frostskyddskabel frostsikringskabel jäätymissuojakaapeli - Biltema
frostskyddskabel frostsikringskabel jäätymissuojakaapeli - Biltema
frostskyddskabel frostsikringskabel jäätymissuojakaapeli - Biltema
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
d - dimension of heating cable is 5 x 7 mm<br />
LP<br />
- heating cable length is 2100 cm<br />
LR<br />
- pipe length is 1200 cm<br />
Heating Cable<br />
Fig. 1<br />
o<br />
INSTALLATIONSINSTRUKTIONER 45<br />
Thus, the cable has to be<br />
cable runs is about 11 cm.<br />
Art. 46-365, Art. 46-366<br />
Art. 46-367<br />
3. Se följande exempel på hur kabeln kan dras<br />
runt böjar och ventiler.<br />
OBS!<br />
• Om rören kommer upp ovan jord ska kabeln<br />
installeras ner till frostlinje.<br />
• Rören inklusive <strong>frostskyddskabel</strong>n ska<br />
isoleras med rörisolering. Thus, the cable has to be wound around the pipe so that the distance between<br />
• Anslut stickkontakten cable till ett runs jordat is about uttag 11 cm.<br />
med 230 VAC ~ 50Hz.<br />
• Kabeln ska installeras via jordfelsbrytare.<br />
Finns ingen, kan en flyttbar jordfelsbrytare<br />
användas.<br />
STAGE 2<br />
The ELEKTRA FreezeTec heating set is laid along the pipe as shown on the<br />
Drawing (Fig. 2a) or helically wound around the pipe (Fig. 2b).<br />
Method used to lay the cable (along or helically around the pipe) depends on the<br />
selected length of heating cable. Cables are attached by means of a tape.<br />
et is laid along the pipe as shown on the<br />
und the 1. Välj pipe kabellängd (Fig. 2b). och monteringsmetod enligt<br />
rekommendationstabellen.<br />
Heating Installation<br />
r helically around the pipe) depends on the<br />
cable<br />
tape<br />
Thermostat<br />
are attached Längs ledningen by means of a tape.<br />
www.elektra.eu<br />
Heating<br />
cable<br />
Installation<br />
tape<br />
300mm<br />
300mm<br />
Heating Installation<br />
cable<br />
tape<br />
Examples Thermostat of heating cable fitted along the pipe bend and on the valve.<br />
Med<br />
Fig. 2a<br />
10 – 20 lindningar per meter installation tape<br />
heating cable Fig. 2b<br />
Thermostat<br />
Examples of heating cable fitted alo<br />
installation tape<br />
heating cable<br />
The heating cable should surround<br />
the valve from both sides.<br />
www.elektra.eu<br />
300mm<br />
2. Placera den flata delen av termostaten så<br />
Fig. 2b<br />
att den känner av temperaturen där röret blir<br />
kallast. Tejpa fast kabeln med isoleringstejp.<br />
7<br />
5<br />
300 mm<br />
Pipeline<br />
Thermal<br />
Insulation<br />
Fig. 1<br />
Installation<br />
tape<br />
Heating Cable<br />
Examples of heating cable fitted on a pipe flange, suspended pipe bearers and ground suppo<br />
o<br />
45<br />
installation 4. Täck taperöret och kabeln med rörisolering som<br />
5heating är cable 10 – 20 mm tjock. Rörisolering finns att<br />
köpa på <strong>Biltema</strong>.<br />
STAGE 2<br />
The ELEKTRA FreezeTec heating set is laid along the pipe as shown on the<br />
Drawing (Fig. 2a) or helically wound around the pipe (Fig. 2b).<br />
Method used to lay the cable (along or helically around the pipe) depends on the<br />
selected length of heating cable. Cables are attached by means of a tape.<br />
NOTE: Heating cables fitted on valves, flanges or supports cannot come<br />
contact with each other. To prevent possible displacement, the c<br />
should be fitted with extra tape lengths.<br />
Heating<br />
cable<br />
Installation<br />
tape<br />
Thermostat<br />
Heating<br />
cable<br />
Installation<br />
tape<br />
STAGE 3<br />
Thermostat<br />
After the ELEKTRA FreezeTec cable is placed on the pipe, it must be<br />
with self-adhesive aluminium tape along the whole cable length.<br />
Fig. 2a<br />
300mm<br />
Fig. 2b<br />
300mm<br />
8<br />
3<br />
© 2013-01-28 <strong>Biltema</strong> Nordic Services AB
Change language