5' 3-POINT ROUGH CUT MOWER - Harbor Freight Tools

5. Clear area of stones and debris before
mowing.
6. Use on level lawns only. Do not use
Mower for other than intended use.
7. Do not install on a tractor over 40 HP.
Do not exceed tractor PTO of 540
RPM at the drive shaft.
8. Do not stand between the tractor
and the mower when it is running.
The P.T.O. shaft spins rapidly and
can grab loose clothing or equipment
causing serious personal injury. Do
not operate this product if the
P.T.O. shield is damaged.
9. CARBON MONOXIDE
HAZARD
Using an engine indoors
CAN KILL YOU IN
MINUTES.
Tractor exhaust contains carbon
monoxide. This is a poison you
cannot see or smell.
11. Do not operate Mower without all
guards and shields in place.
12. Maintain labels and nameplates on
the Mower. These carry important
safety information. If unreadable or
missing, contact Harbor Freight Tools
for a replacement.
13. The warnings, precautions, and instructions
discussed in this instruction
manual cannot cover all possible conditions
and situations that may occur.
It must be understood by the operator
that common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
SAVE THESE
INSTRUCTIONS.
NEVER use inside a barn or garage,
EVEN IF doors and windows are
open.
Only use OUTSIDE and far away
from windows, doors, and vents.
10. Professional applications must meet
OSHA standards.
SKU 98795 For technical questions, please call 1-800-444-3353. Page 4