14.10.2014 Views

AdrenalineMoto - PU STREET 2014.pdf.pdf

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

LIGHTING<br />

www.partsnetweb.com<br />

EXHAUST<br />

LUGGAGE<br />

2050‐0115<br />

AUDIO &<br />

VIDEO<br />

2050‐0116<br />

COVERS &<br />

SECURITY<br />

2050‐0114<br />

GENERAL<br />

ACCESSORIES<br />

WINDSHIELDS<br />

FAIRINGS &<br />

BODY<br />

SEATS &<br />

SISSY BARS<br />

HANDLEBARS &<br />

HAND CONTROLS<br />

FOOTPEGS &<br />

FOOT CONTROLS<br />

LIGHTING<br />

ELECTRICAL<br />

& GAUGES<br />

SPROCKETS<br />

CHAINS<br />

WHEELS &<br />

ACCESSORIES<br />

BRAKES<br />

SUSPENSION<br />

ENGINE<br />

FUEL/AIR<br />

SYSTEMS<br />

CHEMICALS<br />

& LUBES<br />

HARDWARE<br />

& TOOLS<br />

TRANSPORT &<br />

TRAILER<br />

MERCHANDISING<br />

CROSS<br />

REFERENCE<br />

INDEX<br />

766<br />

PLUG-AND-PLAY DIAMOND STAR<br />

HEADLIGHT MODULATOR<br />

•Modulator pulses headlight for extra visibility during daylight hours<br />

•Pulses only during daylight hours thanks to a built-in photocell<br />

•Choice of two settings – both are DOT compliant<br />

•Uses bike’s high/low beam switch<br />

•Features Heads Up Alert; just press the horn and the headlight<br />

will pulse for three seconds<br />

•Switches from high-beam or low-beam to the other in case of<br />

bulb burnout<br />

•Measures 2 1 /4” L x 1 5 /8” W x 5 /8” H<br />

•Surge protected<br />

•Wiring harness required and available separately<br />

•Made in the U.S.A.<br />

DESCRIPTION PART # SUG. RETAIL<br />

Diamond Star headlight module 2050-0114 $74.95<br />

Single H4 harness 2050-0115 12.95<br />

Dual H4 harness 2050-0116 14.95<br />

TRI STAR AND<br />

TRI STAR XP<br />

MODULES<br />

WITH LOAD<br />

EQUALIZERS<br />

•Converts rear turn signal<br />

lights to function as<br />

2050‐0133<br />

additional brake lights<br />

•If a turn signal is applied,<br />

it has priority over the brake light function on the side that is selected.<br />

If the turn signal is canceled and the brakes are still applied, the brake<br />

light functions of the turn signal lights illuminate steady on<br />

•Included dual-load equalizer is designed to fix the problem when stock<br />

turn signals are changed to LEDs and they flash quickly or not at all<br />

•Solid-state electrical components with weather-proof, soft cell<br />

technology to prevent wire damage<br />

•Tri Star XP version with running lights sends partial intensity power to<br />

turn signals to act as additional running lights<br />

•Made in the U.S.A.<br />

MODEL & YEAR PART # SUG. RETAIL<br />

Tri-Star module and load equalizer 2050-0132 $59.95<br />

Tri-Star XP module w/ running lights and load equalizer 2050-0133 64.95<br />

PENTA STAR MODULE<br />

2050‐0117<br />

SELF-CANCELING<br />

TURN SIGNAL MODULE<br />

2014 PARTS UNLIMITED <strong>STREET</strong><br />

DESCRIPTION PART # SUG. RETAIL<br />

Universal harness (for models w/ mixed connectors or<br />

any model w/o specific Plug-and-Play harness) 2050-0117 $12.95<br />

Dual H7 harness for PART #2050-0114 2050-0136 19.95<br />

DUAL-LOAD EQUALIZER<br />

•Module combines all of the<br />

functions of the self-canceling turn<br />

signal module and Tri-Star module<br />

converting rear turn signals to<br />

function as additional brake lights<br />

•When the brakes are applied, the turn<br />

signal lights illuminate; if a turn signal is applied, it has priority over<br />

the brake light function on the side that is selected; if the turn signal<br />

is canceled and the brakes are still applied, the brake light functions of<br />

the turn signal lights illuminate steady on<br />

•Flash time is consistent whether using incandescent or LED lighting;<br />

non-load dependent<br />

•All flash modes can be canceled with a second push of the<br />

turn signal button<br />

•Solid-state electrical components with weather-proof, soft cell<br />

technology to prevent wire damage<br />

•Made for custom builders or to retro-fit motorcycles not already<br />

equipped with self-canceling turn signals<br />

•Made in the U.S.A.<br />

NOTE: Will not work on models with left and right turn signal switch built into<br />

one unit that requires push to cancel.<br />

SUG. RETAIL ............$99.95 PART # 2050-0137 SUG. RETAIL ............$74.95<br />

2050‐0136<br />

•Allows conversion of stock<br />

incandescent turn signals to LED;<br />

keeps signals flashing at stock rate<br />

•Solid-state electronics<br />

•Weather-proof, soft-cell technology<br />

to prevent wire damage<br />

•Measures 2 1 /4” L x 1 5 /8” W x 5 /8” H<br />

•On late model H-D equipped with<br />

factory security system, the security<br />

key light will still be lit; the system<br />

will still function fully and will not be<br />

damaged by using the dual-load equalizer<br />

•Installs easily with included double-sided tape<br />

•Made in the U.S.A.<br />

PART # 2050-0064<br />

SUG. RETAIL ............$19.95<br />

•Perfect for custom builds or<br />

retrofitting models without selfcanceling<br />

turn signals<br />

•Features three turn signal timing<br />

modes: a one-second press of the<br />

turn signal button causes seven<br />

seconds of turn signal flash before<br />

self-cancel, a two-second press<br />

causes 20 seconds of flash before<br />

self-cancel and a four-second press<br />

causes 75 seconds of flash<br />

before self-cancel<br />

•All flash modes can be canceled<br />

with a second push of the turn signal button<br />

•Flash time is consistent whether using incandescent or LED lighting<br />

•Simultaneous depression of right and left turn signal buttons for one<br />

second begins hazard mode; flash continues until manually canceled<br />

•Solid-state electrical components with weather-proof, soft cell<br />

technology to prevent wire damage<br />

•Runs from 12V power source at 6A per channel<br />

•Measures 2 1 /4” L x 1 5 /8” W x 5 /8” H<br />

•Mounts easily with included double-sided tape<br />

•Designed for use with individual momentary-type turn signal switches<br />

mounted on left and right bars; will not work on models with left and<br />

right turn signal switch built into one unit that requires push to cancel<br />

•Made in the U.S.A.<br />

PART # 2050-0061<br />

All part numbers in BOLD MAGENTA<br />

are new this year.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!