Energrease Petrol Resistant - Castrol TDS

Energrease Petrol Resistant
D3;15= (No Responses);13= (1 Response);14= (% Respons...
http://tds-au.bp.com/bpglis/oztds3.nsf/4aea4a2e0606ab8fca256512007da189/409e0d0cbd9...
Page 1 of 3
7/07/2006
_________________________________________________________________________________
Energrease Petrol Resistant
Rubber Grease
________________________________________________________________________________
Description
Energrease Petrol Resistant is a castor oil based This grease will not degrade natural rubbers or be
silica thickened grease developed for protection and effected by the solvent action of hydrocarbons.
lubrication applications where contact with natural
rubber or hydrocarbons may occur.
It exhibits an NLGI consistency of 4.
________________________________________________________________________________
Applications
Energrease Petrol Resistant may be used in
applications where hydrocarbon products - such as
motor spirit, LPG or other hydrocarbon solvents -
come into contact with grease that is providing
general lubrication or acting as a sealant. The
solvent action of these fluids may severely affect or
wash away standard greases leaving the
components without lubrication. Energrease Petrol
Resistant is resistant to these solvents.
Energrease Petrol Resistant as a solvent resistant
grease is recommended for:
- Lubrication of glands on solvent pumps in dry
cleaning plants, paint industry, chemical industry etc.
- Petrol pump spindle glands.
- A sealant for metal connections through which
liquid or gaseous hydrocarbons pass.
Energrease Petrol Resistant is formulated for
operating temperatures between -25°C and 110 °C.
________________________________________________________________________________
Main Benefits
- Resistant to hydrocarbon solvents - Will not degrade natural rubbers
________________________________________________________________________________
Storage
Energrease Petrol Resistant is also suitable for
applications where it may come in contact with
natural rubber components. Standard greases
composed of thickeners and mineral oils will attack
natural rubbers causing swelling and degradation.
Energrease Petrol Resistant will not adversely effect
natural rubbers .
It is therefore suitable for uses such as:
- Lubrication of automotive brake components
- Operations that call for a "rubber grease"
- A corrosion preventative and lubricant to assist in
fitting and removal of tyres in agricultural, mining
and earthmoving equipment. Note: not all equipment
manufacturers support this application, enquire of
manufacturer or agent for correct tyre-fitting
procedure.
All packages should be stored under cover and use. Grease guns and grease systems should be
secure at moderate temperatures. Always reseal maintained clean and in good working order.
containers after
________________________________________________________________________________

Energrease Petrol Resistant
D3;15= (No Responses);13= (1 Response);14= (% Respons...
http://tds-au.bp.com/bpglis/oztds3.nsf/4aea4a2e0606ab8fca256512007da189/409e0d0cbd9...
Page 2 of 3
7/07/2006
Health, Safety and Environment
Health, safety and environmental information is accept liability if the product is used other than in the
provided for this product in the Materials Safety Data manner or with the precautions or for the purpose/s
Sheet. These sheets are available from the local BP specified. Before the product is used other than as
office or the BP Lubricants and Fuels Technical directed, advice should be obtained from the local
Helpline (phone 1300 139 700). BP Australia Limited BP office or the Technical Helpline.
or its subsidiaries will not
________________________________________________________________________________
Energrease Petrol Resistant
Rubber Grease
________________________________________________________________________________
Typical Characteristics
Grade:
Mnemonic:
Energrease Petrol Resistant
PETRES
Product Code: 514111
Test Method
Units
Appearance Visual Off-white
Texture
Smooth
NLGI Consistency 4
Thickener/Soap
Silica
Drop Point ASTM D2265 °C >230
Penetration @ 25°C ASTM D217 dmm 200
Worked 60 Strokes
Water Content ASTM D95 % mass 0.5
Oil Content % mass 87
Oil Type
Castor
________________________________________________________________________________
The above figures are typical of those obtained with normal production tolerance and do not constitute a

Energrease Petrol Resistant
D3;15= (No Responses);13= (1 Response);14= (% Respons...
http://tds-au.bp.com/bpglis/oztds3.nsf/4aea4a2e0606ab8fca256512007da189/409e0d0cbd9...
Page 3 of 3
7/07/2006
specification.
This Data Sheet and information it contains is considered to be
accurate at the date of printing. No warranty or representation,
expressed or implied, is made as to the accuracy or completeness of
the data and information contained in this publication.
It is the User's obligation to evaluate and use products safely and
within the scope advised in the data sheet and to comply with all
applicable laws and regulations. No statement made in this publication
shall be construed as a permission, recommendation or authorisation
given or implied to practice any patented invention without a valid
licence.
The Seller shall not be responsible for any loss or damage resulting
from any hazards or risks identified in the data sheet and which are
associated with petroleum products concerned (provided that this
disclaimer shall not affect any statutory rights of the Buyer of the
petroleum products concerned).
BP Australia Pty Ltd. Lubes & Fuels Tech. Helpline: 1300 139 700
ABN 53004 085 616 Fax (Australia): (03) 9268 4394
© BP Oil International Ltd.
________________________________________________________________________________
_________________________________________________________________________________
Last Modified: 04/09/2003 04:36:27
_________________________________________________________________________________