5' 3-POINT ROUGH CUT MOWER - Harbor Freight Tools
5' 3-POINT ROUGH CUT MOWER - Harbor Freight Tools
5' 3-POINT ROUGH CUT MOWER - Harbor Freight Tools
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
9. This Mower is only recommended for<br />
light duty use on level lawns. Cutting<br />
speed will depend upon the height,<br />
type, and density of the grass to be<br />
cut. Tall or thick grass should be cut<br />
at low speed, while short, thin grass<br />
can be cut faster. Grass should be<br />
cut when dry; wet grass will stick to<br />
the Mower and clog it up.<br />
10. If the mower contacts a hidden obstruction,<br />
immediately stop operation.<br />
Raise the mower, turn off the tractor,<br />
and disconnect the drive shaft. Secure<br />
the mower in the upright position.<br />
Verify that the mower is not<br />
damaged before continuing.<br />
IN ORDER TO AVOID<br />
PERSONAL INJURY OR<br />
PROPERTY DAMAGE. When<br />
attempting to stop a tractor<br />
which does not have a live<br />
P.T.O, the momentum created<br />
by the blades of a mower can<br />
cause the tractor to be<br />
pushed forward. Do not<br />
operate this mower unless the<br />
tractor has a live or<br />
independent P.T.O.<br />
11. When finished, move the Mower to<br />
the intended storage area, and allow<br />
the P.T.O. to rotate to a stop before<br />
getting off the tractor.<br />
12. To prevent accidents, disconnect<br />
the mower from the tractor after use.<br />
Clean, then store the appliance indoors<br />
out of children’s reach.<br />
SKU 98795 For technical questions, please call 1-800-444-3353. Page 8
Change language