Cane Harvester Hydraulic Oil, BP - Castrol TDS

055B Cane Harvester Hydraulic Oil, BP
D3;15= (No Responses);13= (1 Response);14= ...
http://tds-au.bp.com/bpglis/oztds3.nsf/4aea4a2e0606ab8fca256512007da189/d5f458c80d6...
Page 1 of 3
6/07/2006
_________________________________________________________________________________
Cane Harvester Hydraulic Oil, BP
Premium Hydraulic Oil
________________________________________________________________________________
Description
A high performance, shear-stable, mineral oil-based
hydraulic fluid possessing a high viscosity index
(>150) for minimal viscosity change with temperature
and containing zinc-based anti-wear additives
specifically designed for use in the hydraulic systems harvesters.
of cane harvesters.
BP Cane Harvester Hydraulic Oil has demonstrated
The selection of a shear stable viscosity index excellent performance in field trials over two
improver ensures that viscosity is maintained at seasons in Austoft 7000 series harvester.
design levels in service.
________________________________________________________________________________
Applications
Main Benefits
Storage
This high performance product also has been
formulated to ensure low foaming and air
entrainment tendencies, essential to effective
equipment performance in hard working cane
BP Cane Harvester Hydraulic Oil is intended for the This product is fully compatible with the elastomer
severely stressed hydraulic systems of cane materials commonly used in cane harvesters and
harvesters, in which a fluid that combines a high other hydraulic equipment for static and dynamic
level of anti-wear performance with superior fluid seals, such as, Nitryl Butyl (PERBUNAN* or BUNA
viscosity stability is required.
N*), Fluorinated (VITON*/TEFLON*), Perfluorinated
This product is also suitable for use in plant or (KABREZ*), Polyurethane (ADIPRENE*)
equipment likely to operate in wide variations of Polyester (HYTREL*) * trade marks
temperatures e.g. machinery subjected to very cold It also meets specification requirements of the major
start-up conditions and high temperature running. manufacturers of hydraulic pumps and motors.
It is also ideal as a rationalisation grade for mobile It is strongly suggested that the recommendations of
and plant equipment hydraulics, especially where equipment manufacturers regarding pre-filtering,
ambient temperatures and/or extreme duty exist. filtration and oil change intervals be observed.
________________________________________________________________________________
- Wide operating temperature range
- High tolerance of severe service conditions
- Proven in severe service trials
- Superior performance in anti-wear protection
- Excellent rationalisation grade
- Excellent anti-foam properties and low air
- Stable viscosity characteristics
entrainment tendencies
________________________________________________________________________________
All packages should be stored under cover to avoid markings. Products should not be stored above 60°
the possible ingress of water and the obliteration of C.
drum
________________________________________________________________________________

055B Cane Harvester Hydraulic Oil, BP
D3;15= (No Responses);13= (1 Response);14= ...
http://tds-au.bp.com/bpglis/oztds3.nsf/4aea4a2e0606ab8fca256512007da189/d5f458c80d6...
Page 2 of 3
6/07/2006
Health, Safety and Environment
Health, safety and environmental information is
provided for this product in the relevant Materials
Safety Data Sheet, which can be obtained by
contacting the BP Lubricants and Fuels Technical
Helpline on 1300 139 700. BP Australia, or its
subsidiaries
will not accept liability if the product is used other
than in the manner or with the precautions or for the
purpose/s specified. Before the product is used
other than as directed, advice should be obtained
from the local BP office or Lubricants and Fuels
Technical Helpline.
________________________________________________________________________________
Cane Harvester Hydraulic Oil, BP
Premium Hydraulic Oil
________________________________________________________________________________
Typical Characteristics
Grade:
Mnemonic:
Cane Harvester Hydraulic Oil
CAHAHY
Product Code: 217621
Test Method
Units
Density @ 15 °C ASTM D1298 kg/L 0.888
Flash Point (PMC) ASTM D93 °C 220
Flash Point (COC) ASTM D92 °C 240
Fire Point (COC) ASTM D92 °C 258
Pour Point ASTM D97 °C -33
Kinematic Viscosity
@ 40 °C ASTM D445 cSt 72.5
@ 100 °C ASTM D445 cSt 11.5
Viscosity Index ASTM D2270 - 152
Demulsibility ASTM D1401 mL-mL-mL(min) 40-40-0 (20)
Foam Tendency/Stability: ASTM D892 mL/mL

055B Cane Harvester Hydraulic Oil, BP
D3;15= (No Responses);13= (1 Response);14= ...
http://tds-au.bp.com/bpglis/oztds3.nsf/4aea4a2e0606ab8fca256512007da189/d5f458c80d6...
Page 3 of 3
6/07/2006
Sequence I 0/0
Sequence II 0/0
Sequence III 0/0
Rusting Test (Salt Water) ASTM D665B rating pass
________________________________________________________________________________
The above figures are typical of those obtained with normal production tolerance and do not constitute a
specification.
This Data Sheet and information it contains is considered to be
accurate at the date of printing. No warranty or representation,
expressed or implied, is made as to the accuracy or completeness of
the data and information contained in this publication.
It is the User's obligation to evaluate and use products safely and
within the scope advised in the data sheet and to comply with all
applicable laws and regulations. No statement made in this publication
shall be construed as a permission, recommendation or authorisation
given or implied to practice any patented invention without a valid
licence.
OZ9610
The Seller shall not be responsible for any loss or damage resulting
from any hazards or risks identified in the data sheet and which are
associated with petroleum products concerned (provided that this
disclaimer shall not affect any statutory rights of the Buyer of the
petroleum products concerned).
BP Australia Pty Ltd Lubes & Fuels Tech. Helpline: 1300 139 700
Melbourne Central Tower Fax (Australia): (03) 9268 4394
360 Elizabeth Street
Melbourne Victoria 3000
ABN 53004 085 616
© BP Oil International Ltd.
________________________________________________________________________________
_________________________________________________________________________________
Last Modified: 04/09/2003 03:02:58
_________________________________________________________________________________