AdrenalineMoto - PU STREET 2014.pdf.pdf

www.partsnetweb.com
FUEL/AIR SYSTEMS
LCD DISPLAY ACCESSORY FOR
POWER COMMANDER III USB/V
•Connects to any Power Commander USB or PCV via a “quick-disconnect” cable
•Displays all available data from the Power Commander when connected
•Store and switch between multiple maps in the on-board memory; maps can be sent
to the Power Commander “on the fly”
•Adjust maps using the controls on the display screen
•Logs data for later analysis
•Data storage for maps and logging by adding an SD Memory card; sold separately
•Can be easily removed from the bike to program with a desktop computer
•USB programmable and upgradable
•Uses an Active matrix TFT LCD 240 x 320 16-bit screen SUG. RETAIL ............................................................ $299.95
DESCRIPTION PART #
LCD display for Power Commander III USB 1020-0325 1
LCD display for Power Commander V 1020-0924
1
Not for Wide Band Power Commander.
EXHAUST
LUGGAGE
AUDIO &
VIDEO
COVERS &
SECURITY
GENERAL
ACCESSORIES
WINDSHIELDS
FAIRINGS &
BODY
SEATS &
SISSY BARS
HANDLEBARS &
HAND CONTROLS
1020‐0327
FOOTPEGS &
FOOT CONTROLS
1020‐0326
MULTI-FUNCTION HUB ACCESSORY FOR POWER COMMANDER III USB
•The Multi-Function Hub allows access to advanced expansion features of the Power Commander III USB
•Compatible with the LCD display, but the display is not required
•Four separate functions can be accessed with the Multi-Function Hub
•The Map Selection Switch ( 7 /8” bar mount) allows the rider to switch between two different maps in the Power Commander; this allows a map for
economy and a separate map for performance
•Pressure input allows the fuel to be increased along with the boost level on turbocharged installations
•Relay outputs allow up to two warning lights or relays to be triggered independently to activate items such as shift lights, nitrous systems, or air
shifter; the trigger can be by throttle percent, rpm, or both
•Comes complete with installation instructions, wiring diagrams and CD with the required software updates
NOTE: Not for Wide Band Commanders.
DESCRIPTION PART # SUG. RETAIL
Multi-Function Hub and wiring harness for Map Selection Switch only 1020-0326 $179.95
Multi-Function Hub and wiring harness for Map Selection, Gear Position, Speed Sensor, Pressure Input and two relay outputs 1020-0327 219.95
LIGHTING
ELECTRICAL
& GAUGES
SPROCKETS
CHAINS
WHEELS &
ACCESSORIES
BRAKES
SUSPENSION
ENGINE
FUEL/AIR
SYSTEMS
CHEMICALS
& LUBES
UNIVERSAL QUICK
SHIFTER IGNITION MODULE
•Allows any vehicle with 4-cylinders or less (M/C, ATV, Mini sprint, etc.) to
use Quick Shifter functionality without a Power Commander
•Control unit can toggle between “road” and “race” settings, depending
on usage
•Compatible with PCIII USB style quick shifter sensors
•Includes all necessary wires and connectors
SUG. RETAIL .........$289.95 PART # 1601-0291
IMPORTANT NOTE: SEE PAGE 1187 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EMISSION CONTROL REGULATORY
COMPLIANCE INFORMATION.
All part numbers in BOLD MAGENTA
are new this year.
2014 PARTS UNLIMITED STREET
IGNITION QUICK SHIFTER KIT
FOR KAWASAKI EX250 NINJA 08-12
•Give your EX250 Ninja quick shifter functionality without the need for a
Power Commander
•Includes Dynojet Quick Shifter (DQS) sensor, shift rod
and ignition module
•Ignition module allows you to manually adjust cylinder “kill times,” or
let the Intellishift feature stagger them automatically
•DQS sensor allows full-throttle, clutchless upshifts in racing and
performance riding
•Installs in as little as 30 minutes, with no computer required for setup
SUG. RETAIL .........$399.95 PART # 1601-0383
HARDWARE
& TOOLS
TRANSPORT &
TRAILER
MERCHANDISING
CROSS
REFERENCE
INDEX
1193