AUCTION CATALOGUE

AUCTION CATALOGUE
By order of The Joint Administrators, G.P.Rowley andJ.N.Whitfield of RSM Robson
Rhodes. Re: McCourt Fine Meats Limited (In Administration)
LIVE AND WEBCAST AUCTION
ENTIRE CONTENTS OF MEAT PROCESSING FACTORY
To Be Sold In Lots At: Commercial Road Industrial Estate, March,
Cambridgeshire, PE15 8QP, UK
On: Tuesday 15 th June 2004
At 11.00am
On View: Monday 14 th June 2004 9.30am to 5.00pm
and on morning of sale

CONDITIONS OF SALE
1. These Conditions together with those set out in the Notice to Purchasers appearing in this catalogue are
the only terms and conditions subject to which Henry Butcher International Limited (”the Auctioneer”) as
agent for the Vendor will sell goods to a purchaser (“the Bidder”) and all other conditions, whether express,
or implied at common law or by statute as are capable of lawful exclusion are hereby excluded.
2. The Auctioneer may at its discretion or upon the instruction of the Vendor:
(a) Alter or withdraw all or any lots referred to in this auction catalogue up to the moment at which the
hammer falls in relation to such lot(s).
(b) Where a reserve has been placed on any lot, withdraw that lot in the event that the highest bid price
does not meet the reserve.
(c) Where two or more consecutive lots are similar in quantity and description offer a choice on any
subsequent lots to the bidder at the same price.
(d) Bid for any lot or lots offered for sale at the Auction.
3. Each lot shall be sold to the highest bidder and in the event of any dispute arising between bidders
such dispute shall be dealt with in such manner as the Auctioneer may in its absolute discretion
determine.
4. Bidding shall be regulated by the Auctioneer in such manner as it may think fit and, without prejudice to
the generality of the foregoing the Auctioneer may without ascribing any reason therefore, refuse to
accept any bid or may itself bid for the lot in question on behalf of any third party.
5. The Purchaser will pay to the Auctioneer such premium on the “Hammer Price” as stipulated in the
Notice To Purchasers attached hereto, to which will be added Value Added Tax (“VAT”) at the current
rate. The premium is not negotiable and is payable by all purchasers. The Auctioneer, when acting as
agent for the Vendor, may also receive commission from the Vendor.
6. (a) Immediately following the fall of the hammer the Bidder may be required to pay the Auctioneer in
cash or in whatever form the Auctioneer may agree 25 per cent of the price of each lot which it has
purchased and will supply the Auctioneer with whatever information the latter may require concerning
the identity and place of abode/incorporation/centre of main business interest of the Bidder. Deposits
paid hereunder shall be held by the Auctioneer as general deposit for all lots purchased by the Bidder
at the sale;
(b) The balance of purchase monies due will be paid to the Auctioneer on or before the date specified
in the Notice to Purchasers.
(c) All lots will be cleared by the Bidder from the premises at which they are sold (subject to the
conditions set out in Paragraph 7 hereof) not later than the time and date specified in the Notice to
Purchasers and this condition shall be of the essence of the contract.
(d) Should the Bidder fail to comply with any of the foregoing requirements the lot or lots which have
been knocked down to him or any part thereof may be re-offered for sale, destroyed or otherwise
disposed of by the Auctioneer in any manner as it shall in its absolute discretion deem fit, and any
deposits paid shall be forfeit;
(e) Without prejudice to any claims that the Auctioneer and/or the Vendor may have against the Bidder
for breach of contract or otherwise the Bidder will become liable from the expiration of the time referred
to in Paragraph 6(c) hereof for all storage, security and administration expenses and the cost of and
incidental to re-selling and/or otherwise disposing of uncleared items.
7. (a) The Bidder will only remove lots from the Vendor’s premises by previous arrangement with, and
subject to the supervision of, the Auctioneer or its appointed representative(s);
(b) The Bidder will not be permitted to remove any lots it has purchased from the Vendor’s premises
until all sums due in respect thereof have been paid;
(c) If, in the Auctioneer’s opinion, removal of any lot or part thereof will be likely to cause serious
damage to the Vendor’s premises, or any other damage which the Bidder is either unable or unwilling
to rectify, the Auctioneer may by notice to the Bidder rescind the sale of such lot or permit the removal
thereof from the premises to proceed subject to such conditions as it may think fit to impose pursuant
to Paragraph 8 hereof;

(d) Should any party claim possession of or title to all or part of a lot prior to its removal from the
Vendor’s premises, the Auctioneer reserves the right to rescind the sale thereof or to permit the
removal thereof from the Vendor’s premises subject to such conditions as it may see fit to impose.
8. The Bidder will be responsible for all damage that it, its carriers or its agents may do to the property of
any third party (and in particular, to the Vendor’s premises) in removing the lot(s) it has purchased.
Should the Auctioneer consider such damage likely to occur, it may require the Bidder to deposit such
sum of money with the Auctioneer, by way of security for the costs of reinstating that part of the
premises likely to be damaged by the removal of a lot, as the Auctioneer may require. Should the
Bidder refuse to deposit such monies, the Auctioneer may refuse the Bidder access to the Vendor’s
premises for the purpose of collecting all or any of the lots it has purchased, or rescind the sale of such
lot pursuant to Clause 7(c) above.
9. (a) The Bidder is on risk once the hammer falls and is strongly advised to effect insurance at once.
Upon the fall of the hammer the Bidder shall assume all risks in and relating to such lots. The Bidder is
advised to effect in respect of all such risks arising thereafter any insurance it may consider necessary.
The duty of the Auctioneer and/or the Vendor to deliver lots shall be deemed performed upon the fall of
the hammer even if a lot is subsequently damaged and/or part thereof has been lost.
(b) Property in each lot shall not pass to the Bidder until (i) full payment therefore has been made or
(where payment or part payment is made by cheque) until the cheque(s) in question have been cleared
and (ii) each such lot has been removed from the premises in its entirety.
10. The Vendor and the Auctioneer shall not be liable in respect of any claim whether in contract or in tort
(other than claims in respect of injury to persons arising out of the negligence of the Vendor or
Auctioneer) by the Bidder arising out of or in, any way in connection with the sale or purported sale of
all or any of the goods for any sum exceeding the amount of the deposit or purchase price (as the case
may be) paid by the Bidder in respect of the goods which are the subject of the claim.
11. All goods are sold with all faults and imperfections and errors of description. Illustrations in catalogues
are for identification only. The Auctioneer has used its reasonable endeavours to ensure that the
description of each lot(s) appearing in this catalogue are accurate, but the Bidder relies upon such
description at its own risk. Bidders should satisfy themselves prior to the sale as to the condition of the
lot and should exercise and rely on their judgment as to whether the lot accords with its description. No
lots sold in this catalogue are sold as new. Subject to the obligations accepted by the Auctioneer under
these conditions of sale neither the Vendor, the Auctioneer or its servants or agents is responsible for
errors of description or for the genuineness or authenticity of any lot and no warranty whatever is given
by the Auctioneer, its servants or agents or the Vendor to the Bidder in respect of any lot and any
express or implied conditions or warranties are hereby excluded.
12. The price at which the Bidder purchases each lot will be exclusive of the premium (payable under
clause 5) and VAT. Where the Bidder intends any lot to be exported outside the UK a refund of VAT
will (subject to what-ever regulations made from time to time may be in force) be available upon the
production by the Bidder of such proof of the export as the Auctioneer may require.
13. The Vendor and the Auctioneer hereby severally exclude liability for any accident or injury, howsoever
arising, sustained by any person or persons who may attend at the premises for the purpose of the
auction, inspection, purchase, collection or any other business.
14. Certain lots have been included on behalf of other clients in this sale by kind permission of the Vendor.
15. Delivery of lot(s) purchased by the Bidder (which shall be at the sole expense of the Bidder) may not be
required by him outside normal business hours and is to be made within a reasonable time following
payment in full. In determining what is a reasonable time just allowance shall be made for all relevant
contingencies which may arise otherwise than by the negligence of the Vendor or the Auctioneer, and
in particular, but without prejudice to the generality of the foregoing, for any suspension or failure of
material services, civil commotion, strike or other industrial action, or other impediment to normal
delivery outside the control of the Vendor or the Auctioneer. Neither the Vendor nor the Auctioneer
shall be required to incur any expense towards overcoming such impediment unless indemnified there
from and put in funds to meet such expense by the Bidder. The Auctioneer shall not be obliged to take

any legal proceedings for the removal of any such aforesaid impediment to delivery of lot(s) which
might in its own judgement exacerbate the matter or be detrimental to its own reputation or goodwill.
16. It is expressly brought to the Bidder’s attention that, at the time of sale, any item of plant, machinery or
equipment contained in the lot(s) may not necessarily comply with the Health and Safety at Work Etc.
Act 1974, Environmental Protection Act 1990 or any other UK and/or EEC Act or Acts or Regulations
there under governing the use of that plant, machinery or equipment in a working environment.
Successful Bidders for any such plant, machinery or equipment are hereby required to ensure that the
use of any such plant and equipment at a place of work within the UK or EEC does not contravene
such relevant Act or Regulation there under applicable thereto. The Purchaser undertakes to take
steps sufficient to ensure the lot will be safe and without risks to Health & Safety when properly used
and thereby relieves the Vendor and Auctioneer from any Health & Safety duties imposed by sub
section 1A of Clause 6 of the Health & Safety 1974 Act.
17. It is expressly brought to the Bidder’s attentions that certain types of plant or main service installations
could contain blue or white asbestos, dangerous chemicals, etc. which if not handled correctly during
their removal from the site could be in breach of the Health and Safety at Work Etc. Act 1974 Section
2-9 and Control of Substances Hazardous to Health Regulations 1988 (COSHH) or any other current
legislations covering the use of such substances in a working environment.
18. The Bidder must comply with all current legislations and regulations in relation to the removal/disposal
of waste including hazardous waste and may be required to satisfy the Auctioneer in relation to their
disposal/removal procedures. Where waste materials are removed all work must be undertaken by an
approved and licensed contractor.
19. Where the Bidder loads any item of plant, machinery or equipment contained in a lot or lots to remove it
from the site, the Auctioneer shall be under no liability whatsoever to the Bidder or any third party for
any damage however so caused by the removal and the Bidder shall be responsible for and indemnify
the Auctioneer against any damage or loss which the Auctioneer may suffer or incur in respect of loss,
damage or injury suffered by the Bidder’s employees or any third party arising from the removal of the
plant, machinery or equipment. The Bidder shall indemnify the Auctioneer against any loss damage
suffered by the Auctioneer which directly or indirectly is attributable to the nature of the plant,
equipment or machinery acquired by the Bidder whether through breakage rust decay, desiccation,
leakage wastage, inherent or latent defect or vice or nature deterioration.
20. The Bidder acknowledges that any software or intellectual property rights attaching to a lot or lots may
not be the property of the Vendor or capable of transfer by the Vendor and that neither the Vendor nor
the Auctioneer is in any way authorising the use by the Bidder of such software or intellectual property
rights and that according any use of such software or exploitation of such intellectual property rights
shall be at the Bidder’s sole risk.
21. These Terms shall be governed by and construed in accordance with the laws of England and any
disputes will be decided only by the English courts.

NOTICE TO PURCHASERS – Tuesday 15 th June 2004
1. Useful Tel. No’s Site Manager: Robert Pendal Tel. +44 (0) 7774 652403
Auction Accounts: Tel +44 (0) 207 098 3718 Fax +44 (0) 207 098 3796
2. Directions: From the North – Exit A1 onto A47 towards Peterborough. After Approx 25 miles turn
right onto A141 signposted March. At the next roundabout (approx 3.5 miles) take 1 st
Exit signposted March. After approx ½ mile turn left onto Hundred Road Industrial
Estate. (Norwood Road) Carry on over level crossing and the factory can be found after
approx 200 yards on Right hand side.
From the South - Exit Either M11 or A1 at Huntingdon. From Huntingdon pick up signs
A141 March. After Chatteris and Wimblington turn right at second roundabout
signposted March. After approx ½ mile turn left onto Hundred Road Industrial Estate.
(Norwood Road) Then as above
3. Viewing: The Lots may be viewed Monday 14 th June 2004 between the hours of 9.00am to
5.00pm and throughout the sale or if necessary by prior appointment.
4. Refreshments Light refreshments will be available at the sale.
5. Sale Procedure: All Attendees must register giving their full United Kingdom address and telephone
number. All attendees will be asked for secondary forms of identification i.e. Driver’s
License, Bank Reference, etc. Following the completion of registration procedures a
bid card will be issued under which purchases will be made. You are responsible for all
bids made under this number. IMPORTANT – Once a bid number is issued you will
have signed to acknowledge the conditions under which your bid is accepted. If in
doubt, these conditions are available in the catalogue, on the sale site or at any of the
Henry Butcher International Limited Offices.
6. Buyers Premium: The Buyer will pay to the Auctioneer a premium of 12.5% on the “Hammer Price” to
which will be added Value Added Tax at the current rate. The Premium is not
negotiable and is payable by all purchasers. The Auctioneer, when acting as Agent for
the Seller, may also receive Commission from the seller. All items purchased through
the Webcast Facility are subject to a Buyers Premium of 16%.
7. Terms: ALL MONIES DUE MUST BE PAID ON OR BEFORE WEDNESDAY 16 TH JUNE 2004
ON SITE OR AT A HENRY BUTCHER OFFICE. LOTS MAY ONLY BE COLLECTED
UPON RECEIPT OF CLEARED FUNDS:
Cheques and Bank Drafts should be made payable to “Henry Butcher
International Ltd”
Cash, Telegraphic Transfer:
Bank details for telegraphic transfer:
Account: Henry Butcher Client Account 3
Account Number: 2042 0603
Sort Code: 20-37-75
Bank: Barclays Bank Plc
Bank Address: Barclays Bank Business Centre
99 Hatton Garden
London EC1N 8DN
International Swift Code: BARCGB22
Bankers Draft, Building Society cheque - which will be subject to verification.

Cheques – cheques not accompanied by a letter from your bank stating the amount to
which your cheque will be honoured will be subject to a special clearance surcharge of
£10.00.
WE DO NOT ACCEPT CREDIT OR DEBIT CARDS
8. Deposits: In accordance with The Auction Conditions of Sale the Auctioneer reserves the right to
request a deposit to be paid. Non UK buyers must lodge a £500 cash deposit with the
Auctioneer prior to registration. See Notice No. 17 on Motor Vehicles.
9. Buying Order: For the convenience of buyers who may wish to make purchases, but who do not wish
to attend the sale, the auctioneer will arrange to bid on their behalf. Please complete
the form at the rear of this catalogue. The Auctioneer shall not be liable for any
neglect, default or failure in executing bids. There is a minimum bid of £25.00 per lot
and viewing is strongly recommended.
10. Risk: The Bidder is on risk once the hammer falls and is strongly advised to effect insurance
at once.
Purchasers should note that all Henry Butcher lot display boxes are for display
purposes ONLY. They are not intended for transportation of contents.
11. Clearance: All lots to be cleared without fail by Friday 25 th June 2004. Any lots not cleared
Monday 21 st June 2004 will be subject to progress chasing. You should ensure that
any haulier holds sufficient insurance cover for ‘Public Liability and Goods in Transit.’
Copies of the insurance cover should be made available to Henry Butcher Site
Supervisor before removal of goods from site.
Note certain Lots may be available for clearance during the auction at the discretion of
the Site Manager upon receipt of funds.
The premises will be open 9.00am to 4.30pm Monday to Thursday and 9.00am to
2.00pm Friday.
Health & Safety
Depending on the size of the removal programme, it may be that certain projects will
come under the Health & Safety Executive (HSE) assuming the role of the client under
Construction, Design, and Management Regulations 1994 (CDM). This will be where
walls, roofs, or major structural movement may take place. Any plant movement
involving more than a “Lift & Shift” situation needs to be referred to Henry Butcher
International Health & Safety Officer before a “Permit to Work” is issued.
Clearance of all Lots must be undertaken in accordance with current Health and Safety
at Work Regulations and, where necessary, Construction, Design, & Management
Regulations 1994 (CDM). You may have to provide a “Work Method Statement” and
“Risk Assessment” approved by a Henry Butcher Health and Safety Officer via the site
supervisor, prior to the removal of any Lots. Henry Butcher reserve the right to halt
clearance if they feel in their opinion, it is being carried out in an unsafe manner or
without an approved “Method statement” and “Risk assessment”, as stated.
Disconnection/ Oil / Liquid Removal
Electrical disconnections from the MAINS supply are the responsibility of the
purchaser, unless stated otherwise, and MUST be carried out by an Approved
Electrician.
Any fluids remaining in the machine at the time of purchase are the responsibility of the
purchaser and MUST be removed from site to conform with “COSHH” (Control of
Substances Hazardous to Health) regulations.
12. Buyers Choice Where similar lots are indicated in the catalogue the Auctioneer may offer Buyers
Choice. This allows the successful bidder to choose which (or all) lots in a given run
they would like on a per lot basis taken either in or out of sequence.
13. Transfer of Lots The Auctioneer will only accept payment from and permit removal of lots purchased by
the Purchaser successfully bidding at the sale or its agent acting for the purchaser.

14. Value Added Tax Purchasers will be charged Value Added Tax at the current rates on the amount of their
purchases and the buyers premium.
15. Recording Please note this sale is recorded and we reserve the right to use the recordings to
assist with resolving disputes or legal issues as appropriate.
16. Conditions of sale The attention of Purchasers is drawn to the Conditions of Sale included in this
Catalogue
17. Motor Vehicles Purchasers must satisfy themselves and make their own arrangements to ensure
that any vehicles purchased comply with the 1991 Road Traffic Act as well as
any current Road Traffic Legislation. All purchasers will sign an indemnity form
prior to removal and Henry Butcher make no claim or warranty as to the
roadworthiness of any vehicle.
Recorded mileage’s are only given for information purposes and must not be relied
upon as indicating the actual mileage run by any vehicle.
Unless prior arrangements are made with the auctioneers a deposit, the greater of
£250 or 10% of the bid price will be required from the purchaser at the fall of the
hammer.
No vehicles can be collected until the auctioneers receive cleared funds in full.
18. Purchase of The Auctioneers draw to the attention of buyers contemplating purchasing goods
goods through a through a finance company that arrangements should be made well in advance
Finance Company of the Sale so they may make payment in accordance with the Conditions of Sale.
19. Indivisible Loads Successful Purchasers must obtain the necessary permission (i.e. Police, Ministry of
Transport, Local Authority) to transport off site loads (long/wide loads) within sufficient
time prior to the commencement of clearance of those items, in order to comply with
the clearance period as stated in the Notice to Purchasers.
20. Overseas Purchasers
Overseas Purchasers must register showing or providing details of:
1) Their passport(s).
2) One other method confirming their identity, i.e. drivers licence, name, address, UK
Agent (if any), telephone and fax numbers.
3) Full details of their National Bank and their UK corresponding bank.
4) Details from their bank confirming method of payment etc.
Please also ensure that:
5) Your country, or the country to which the items are destined, holds no import
restrictions on the goods that you wish to purchase.
6) The country has no import licence restrictions or a restriction on currency allocation.
7) The country has no prolonged inspection procedure which might cause excessive
delay in allowing your goods to be imported.
8) You receive a fully-descriptive invoice in order that you may arrange payment as
soon as possible with our bank. Barclays Bank Plc, Barclays Bank Business Centre,
Hatton Garden, 99 Hatton Garden, London EC1N 8DN.
9) You employ a reputable freight forwarding organisation. Please note that many of
the machinery removal companies in this country are not necessarily freight
forwarders. We will be pleased to advise accordingly.
10) You have read the Conditions of Sale
21. Please Note: a) We cannot allow removal of any Lot from the Auction Site until our Accounts
Department has received notification from our bankers a) that your payment has been
properly cleared in full. Monies must be transferred to ourselves within the time stated
in the “Notice to a) Purchasers” on the preceding page.

) If there are any special arrangements that you wish to make with us, you must
contact us at least three days before the Sale date.
c) VAT PAYMENT AND RETURNS
Non EEC Purchasers:
All non EEC Purchasers will be charged VAT at the current rate on each Lot
purchased. This will be refunded to you as soon as we receive a copy of the bill of
lading as proof of export. We are unable to refund the VAT on the Buyers Premium
EEC Registered Companies:
Non United Kingdom based companies registered in the European Economic
Community are exempt from VAT except on the Buyers Premium element, subject to
receipt of the following information:
i.. Company name and address.
ii. Telephone / Fax Number
iii. Contact Name / Position
iv. VAT Number
v. The number allocated to you for intra-EC trade (where applicable)
vi. A letter of assurance from a freight forwarder confirming that they will provide
satisfactory documentation proving export.
The above information must be supplied in writing to our office: Brownlow House, 50-
51 High Holborn, London WC1V 6EG. For the attention of Miss Vicky Thomas on your
official Company notepaper and signed by the contact name quoted.
FAILURE TO CONFORM TO ALL OF THE ABOVE WILL RESULT IN VAT BEING
LEVIED AND REFUNDS ONLY BEING MADE UPON RECEIPT OF SATISFACTORY
EXPORT DOCUMENTATION.
If you intend to export your purchases using your own transport (either by Sea or Air)
then VAT will be levied and refunded upon receipt of satisfactory documentation.
Henry Butcher reserve the right to refuse to accept the bid of any attendee
should they be unable to satisfy Henry Butcher on any of the above.

WEBCAST BIDDING
REGISTRATION
1. Go to www.goindustry.com. You will see the McCourt Fine Meats sale listed on the home page.
2. Click the link for McCourt Fine Meats sale and you will be transferred to the auction list.
3. Select the ‘‘register here’’ option and then complete the registration form. Please ensure that you
read and accept the Terms and Conditions of sale.
4. As part of the approval process you are requested to fax the fully completed ‘’Payment Details’’ form
to Henry Butcher at the following no: +44 (0) 207 098 3796
5. Upon approval you will receive an email confirming your participation and containing instructions for
the bidding via the GoIndustry Webcast
PROXY BIDS/ABSENTEE BIDS
Once you have been approved you will have the opportunity to place proxy bids. To do this, please
follow these instructions:
1. Click on the link for proxy bidding that is contained in your approval e-mail.
2. Login using your username and password.
3. Go through the list of lots and enter your bid in the field to the right of the lot description.
4. Activate the ‘’Save’’ button to save your entries before moving on to the next page of lots.
5. When you are finished entering your proxy bids activate the ‘’Submit Proxy Bids’’. This information
will then be sent to Henry Butcher.
6. Please note proxy bidding will be available until 18.00pm BST on the day prior to the start of auction.
ON THE DAY OF SALE
1. Go to www.goindustry.com you will see the McCourt Fine Meats listed on the home page.
2. Click on the link for the McCourt Fine Meat sale and you will be transferred to the auction list.
3. Select the ‘’Login’’ option. This will take you to the login page where you should enter your
username and password.
4. Following from this, a small Java applet (a computer application needed to run WebCast) will be
downloaded onto your computer.
5. Before the Java applet begins to download, you will be asked to accept a certificate of authenticity
from GoIndustry. This assures you that the applet has been sent directly from GoIndustry and is
safe to run on your computer. After clicking on ‘’accept”, the applet will be downloaded and started.
6. You will now see the bidding applet on your screen.
7. There are 2 ways to place a bid:
a. Activate the ‘’Place Bid’’, to place a bid in relation to the auctioneer’s increment.
b. Enter your bid amount in the field and then activate the ‘’Place Bid’’ button.
8. For more detailed bidding instructions we recommend you read the Webcast instructions that you
will find on www.goindustry.com on the auction-listing page in the section ‘’WebCast Instructions’’.
AFTER THE SALE
You will receive your invoice confirming your purchases by fax on the day after the sale. All items
purchased through the Webcast Facility are subject to a Buyers Premium of 16%.
IMPORTANT NOTE:-
The Internet is not foolproof and a number of factors such as the speed of your modem, the
amount of traffic being carried by your service provider and even the integrity of the telephone
connection can affect how you are able to view the sale.
Whilst all efforts have been made to ensure fast data transfer from the site neither Henry
Butcher or GoIndustry can accept responsibility for equipment failure or loss of connection from
the site.
For all other technical enquiries relating to Internet bidding contact:
Henry Butcher IT Support: +44 (0) 207 098 3793
Webcast Payment Enquiries: +44 (0) 7775 697533

RECEPTION
1 A 1575 x 760mm Light
Grey 5 Drawer Double
Pedestal Desk
2 A 1575 x 760mm Light
Grey 3 Drawer Single
Pedestal Desk
3 A Blue Cloth Upholstered
High Back Swivel & Tilt
Armchair
4 A Similar Lot
5 Two Light Blue Cloth
Upholstered Reception
Chairs
6 A Mobile 3 Tier Light Grey
Computer & Printer Unit
7 A 900 x 450 x 1800mm
High Double Door Light
Grey Timber Storage
Cabinet
8 A Similar Lot
9 Blank Lot
OFFICE 1
10 A 2000 x 900mm Walnut
Desk with 1100 x 500mm
Matching Return & 3
Drawer Mobile Pedestal
11 A Blue Cloth Upholstered
Wood Frame High Back
Swivel & Tilt Armchair
12 A 1825 x 900mm Oak
Meeting Table with 4 Blue
Cloth Upholstered
Cantilever Frame Chairs
13 A 1500 x 750mm Light Oak
Table
14 A 840 x 460 x 950mm High
Double Sliding Door
Timber Storage Cabinet &
An Open Front Bookcase
15 A 980 x 540 x 1560mm
High Double Door Timber
Storage Cabinet
16 - 17 Blank Lot
OFFICE 2
18 A 1575 x 760mm Light
Grey 5 Drawer Double
Pedestal Desk
19 A 1575 x 760mm Light
Grey 3 Drawer Single
Pedestal Desk
20 A 1575 x 760mm Light
Grey 2 Drawer Single
Pedestal Desk
21 A Blue Cloth Upholstered
High Back Swivel & Tilt
Armchair
22 A Blue Cloth Upholstered
Low Back Swivel Armchair
& A Typist Swivel Chair
23 A 4 Drawer & A 2 Drawer
Light Grey Metal Filing
Cabinets
24 A 900 x 450 x 1800mm
High Light Grey Double
Door Storage Cabinet
25 An 850 x 450 x 1725mm
High Light Grey Open
Front Lateral
Filing/Bookcase Cabinet
26 A 1075 x 580mm Light
Grey Table with Single
Filing Pedestal
27 A 1200 x 900mm Wall
Mounted Blue Cloth Wood
Frame Notice Board
28 - 29 Blank Lot
OFFICE 3
30 A 1500 x 750mm Light
Grey 6 Drawer Double
Pedestal Desk with Blue
Cloth Upholstered Swivel
Armchair
31 Blank Lot
32 A Mobile Computer &
Printer Table & A Silverline
2 Drawer Filing Cabinet
33 A Silverline 915 x 450 x
1830mm High Grey Metal
Double Door Storage
Cabinet
34 A Similar Lot

35 A Silverline 915 x 450 x
1020mm High Grey Metal
Double Door Storage
Cabinet
36 A Quantity of Office
Sundries
CANTEEN & CORRIDOR
37 A 1400 x 800mm Light Oak
3 Drawer Single Pedestal
Desk & Swivel Chair
38 A 1400 x 800mm Light Oak
3 Drawer Single Pedestal
Desk & Swivel Chair (600 x
800mm)
39 A 1200mm Dia Light Oak
Circular Table with 4
Matching Chairs
40 A 690 x 320 x 1625mm
High Light Oak 4 Shelf
Open Front Bookcase
41 A Similar Lot
42 A Sheerpride 4 Drawer
Vertical Steel Filing
Cabinets
43 - 44 A Similar Lot
45 A Candy Upright
Fridge/Freezer
46 A Sharp 'R-210A'
Microwave Oven & A
Cordless Kettle
47 A PBI Bansensor
'Checkmate 9900' Food
Thermometer
48 An Acroprint '20003' Time
System Clocking In/Out
with Eight-25 Clock Card
Holders
49 A Wall Mounted 22 Watt
Ring Tube Stainless Steel
Insect-o-Cuter
OFFICE EQUIPMENT
50 A Cambridge Computers
Personal Tower
Computer with DVD/CD
Rom, 3.5" Disc Drive,
Monitor, Keyboard,
Mouse & Speakers
51 An Unbranded Personal
Computer with CD Rom
3.5" Disc Drive, Monitor,
Keyboard & Mouse
52 - 55 A Similar Lot
56 A Star Server with
DVD/CD Rom 3.5" Disc
Drive, Hewlett Packard
Superstore 'DAT8' Tape
Drive Monitor &
Keyboard
57 A AMD 'K6III' Personal
Tower Computer with CD
Rom 3.5" Disc Drive,
Monitor, Keyboard &
Mouse
58 An APC Smart 'UPS700'
Uninterruptible Power
Supply & A Netgear DS108
8 Port Dual Speed Hub
59 An Epson Stylus 'C82'
Durabrite Colour Printer
60 An Epson Stylus 'C84'
Colour Printer
61 A Hewlett Packard
'LaserJet 6L' Laser Printer
62 A Hewlett Packard
'DeskJet 720C' Colour
Printer
63 - 64 A Similar Lot
65 An Epson 'LX300+ &
LX300' Dot Matrix Printers
66 A Hewlett Packard
'LaserJet 4L' Laser Printer
67 An Epson 'GT 7000
G680A' Colour Image
Scanner
68 A Mita Pointsource 'Vi
310' Photocopier S/n
019573H (2000)
69 A BT 'PaperJet 50' Plain
Paper Facsimile Machine
S/n D455934 (2003)
70 A Samsung 'SF5500' Plain
Paper Facsimile Machine
71 A '8¼" x 11¾"' A4
Laminator
72 A Sasco '250/2' Overhead
Projector
73 Five Digital Calculators
(Various)

74 A Nobo Easel Mounted
Retractable Screen &
Carrying Case
75 A Blue Cloth Upholstered 8
Board Exhibition Display
Unit & Carrying Case
76 Blank Lot
77 Three Office Fans
(Various)
78 A Similar Lot
79 Two Micromark Swing Arm
Cantilever Table Lights
WEIGH SCALES
80 A Salter Weigh-Tronix
'W1.125' 1500kg
Stainless Steel Digital
Read Out Scales with
1250 x 1250mm Floor
Platform & Loading
Ramp S/n 026497
81 A Salter Weigh-Tronix
'W1.125' 1500kg
Stainless Steel Digital
Read Out Scales with
1250 x 1250mm Floor
Platform S/n 020294
82 A Salter Weigh-Tronix
'W1.125' 50kg Stainless
Steel Digital Read Out 450
x 450mm Platform Scales
S/n 017121
83 A Similar Lot
84 A Salter Weigh-Tronix
'3275' 30kg Stainless Steel
Digital Read Out 350 x
300mm Platform Scales
S/n 018031
85 - 88 A Similar Lot
89 A Salter Weigh-Tronix
'3275' 15kg Stainless Steel
Digital Read Out 350 x
300mm Platform Scales
S/n 018072
90 - 93 A Similar Lot
94 Blank Lot
STAINLESS STEEL
TABLES & EQUIPMENT
95 A Teknomek 'Hygienox'
1500 x 750mm Stainless
Steel Table
96 - 98 A Similar Lot
99 A Teknomek 'Hygienox'
650 x 585mm Stainless
Steel Table with
Undershelf
100 - 103 A Similar Lot
104 A Teknomek 'Hygienox'
600 x 600mm Stainless
Steel Table
105 A Similar Lot
106 A Teknomek 'Hygienox'
670 x 590mm Stainless
Steel Table
107 - 108 A Similar Lot
109 A Teknomek 'Hygienox'
760 x 460mm & 600 x
460mm Stainless Steel
Tables
110 Three Stainless Steel
Tables (Various)
111 A 1830 x 900mm Stainless
Steel Table
112 A Similar Lot
113 A 1760 x 850mm Stainless
Steel Table
114 A 1800 x 900mm Stainless
Steel Table
115 A 1660 x 770mm Stainless
Steel Table
116 A 1700 x 785mm Stainless
Steel Draining Table
117 A 1830 x 760mm Stainless
Steel Table with a Ham
Press & Can Opener
118 A 2370 x 1020mm, 1760 x
840mm & 660 x 580mm
Stainless Steel Table
119 A 2130 x 1050mm
Stainless Steel Draining
Table
120 A 1220 x 920 Stainless
Steel Table
121 A 750 x 600 x 870mm H
Stainless Steel Unit with
Undershelf
122 A 920 x 800 x 900mm H
Mobile Stainless Steel
Trolley
123 A Similar Lot

124 A 860 x 800 x 980 N
Mobile Stainless Steel
Trolley
125 A Similar Lot
126 A Stainless Steel Apron
Holder
127 - 129 A Similar Lot
130 Two Teknomek 'Hygienox'
Stainless Steel Flip Top
Refuse Bag Holders
131 A Similar Lot
132 A Mobile Stainless Steel
Roll Dispenser
133 Five Stainless Steel Bucket
Stands
134 A Similar Lot
135 A 1080 x 1000 x 1775mm
H 3 Tier Stainless Steel
Cleaning Trolley
136 Three Comark 'Evolution
N9092' Temperature Probe
Thermometers
137 Two Comark 'Evolution
N9092' Temperature Probe
Thermometers
138 A Teknomek 'Hygienox'
Single Bay Stainless Steel
Sink with Knee Pedal
Operation
139 A Similar Lot
140 A Teknomek 'Hygienox'
Double Bay Stainless Steel
Sink with Knee Pedal
Operation
141 - 145 A Similar Lot
146 A Bobet Materiels
'LB.ECO' Boot Washer S/n
1158 (2002)
147 A Mobile Stainless Steel
Boot Holder & Two
Stainless Steel Changing
Room Benches
148 - 149 Blank Lot
COOKING RACKS
150 A 1400 x 600 x 1780mm
High 6 Tier Mobile
Stainless Steel Rack
151 - 155 A Similar Lot
156 A 1200 x 800 x 1450mm H
4 Tier Stainless Steel Rack
157 - 167 A Similar Lot
168 Ten Roasting Racks
(Various)
169 - 172 A Similar Lot
173 Four 500 x 500 x 550mm H
Mobile White Plastic
Ingredient Bins with Lid
174 Three 500 x 500 x 550mm
H Mobile White Plastic
Ingredient Bins with Lid
175 Five Plastic Ingredient Bins
(Various)
176 A Similar Lot
177 Fifteen Red Plastic
Stacking Baskets on 2
Stainless Steel Stands
178 Fourteen Red Plastic
Stacking Baskets on 2
Stainless Steel Stands
179 - 180 A Similar Lot
181 Blank Lot
182 Forty Black Stacking
Baskets on 4 Stainless
Steel Bogies
183 Thirty Black Stacking
Baskets on 3 Aluminium
Bogies
184 A Quantity of Baskets,
Bogies, Trolleys & Litter
Bins As Lotted
185 A 'INO 40' 2-20 Watt Tube
Stainless Steel Insect-o-
Cuter
186 A 'NPW 80' 2-40 Watt
Tube Stainless Steel
Insect-o-Cuter
187 - 188 A Similar Lot
189 Two 22 Watt Ring Tube
Stainless Steel Insect-o-
Cuter

REFRIGERATION PLANT
190 A Frascold 'S10.39.Y'
7.5KW, 1450 RPM Twin
Fan R404 Compressor
Set with Two Centauro
'MT/E 4071' Single Fan
Floor Mounted
Evaporators (Cold Store
3) S/n 2B0062631 (2000)
191 A Bitzer 'AV-10-2' 7.5KW,
1450 RPM Twin Fan R22
Compressor Set with
Two Centauro MT-4070
Single Fan Floor
Mounted Evaporators
(Cold Store 3) S/n 487012
(1995)
192-195 Blank Lot
196 A Carlyle '06DR820
DA3900' Twin Fan R22
Refrigerant Compressor
Set with Two Searle
Ceiling Mounted
Evaporators (Packing
Warehouse)
197 An Unknown
'PLG500/0062' Twin Fan
R22 Refrigerant
Compressor Set with Two
Searle Ceiling Mounted
Evaporators (Packing
Warehouse)
198 A Maneurop 'GM80-4ET'
Single Fan R22 Refrigerant
Compressor Set with Two
Searle 'SL126' Triple Fan
Ceiling Mounted
Evaporators (Slicing
Room)
199 A Maneurop 'GM80-4ET'
Single Fan R22 Refrigerant
Compressor Set with Two
Searle 'SR240' Six Fan
Ceiling Mounted
Evaporators (Slicing
Room)
200 Two Unknown 'L200/0037'
Single Fan 134A
Refrigerant Compressor
Sets with Four 'Helpman'
Twin Fan Ceiling Mounted
Evaporators (Cold Store 1)
201 Blank Lot
202 A Frascold 'F519' Twin Fan
R22 Refrigerant
Compressor with Two
Hitec Single Fan
Evaporators (Tumbling
Room) S/n 2D80122
203 A Maneurop 'GM80-4ET'
Single Fan R22 Refrigerant
Compressor with a Roller
'HV5T712' Ceiling Mounted
Twin Fan Evaporators
(Cold Store 2) S/n 96398
204 A Maneurop 'GM64-4DT'
Single Fan R22 Refrigerant
Compressor with Two
Roller 'FHVT412' Ceiling
Mounted Twin Fan
Evaporators (Cold Store 2)
S/n 75222
205 Three Maneurop Single
Fan Refrigerant
Compressors
206 - 209 Blank Lot
PRODUCTION AREA -
LOW RISK AREA
210 A Stainless Steel Boning
Table & Accessories
211 A 600 x 600 x 100mm
Cutting Block on Stainless
Steel Base
212 A Sharpenset 100mm Dia,
1425 RPM Whetstone
Knife Sharpener S/n 30812
213 A HENNEKEN 1500 LTR,
80 - 4000KG VACUUM
TUMBLER
214 - 218 A Similar Lot
219 A Henneken Meat Loader
220 A Similar Lot
221 A HOLSTEIN FUHRMANN
'MA-450-900' 900 LTRS,
350-500KG MAGNUM 980
FULLY AUTOMATED
MEAT MASSAGING UNIT
WITH INJECT STAR
TC20/40 CONTROL S/n
239 (1996)
222 A Lescha 'CN141' 140 LTR
Manual Tipping Tumbler
(Requires Electrical Work)
223 A Weber 'AS450' 400mm
De-Rinder S/n 3582

224 A BUTCHER BOY 'AUMF'
ICED MEAT FLAKER S/n
S188 (1998)
225 A Pokomat 'P30/450' 30-
Needle Brine Injector
with 450mm Wide
Through Feed Stainless
Steel Endless Belt
Conveyor S/n 156.1
226 An Unbranded 61-Needle
Brine Injector with 500mm
Wide Through Feed
Stainless Steel Endless
Belt Conveyor
227 A Butcher Boy 'A56H'
Mincing/Grinding
Machine S/n S275 (1999)
228 A Butcher Boy 'A56HS'
Mincing/Grinding
Machine S/n S251 (1997)
229 A VEMAG 'ROBOT HP10
140/250-B-1' HIGH
PERFORMANCE
VACUUM FILLER WITH
PC 880 PORTION
CONTROL S/n 1400300
230 A Schrofner Vacuum Filler
& Loader (Spares Only)
231 A Mobile Stainless Steel
Loading Tub
232 - 237 A Similar Lot
238 A Tipper Tie 'Techno
Clipper TC 1590 E-N'
Pneumatic Clipper
239 A Tipper Tie 'Techno Pack
TCNV-400R' Pneumatic
Tipper Bag Clipper S/n
2576.371.501
240 A Frampton 'BH12'
Through Feed Bar Marker
S/n 5680040200
241 A Famco Sausage Filling,
Twisting & Cut Off Machine
242 A Hobart Pedestal Mixer
with Bowl & Paddle
243 A Syspal 'Cheetah
512.022.169' 400 x
2000mm Stainless Steel
Encased Endless Belt
Conveyor with
Adjustable Position
Control S/n 40702 (1996)
244 A Scotsman 'MF51A' ASB
2600 Automatic Ice
Maker on Stainless Steel
Support S/n EE11954
(1997)
245 A Caruthers 'SH25003'
Table Top Shredder S/n
SH25042 (1998)
246 An Unbranded 'PTN 400
6464238' Pneumatic
Clipper
247 A Zion 'HL15B' 167 ltr
Refrigerated Display
Cabinet (2001)
248 - 249 Blank Lot
COOKERS
250 A Bastra 2000 x 1000 x
2000mm High (Internal
Dimension) Double
Entrance Two Rack Steam
Cooker with MC500
Controller & Temperature
Recorder
251 A Bastra 2001 x 1000 x
2000mm High (Internal
Dimension) Double
Entrance Two Rack Steam
Cooker with Unitherm
Controller & Chart
Recorder
252 A Bastra 2001 x 1000 x
2000mm High (Internal
Dimension) Double
Entrance Two Rack Steam
Cooker with Unitherm
Controller & Chart
Recorder (Under Repair)
253 A REVORACK 'DOUBLE
D' 3 RACK MULTI
PURPOSE ROASTING
OVEN WITH 21
ROASTING RACKS
(2000)
254 A GRASSELLI 'SL600'
600 X 150MM MEAT
SLICER S/n 7857057137
(1999)
255 AN INAUEN 'VC999 07DK'
950 X 450MM VACUUM
SEALER S/n 07881029

256 AN INAUEN 'VC999
03DKN' 951 X 450MM
MOBILE VACUUM
SEALER
257 A MULTIVAC 'C500' 700 X
650MM SWING LID
DOUBLE VACUUM
SEALER S/n 941 (1999)
258 An Inauen 'VC999 85.47'
Shrink Dip Tank S/n
95T88441
259 A 1200mm Dia Drainer
SLICING AREA
LINE 1
260 A DIXIE UNION
'UNISLICER' 420MM
CAPACITY HIGH SPEED
SLICER & CONTROLLER
WITH IN BUILT
TRANSFER CONVEYOR
S/n 450.2064 (2001)
261 A MULTIVAC 'R230'
THERMOFORM
PACKAGING MACHINE
WITH WITT 100.2 MEM
CO²/N² GAS FLUSH UNIT
S/n 437 (1998)
LINE 2
262 A THURNE 'POLYSLICER
MS' 650MM CAPACITY
INVOLUTE SLICER WITH
WHORLE
PROGRAMMABLE
CONTROL PANEL S/n
15045 (1995)
263 A Thurne 'H13' Involute
Blade Sharpener S/n
23066 (1995)
264 A Thurne 'MC2B' 400 x
3250mm Continuous Belt
Cross Feed Conveyor
with Front & Rear Incline
Adjustment S/n 24494
(1999)
265 A MULTIVAC 'R230'
THERMOFORM
PACKAGING MACHINE
WITH WITT 100.2 MEM
CO²/N² GAS FLUSH UNIT
S/n 865 (2000)
LINE 3
266 A DIXIE UNION 450MM
CAPACITY HIGH SPEED
SLICER WITH DIGITAL
CONTROL PANEL
267 A 300 x 3000mm
Continuous Belt Cross
Feed Conveyor with Front
& Read Incline Adjustment
268 A Multivac 'R5200PC'
Thermoform Packaging
Machine with Witt
'KM100.2M CO²/N² Gas
Flush Unit S/n 2474/100
(1991)
269 A Yang 'Oceania Jolly 40'
Tray Vacuum Sealer S/n
0016042 (2001)
270 A Mobile Stainless Steel
Endless Belt Holder
271 A Heavy Duty Gearbox &
Motor
272 A 500 x 4000mm Stainless
Steel Case Static Plastic
Roller Conveyor
DISPATCH
273 A Herbert 'DIGI DPS 2600'
Label Printer with 25kg
Platform Scale on
Stainless Steel Table
274 A Violi 'THS TRP/16-300'
Self Learner Metal
Detector with 350 x
120mm Aperture & 300 x
1400mm Endless Belt
Conveyor
275 A Loma Systems Metal
Detector with 350 x
75mm Aperture & 325 x
1200mm Endless Belt
Conveyor S/n 894216
276 A Cintex Self Learner
Metal Detector with 350 x
100mm Aperture & 300 x
1700mm Endless Belt
Conveyor (Electrical
Upgrade 2004)

277 A Garvens 'S2' 5000GM
Check Weigher with
Through Feed Conveyor
& Reject Station S/n
320054 (1999)
278 A Etikettie Rtechnik
'MR313' Mobile Labeller
& Printer with Through
Feed Conveyor S/n 17724
(2000)
279 Blank Lot
280 Thirty Two Rolls of
Plastopil 'Plastimat SIL/S1'
0.08mmThick, 355mm
Wide, 600mtr Long Food
Grade Silver Top Film
281 Twenty Four Rolls of
Plastopil 'Plastimat SIL/S1'
0.08mm Thick, 320mm
Wide, 600mtr Long Food
Grade Silver Top Film
282 Twenty Four Rolls of
Plastopil 'Plastimat SIL/S1'
0.08mm Thick, 459mm
Wide, 600mtr Long Food
Grade Silver Top Film
283 Nine Rolls of Plastopil
'Plastimat SIL/S1' 0.08mm
Thick, 459mm Wide,
600mtr Long Food Grade
Silver Top Film
284 Twenty Two Roll of
Plastopil 'Toplex HB-60'
0.06mm Thick, 320mm
Wide, 400mtr Long Food
Grade Clear Top Film & 2
Black Lock Up Bottom Film
285 Twenty Two Roll of
Vulcaflex 'Tecnovil' 400µ
Thick, 322mm Wide,
150mtr Long Food Grade
Clear Film on Pallet
286 Twenty One Rolls of
Vulcaflex 'Tecnovil' 400µ
Thick, 322mm Wide,
150mtr Long Food Grade
Clear Film on Pallet
287 Twenty Two Roll of
Vulcaflex 'Tecnovil' 400µ
Thick, 359mm Wide, 19-
125mtr & 3-75mtr Long
Food Grade Clear Film on
Pallet
288 Twenty Two Roll of
Vulcaflex 'Tecnovil' 400µ
Thick, 359mm Wide,
130mtr Long Food Grade
Clear Film on Pallet
289 Twenty Two Roll of
Vulcaflex 'Tecnovil' 400µ
Thick, 460mm Wide,
105mtr Long Food Grade
Clear Film on Pallet
290 Nineteen Rolls of Vulcaflex
'Tecnovil' 400µ Thick,
460mm Wide, 105mtr Long
Food Grade Clear Film on
Pallet
291 Twenty Rolls of Ongropack
'L-300/008' 462 x 0.36
Food Grade Bottom Clear
Film on Pallet
292 Ten Rolls of Ongropack 'L-
300/008' 462 x 0.36 Food
Grade Bottom Clear Film
on Pallet
293 Eighteen Rolls of
Ongropack 104µ Food
Grade Bottom Clear Film
on Pallet
294 Twelve Rolls of Ongropack
125µ Food Grade Bottom
Clear Film on Pallet
295 Two Pallets of Blue Plastic
Food Preparation Sheet for
Stainless Steel Tables
296 - 299 Blank Lot
300 An Atlas Copco 'GA15FF'
7.5 BA 3000 RPM Air &
Water Cooled Packaged
Air Compressor with
Electric Regulator S/n
A11219516 (1995)
301 A Rednals '87/404 EEC'
200LTR 12BA Welded Mild
Steel Air Receiver S/n
5333/001 (1995)
302 A Byworth 100PSI Gas
Fired Steam Raising Boiler
& Water Softening Plant
with Softening Salt S/n
150073 (1984)
303 - 309 Blank Lot

COMMERCIAL VEHICLES
310 A Mercedes Sprinter '312D
MWB' MWB Refrigerated
Van, Registration R487
NEG, Mileage 242384
Miles (1998)
311 A Volvo 'FL618' with 25ft
Thermo King
Refrigerated Box,
Sleeper Cab, Registration
T630 AER, Mileage
444,216km (1999)
312 A Volvo 'FLC' 4 X 2
Refrigerated Box Lorry,
Registration V223 GCE,
Mileage 114,010km (2000)
313 An Iveco Cargo
'ML75E18' Extended
Refrigerated Box Lorry,
Registration AE51 GVC,
Mileage 207,365km (2001)
314 A Iveco Cargo '7SE15'
Refrigerated Box Lorry with
Day Cab, Registration
S862 BAV, Mileage 332,
649km (1998)
315 A Volkswagen Passat '1.9
Tdi SE' 4 Door Saloon
Car, Registration T992
YTT, Mileage 122,441km
(1999)
END OF SALE

PURCHASERS BUYING ORDER
For the convenience of Buyers who may wish to make purchases, but who do not wish to attend
the sale, the Auctioneer will arrange to bid on their behalf if the orders are sent in on the subjoined
form. A prior inspection on the specified View Days is, however, advised.
The Auctioneers shall not be liable for any neglect, default or failure in executing bids nor any
liability arising thereto.
Date .........................................
To: Henry Butcher
New London Bridge House
25 London Bridge Street
London, SE1 9BQ
Tel: +44 (0) 20 7098 3700
Fax: +44 (0) 20 7098 3795
e-mail: sales@henrybutcher.com
Please bid on our behalf at the below-named sale for any undermentioned lots, at or under the limit
marked against them.
We enclose a cheque for £ ............... being 25% of the estimated amounts of the purchase money,
and in event of you buying any lots for us we undertake to pay for, and remove, the goods in
conformity with the Conditions of Sale and Notice to Purchasers.
Location Town of Sale
March, Cambridgeshire
Date of Sale
Tuesday 15 th June 2004
Lot Description Limit of Price
This order is given on the understanding that a 12½% Buyer's Premium plus Value Added Tax will
be levied on the "Hammer Price" and will be charged over and above the limit placed by you on
this order.
Name .................................................................................
Address .................................................................................
.................................................................................
Telephone ........................................ Signature ...............................................
Fax ……………………………… E-mail: ……………………………......……
A MINIMUM BID OF £25.00 PER LOT WILL ONLY BE ACCEPTED ON THE ABOVE FORM

NOTES
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________