Brocade® Product Training
Brocade® Product Training
Brocade® Product Training
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
fporttest - Examples<br />
46<br />
v3.x sw1:admin> fporttest 100,8,0xaa55,2, 512<br />
This will execute fporttest 100 times on port 8 with payload pattern 0xaa55,<br />
pattern width 2 (meaning word width) and default payload size 512 bytes<br />
v4.x sw1:admin> fporttest –nframes 100 -ports 1/8<br />
This will execute fporttest with 100 frames on port 8 and default payload size 512<br />
bytes<br />
© 2005 Brocade Communications Systems, Incorporated.<br />
Revision CFP261-02-2005<br />
Chapter 8 - 46<br />
The following operands are optional:<br />
passcount (nframes count) times (or number of frames per port) to execute this test. If omitted, or set to 0<br />
the default value used is 0xfffffffe (or almost infinite for practical purposes) as passCount.<br />
port_number (-ports) The port to run to test on. If omitted, the test will be executed on all online F_Ports<br />
seed Used for the payload pattern<br />
payload_pattern The same as loopporttest<br />
pattern_width The width of the pattern which user specified. It could be 1, 2, and 4 (which are byte, word, and<br />
quad). When payload_pattern is set to 0x00, pattern_width will be ignored.<br />
pattern_size (-size) Number of words of the test packets payload. If omitted, the default value is 512.<br />
© 2005 Brocade Communications Systems, Incorporated.<br />
Revision CFP261-02-2005<br />
Chapter 8 - 46