Hypogear 90 - Castrol TDS
Hypogear 90 - Castrol TDS
Hypogear 90 - Castrol TDS
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
145 <strong>Hypogear</strong> <strong>90</strong> D3;15= (No Responses);13= (1 Response);14= (% Responses)<br />
http://tds-au.bp.com/bpglis/oztds3.nsf/4aea4a2e0606ab8fca256512007da189/c6d0525b739...<br />
Page 1 of 3<br />
7/07/2006<br />
_________________________________________________________________________________<br />
<strong>Hypogear</strong> <strong>90</strong><br />
Extreme Pressure Automotive Gear Oil<br />
________________________________________________________________________________<br />
Applications<br />
<strong>Hypogear</strong> <strong>90</strong> has been designed for use in hypoid, As well as Mercedes Benz transfer cases and<br />
bevel and spiral gear units, axles and final drives, mechanical steering. It is the only BP grade that<br />
operating under severe conditions of high-speed/lowtorque<br />
should be used in these applications.<br />
and low-speed/high-torque.<br />
For synchronised manual gearboxes it should be<br />
It is approved by Mercedes Benz (Sheet 235.0) for used only if lubricants of API GL5 performance level<br />
use in passenger and commercial hypoid, planetary has been explicitly recommended.<br />
and hub-drive axles.<br />
________________________________________________________________________________<br />
Main Benefits<br />
- Effective wear protection, even under severe load - Good viscosity/temperature and cold flow<br />
- Formulated with high quality mineral base oils properties;<br />
- Incorporates sulphur-phosphorus extreme pressure - Compatible with conventional seal materials used<br />
[EP] additive technology<br />
with mineral oils<br />
- Excellent resistance to foaming and corrosion<br />
________________________________________________________________________________<br />
Specifications<br />
<strong>Hypogear</strong> <strong>90</strong> meets or exceeds the requirements of:- -ZF TE-ML 01 (constant mesh gearboxes, nonsynchromesh)<br />
- API Service Classification GL-5<br />
-ZF TE-ML 05 (axles and centre reduction gear,<br />
- US Military MIL-L-PRF-2105E performance (Note: wheel hubs, half shaft and differentials)<br />
may not meet viscosity requirements)<br />
-ZF TE-ML 07 (reduction gears)<br />
- Mercedes Benz Sheet 235.0<br />
-ZF TE-ML 08 (worm and roller, worm and stud, and<br />
intermediate steering gear)<br />
________________________________________________________________________________<br />
Storage<br />
All packages should be stored under cover to avoid markings. Products should not be stored above 60°<br />
the possible ingress of water and the obliteration of C.<br />
drum<br />
________________________________________________________________________________<br />
Health, Safety and Environment<br />
Health, safety and environmental information is<br />
provided for this product in the relevant Materials<br />
Safety Data Sheet, which can be obtained by<br />
contacting the BP Lubricants and Fuels Technical<br />
will not accept liability if the product is used other<br />
than in the manner or with the precautions or for the<br />
purpose/s specified. Before the product is used<br />
other than as directed, advice should be obtained
145 <strong>Hypogear</strong> <strong>90</strong> D3;15= (No Responses);13= (1 Response);14= (% Responses)<br />
http://tds-au.bp.com/bpglis/oztds3.nsf/4aea4a2e0606ab8fca256512007da189/c6d0525b739...<br />
Page 2 of 3<br />
7/07/2006<br />
Helpline on 1300 139 700 , BP Australia, or its<br />
subsidiaries<br />
from the local BP office or Lubricants and Fuels<br />
Technical Helpline.<br />
________________________________________________________________________________<br />
<strong>Hypogear</strong> <strong>90</strong><br />
Extreme Pressure Automotive Gear Oil<br />
________________________________________________________________________________<br />
Typical Characteristics<br />
Grade:<br />
Mnemonic:<br />
<strong>Hypogear</strong> <strong>90</strong><br />
HG<strong>90</strong><br />
Product Code: 162103<br />
Test Method<br />
Units<br />
Appearance Visual undyed oily liquid<br />
Density @ 15 °C ASTM D1298 kg/L 0.912<br />
Kinematic Viscosity<br />
@ 40 °C ASTM D445 cSt 183<br />
@ 100°C ASTM D445 cSt 16.8<br />
Viscosity Index ASTM D2270 - 97<br />
Brookfield Viscosity @ -12°C ASTM D 2983 mPa.s
145 <strong>Hypogear</strong> <strong>90</strong> D3;15= (No Responses);13= (1 Response);14= (% Responses)<br />
http://tds-au.bp.com/bpglis/oztds3.nsf/4aea4a2e0606ab8fca256512007da189/c6d0525b739...<br />
Page 3 of 3<br />
7/07/2006<br />
AUS9502<br />
© BP Oil International Ltd.<br />
________________________________________________________________________________<br />
_________________________________________________________________________________<br />
Last Modified: 04/09/2003 06:28:30<br />
_________________________________________________________________________________
Change language