexnord-Racine vane pumps<br />
. Fluorinated (VITON*/TEFLON*)<br />
- Mannesmann Rexroth Hydromatik piston pumps<br />
. Perfluorinated (KABREZ*)<br />
- Sigma-Rexroth gear pumps<br />
. Polyurethane (ADIPRENE*)<br />
- Cincinnati Milacron - p. 68-69-70<br />
. Polyester (HYTREL*) * trade marks<br />
- US Steel 136<br />
________________________________________________________________________________<br />
Main Benefits<br />
- Highest degree of equipment protection<br />
- Superior fine filterability even in wet conditions<br />
- Extended oil life and improved tolerance of severe - Leading performance in anti-wear protection,<br />
service conditions<br />
oxidation resistance and thermal stability<br />
________________________________________________________________________________<br />
Storage<br />
All packages should be stored under cover to avoid markings. Products should not be stored above 60°<br />
the possible ingress of water and the obliteration of C.<br />
drum<br />
________________________________________________________________________________<br />
Health, Safety and Environment<br />
Health, safety and environmental information is<br />
provided for this product in the relevant Materials<br />
will not accept liability if the product is used other<br />
than in the manner or with the precautions or for the<br />
http://tds-au.bp.com/bpglis/oztds3.nsf/4aea4a2e0606ab8fca256512007da189/54c9f63a040...<br />
6/07/2006
055B <strong>Bartran</strong> (B - ISO 100, 150, 220 & 320)<br />
D3;15= (No Responses);13= (1 Response);...<br />
Page 2 of 3<br />
Safety Data Sheet, which can be obtained by<br />
contacting the BP Lubricants and Fuels Technical<br />
Helpline on 1300 139 700. BP Australia, or its<br />
subsidiaries<br />
purpose/s specified. Before the product is used<br />
other than as directed, advice should be obtained<br />
from the local BP office or Lubricants and Fuels<br />
Technical Helpline.<br />
________________________________________________________________________________<br />
<strong>Bartran</strong><br />
Premium Hydraulic Oil<br />
________________________________________________________________________________<br />
Typical Characteristics<br />
Grade:<br />
<strong>Bartran</strong> 100 150 220 320<br />
Mnemonic: BA100 BA150 BA220 BA320<br />
Product Code: 217566 217578 217591 217608<br />
Test<br />
Method<br />
Units<br />
Density @ 15 °C ASTM D1298 kg/L 0.891 0.897 0.901 0.903<br />
Flash Point (PMC) ASTM D93 °C 236 241 250 261<br />
Pour Point ASTM D97 °C -18 -18 -18 -15<br />
Kinematic Viscosity<br />
40 °C ASTM D445 cSt 100 150 220 320<br />
100 °C ASTM D445 cSt 11.15 14.6 18.8 25.0<br />
Viscosity Index ASTM D2270 96 95 95 95<br />
Foam Tendency/Stability ASTM D892<br />
Sequence I ml/ml 5/0 5/0 5/0 5/0<br />
Sequence II ml/ml 5/0 5/0 5/0 5/0<br />
Sequence III ml/ml 5/0 5/0 5/0 5/0<br />
<br />
Demulsification ASTM D1401 min<br />
Rusting Test (Salt Water) ASTM D665B rating no rust no rust no rust no rust<br />
http://tds-au.bp.com/bpglis/oztds3.nsf/4aea4a2e0606ab8fca256512007da189/54c9f63a040...<br />
6/07/2006
055B <strong>Bartran</strong> (B - ISO 100, 150, 220 & 320)<br />
D3;15= (No Responses);13= (1 Response);...<br />
Page 3 of 3<br />
Copper Corrosion (3h/100°C) ASTM D130 rating 1b 1b 1b 1b<br />
Air Release<br />
(Time to 0.2% @50°C)<br />
ASTM D3427 min