AdrenalineMoto - PU STREET 2014.pdf.pdf

FAIRINGS & BODY
www.partsnetweb.com
EXHAUST
LUGGAGE
AUDIO &
VIDEO
COVERS &
SECURITY
GENERAL
ACCESSORIES
WINDSHIELDS
FAIRINGS &
BODY
SEATS &
SISSY BARS
FULL RADIUS
THREADED STEEL BUNGS
•These full radius steel bungs are
1” long x 3 /4” diameter
•These are a great bung for blind threaded items
like fender mounts or struts or anything else you
can think of
•Available in 5 /16”‐18 or 3 /8”‐16 thread
•Sold in 4‐packs
•Made in the U.S.A.
0502‐0452
SUG. RETAIL ............$18.95
DESCRIPTION PART #
5 /16”‐18 0502‐0452
3 /8”‐16 0502‐0449
COUNTERBORE
STEEL BUNGS FOR
ALLEN HEAD BOLTS
•These are great as they allow for very clean
mounting; the head of a standard Allen bolt will
fit flush inside
•The outside measurements are 3 /4” diameter and 0502‐0450
3
/4” long
•Available for 5 /16” or 3 /8” Allen bolts
•Sold in 4‐packs
•Made in the U.S.A. SUG. RETAIL ............$17.95
DESCRIPTION PART #
For 5 /16” Allens 0502‐0450
For 3 /8” Allens 0502‐0443
HANDLEBARS &
HAND CONTROLS
FOOTPEGS &
FOOT CONTROLS
LIGHTING
ELECTRICAL
& GAUGES
SPROCKETS
0502‐0471
0502‐0474
UNIVERSAL MOUNTING TABS
0502‐0475
•Save time and aggravation with these 1 /8” thick mild steel tabs
•Perfect for mounts of all sorts
•Sold in 4‐packs
•Made in the U.S.A.
SUG. RETAIL ............$13.95
DESCRIPTION PART #
1.5” wide x 1.25” tall, .25” hole 0502‐0471
1” wide x 3.5” tall, .25” hole 0502‐0474
1.5” wide x 1.25” tall, .25” hole 0502‐0475
0701‐0711
CHAINS
WHEELS &
ACCESSORIES
BRAKES
SUSPENSION
ENGINE
FUEL/AIR
SYSTEMS
CHEMICALS
& LUBES
RUBBER MOUNT
FINGER TABS
•These weld‐on finger tabs give you a
tough mount with the added comfort
of a military‐spec rubber grommet
•The 1 /4” thick steel will handle the
weight of your oil tank or gas tank
with ease, and the custom‐machined 0502‐0469
spacer keeps the squish right where
you need it
•The supplied 5 /16”‐18 x 1” chrome button‐head Allen bolt nestles right in
and looks great
•These tabs are 3 1 /2” long by 1 1 /4” wide, from the flat to the bolt
center is 2.9”
•Available with your choice of brass or aluminum insert
•Also available in 1 /8” thick steel
•Sold each
•Made in the U.S.A.
SUG. RETAIL ............$18.95
DESCRIPTION PART # DESCRIPTION PART #
1 /4” thick w/ alloy insert 0502‐0469 1 /8” thick w/ alloy insert 0502‐0473
1 /4” thick w/ brass insert 0502‐0472
0701‐0710
HARDWARE
& TOOLS
TRANSPORT &
TRAILER
MERCHANDISING
CROSS
REFERENCE
INDEX
360
RUBBER MOUNT
TRIANGULAR TABS
•Same idea as Lowbrow’s finger tabs, but with
a different shape
•These tabs are 2” long x 2 1 /2” wide, flat to the
bolt center is 1.4”
•The supplied 5 /16”‐18 x 1” chrome buttonhead
Allen bolt nestles right in and
looks great
•Available with your choice of brass or
aluminum insert
•Sold each
•Made in the U.S.A.
DESCRIPTION PART #
1 /4” thick w/ alloy insert 0502‐0470
0502‐0470
SUG. RETAIL ............$18.95
DESCRIPTION PART #
1 /4” thick w/ brass insert 0502‐0477
2014 PARTS UNLIMITED STREET
P‐NUT TANKS
•P‐nut tanks offer 2 gallon capacity
•Include 1 /4” petcock bungs and undrilled DIY mounting tabs for
custom installation
•Made from heavy gauge 1mm steel (approximately 19 gauge)
•Pressure tested
•Available with mounting tabs welded and not welded to the tank
•Tank measures 14 1 /2” L (16 3 /4” end of tab to end of tab) x 7 1 /2” T
(8 3 /8” to top of filler bung) x 8 3 /4” W (at the widest point)
•Tunnel measures 1 3 /4” W x 2 1 /4” D at the tank rear and 5 3 /4” D at the
front of tunnel
•Accept most British‐style gas caps SUG. RETAIL .........$169.95
DESCRIPTION PART #
W/ unwelded mounting tabs 0701‐0711
W/ welded mounting tabs 0701‐0710
All part numbers in BOLD MAGENTA
are new this year.