AdrenalineMoto - PU STREET 2014.pdf.pdf

www.partsnetweb.com
EXHAUST
KE-8030
KE-8032
MISC. PARTS/ACCESSORIES
KE-8055
DESCRIPTION PART # SUG. RETAIL
G-22 super baffle wrap KE-8030 $54.95
Die-cast baffle cap KE-8032 54.95
Baffle cap w/ turndown tip for all K-Series
w/ hardware KE-8055 131.95
HEAVY-DUTY
EXHAUST CLAMPS
•Extra-strong T-bolt-style clamps provide
uniform clamping force to help prevent leaks
•Made of corrosion-resistant stainless steel for
long-lasting good looks
•Sold each
DESCRIPTION PART # SUG. RETAIL
1.5” - 1.64” 1861-0870 $6.95
1.63” - 1.88” 1861-0871 6.95
1.75” - 2” 1861-0872 6.95
1.94” - 2.18” 1861-0873 6.95
SUG. RETAIL .............. $6.95
DESCRIPTION PART # SUG. RETAIL
2.13” - 2.37” 1861-0874 $6.95
2.21” - 2.56” 1861-0875 6.95
2.56” - 2.87” 1861-0876 6.95
EXHAUST
LUGGAGE
AUDIO &
VIDEO
COVERS &
SECURITY
18mm O2
SENSORS
1861-0887
•Precisionmanufactured
with
1861-0884
a ceramic body
made of stabilized
zirconium dioxide,
surface-coated
with gas-permeable
platinum electrodes
and a porous ceramic to
help prevent erosion due to
contamination and particulates
in the exhaust gases
•Slow reading oxygen sensors can cause a drop in fuel economy of
10-15%, excessive exhaust emissions and poor drivability
•Life expectancy of an average oxygen sensor in a properly tuned engine
is typically 30,000-50,000 miles
•Narrow band O 2
sensors available in 12.5”, 16.25” and 22.25” overall
lengths; has 2-wire sensor plug
•Replacement Wide Band O 2
sensor for aftermarket ignition tuners also
available; overall length is 30.25”; has 5-wire sensor plug
•All sensors meet or exceed OE specifications
•Made in the U.S.A.
DESCRIPTION PART # SUG. RETAIL
NARROW BAND (2-WIRE PLUG)
O 2 sensor w/ 12.5” L wire lead 1861-0884 $59.95
O 2 sensor w/ 16.25” L wire lead 1861-0885 59.95
O 2 sensor w/ 22.25” L wire lead 1861-0886 59.95
WIDE BAND (5-WIRE PLUG)
O 2 sensor w/ 30.25” L wire lead 1861-0887 119.95
O 2
SENSOR PORT
PLUG KIT
•Kit allows select pre-closedloop
models to run newer
style exhaust systems equipped with O 2
sensor ports
•Includes two zinc-plated plugs with
sealing washers
1861-0607
•Simply screw into nonessential sensor ports
DESCRIPTION PART # SUG. RETAIL
Sensor port plug kit, 10mm 1861-0678 $17.95
Sensor port plug kit, 12mm 1861-0607 19.95
O 2 SENSOR BUNG,
PLUG AND WASHER
TORQUE
CONES
•Generate correct levels
WELD-ON EGT BUSHING
of backpressure for
•Allows installation of exhaust gas temperature meter
•Sold each
SUG. RETAIL ............$21.95 PART # 1861-0525
•Available as a set or individually
•Weld-in O 2
sensor bung allows installation of
O 2
sensors in any exhaust system; 18mm x 1.5p
•O 2
sensor bung plug works with any O 2
sensor bung; 18mm x 1.5p
•Aluminum bung plug washer fits any 18mm O 2
sensor bung plug
DESCRIPTION PART # SUG. RETAIL
O 2 sensor bung, plug and washer set 1861-0728 $18.95
Weld-in O 2 sensor bung 1861-0523 9.95
O 2 sensor bung plug 1861-0522 8.95
Aluminum washer for O 2 sensor plug 1860-0545 2.45
increased horsepower
•Fully radiused edges for improved engine
response, especially low-end torque
•For use with stock or aftermarket exhaust systems
•Sold in pairs
•Made in the U.S.A.
1861-0728
1861-0400
DESCRIPTION PART # SUG. RETAIL
For 1 1 /2” – 1 3 /4” i.d. exhaust pipes 1861-0400 $34.95
For 1 3 /4” – 2” i.d. exhaust pipes 1861-0479 49.95
GENERAL
ACCESSORIES
WINDSHIELDS
FAIRINGS &
BODY
SEATS &
SISSY BARS
HANDLEBARS &
HAND CONTROLS
FOOTPEGS &
FOOT CONTROLS
LIGHTING
ELECTRICAL
& GAUGES
SPROCKETS
CHAINS
WHEELS &
ACCESSORIES
BRAKES
SUSPENSION
ENGINE
1812-0150
•PART #1812-0150 allows you to open up your exhaust for straightthrough
flow by simply turning a screw
•PART #1812-0194 has a Vortex design that creates unique spiraling back
pressure, altering sound and performance
•Slight power gains when used on modified motors
•Both styles sold each
•Made in the U.S.A.
SUG. RETAIL ............$52.95
DESCRIPTION PART #
For 4” dia. SuperTrapp external disc mufflers 1812-0150
Vortex style for 4” dia. SuperTrapp external disc mufflers 1812-0194
NOTE: It is recommended that new exhaust gaskets and a proper jet kit be installed when changing an exhaust system on a carbureted motorcycle. It is
recommended that new exhaust gaskets and a Power Commander be installed when changing an exhaust system on a fuel-injected motorcycle. See the
Engine section for exhaust gaskets and the Fuel Systems section for jet kits and Power Commanders.
IMPORTANT NOTE: SEE PAGE 4 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EMISSION CONTROL REGULATORY
COMPLIANCE INFORMATION.
All part numbers in BOLD MAGENTA
are new this year.
EXHAUST END CAPS
1812-0194
UNIVERSAL HEAT SHIELDS
•Sold each
•Made in the U.S.A.
SIZE PART #
1 3 /4”, 6” L 990155
2014 PARTS UNLIMITED STREET
990165
•High-quality heat shields look great and keep you cool
•Heat shields available in three sizes to fit most pipes
•Shields are triple chrome-plated and highly polished for a non-blueing
look for years to come
•Come complete with clamps for mounting
SIZE PART #
2”, 7” L 990165
SUG. RETAIL ............$19.95
SIZE PART #
2 1 /4”, 7” L 990175
FUEL/AIR
SYSTEMS
CHEMICALS
& LUBES
HARDWARE
& TOOLS
TRANSPORT &
TRAILER
MERCHANDISING
CROSS
REFERENCE
INDEX
101