Brocade® Product Training

v3.1:admin> porttest
Command Example
v3.1:admin> porttest –4,30
48
Test run with 4 ports on switch:
Port 12 contained a loopback adapter
Port 13 was an F_Port attached to a server
Port 14 was an E_Port
Port 15 was an L_port attached to a JBOD
Operand –4,30 used to run the test only against E_Ports, 30 iterations
Possible port types are as follows:
-1 All ports
-2 All L_Ports
-3 All F_Ports
-4 All E_Ports
-5 All N->N loopback ports
stopporttest used to halt test
porttestshow displays the output
© 2005 Brocade Communications Systems, Incorporated.
Revision CFP261-02-2005
Chapter 8 - 48
Sample output from porttestshow (Ports 0-11 are truncated):
Port 13 : PASS
PortType: F PORT
PortState: NO TEST
PortInternalState: INIT
PortTypeToTest: NO_TEST
Pattern: 0xb Seed: 0xaa UserDelay: 10
TotalIteration: 30 CurrentIteration: 0
TotalFail: 0 ConsecutiveFail: 0
StartTime: NONE
StopTime: NONE
Timeout: 0 ErrorCode: 0
Port 14 : PASS
PortType: E PORT(MASTER)
PortState: TEST DONE
PortInternalState: INIT
PortTypeToTest: NO_TEST
Pattern: 0xb Seed: 0xaa UserDelay: 10
TotalIteration: 30 CurrentIteration: 30
TotalFail: 0 ConsecutiveFail: 0
StartTime: Apr 25 11:51:39
StopTime: Apr 25 11:51:50
Timeout: 0 ErrorCode: 0
Port 15 : PASS
PortType: L PORT
PortState: NO TEST
PortInternalState: INIT
PortTypeToTest: NO_TEST
Pattern: 0xb Seed: 0xaa UserDelay: 10
TotalIteration: 30 CurrentIteration: 0
TotalFail: 0 ConsecutiveFail: 0
StartTime: NONE
StopTime: NONE
Timeout: 0 ErrorCode: 0
© 2005 Brocade Communications Systems, Incorporated.
Revision CFP261-02-2005
Chapter 8 - 48