Brocade® Product Training

Port Configuration – (cont’d)
Label Analysis Commands with an “A” and Solve Commands with an “S”:
12
1 2
3
Topology Related
Commands
Trunking Related
Commands
Speed Related
Commands
configshow
version 4
version 4
licenseshow 1
licenseshow switchcfgspeed
portshow
portcfgtrunk portcfgspeed
portcfglport
switchcfgtrunk portcfglongdistance
portcfggport
trunkshow
licenseshow
portcfgeport
islshow
portshow
fabricshow
trunkdebug
Web Tools
topologyshow
Web Tools
Check HBA
configuration 3
portcfgshow 2 , switchshow & portlogdump
© 2005 Brocade Communications Systems, Incorporated.
Revision CFP261-02-2005
Chapter 8 - 12
Footnote 1: licenseshow can be used to validate switch has a full Fabric
license, entry Fabric licenses only allow you to cascade to one other switch.
There are also OEM “special” Fabric licenses that will only allow you to
cascade to “n” switches, where n is defined by OEM. These switches
would have different switch types than those listed under
switchshow in reference guide.
Footnote 2: For FOS versions prior to v3.x use portcfgeport,
portcfglport, and portcfggport to independently view
portcfgshow outputs.
Footnote 3: Check OEM and/or Brocade compatibility matrices for correct driver
version. Check Brocade release notes and Brocade Connect for known issues.
Check HBA manufacturer’s web site release notes and FAQs.
Footnote 4: The version command output can be used to determine if the switch
is capable of performing configuration function. Ex: Switches with less than
v3.x are not capable of speeds greater than 1 Gbit/sec, they are also not capable
of trunking.
© 2005 Brocade Communications Systems, Incorporated.
Revision CFP261-02-2005
Chapter 8 - 12