5' 3-POINT ROUGH CUT MOWER - Harbor Freight Tools
5' 3-POINT ROUGH CUT MOWER - Harbor Freight Tools
5' 3-POINT ROUGH CUT MOWER - Harbor Freight Tools
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Lift Arm Brace (24)<br />
f. the Flat Washer (3) and Lock Washer<br />
(4)<br />
11, 12, 13<br />
24<br />
31<br />
10<br />
10<br />
4.<br />
Attach both Lift Arm Braces (24) by<br />
sliding them over the two A-frame<br />
tailwheel bolts. Start the Nuts on the<br />
bolts, but do not tighten them. Allow<br />
the lift arm braces to rotate forward<br />
and rest against the Lift Arm Brace<br />
(24).<br />
6.<br />
31<br />
Pull the right side lift arm to the outside<br />
of the lift arm bracket and fasten<br />
with the Nut (13).<br />
7. Place the Sleeve (14) between the<br />
arms on the Hitch Bracket (16) and<br />
attach it to the holes at the top of the<br />
assembly with Bolt (7). Secure with<br />
Washers (3, 4) and Nut (5).<br />
8. Tighten all hardware.<br />
Attaching the Wheel.<br />
9. Raise and secure the back of the<br />
Mower.<br />
5. Insert Mounting Bolt (10) through<br />
a. the hole in the left side Lift Arm<br />
Brace,<br />
b. the lower hole in the left side lift arm,<br />
c. the Spacer (40),<br />
d. the lower holes in the right side lift<br />
arm,<br />
e. the right side lift arm brace.<br />
10. Attach the Wheel (20) to the Wheel<br />
Assembly (23) with Lock Pin (53) and<br />
Nut (57).<br />
11. Tighten all hardware.<br />
12. Lubricate according to directions in<br />
the “Maintenance and Servicing” section<br />
before first use.<br />
Add SAE 90 EP oil to the gearbox of the<br />
Mower before first use. See directions<br />
under the “Maintenance and Servicing”<br />
section for directions.<br />
SKU 98795 For technical questions, please call 1-800-444-3353. Page 6
Change language