Body Piercing Advice and Safe Practice - Charnwood Borough ...
Body Piercing Advice and Safe Practice - Charnwood Borough ...
Body Piercing Advice and Safe Practice - Charnwood Borough ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
What do I need to do to ensure safe<br />
treatment at my premises? (d)<br />
What about the basics - my work area <strong>and</strong> sink?<br />
■<br />
■<br />
■<br />
■<br />
■<br />
A separate deep sink with hot <strong>and</strong> cold water should be provided exclusively for washing<br />
equipment <strong>and</strong> instruments <strong>and</strong> should be located in a separate ‘dirty’ area, away from the<br />
clean operating area;<br />
Alcoholic h<strong>and</strong> rub (cleanser) should not be used as a substitute for good h<strong>and</strong> washing<br />
<strong>and</strong> should only be used on h<strong>and</strong>s that are already physically clean;<br />
Do ensure the light level where you work is sufficient for your needs. A combination of<br />
natural <strong>and</strong> artificial lighting is ideal;<br />
<strong>Advice</strong> on sharps disposal is provided elsewhere in this document; <strong>and</strong>,<br />
Some businesses are employing air-sanitising equipment to allegedly reduce the risk of<br />
airborne contamination in the work place. These instruments often use proven air filtration,<br />
ozone, or UV technology – <strong>and</strong> sometimes a combination of these - to reduce the level of<br />
airborne microorganisms in workplace air. The need for such air treatments for any skin<br />
piercing premises is, however, unproven, since any infection transmission during these<br />
treatments is unlikely to be via the airborne route. Performance for these instruments may<br />
also vary between manufacturers <strong>and</strong> they can be expensive; such purchases therefore<br />
require careful consideration of specifications, cost <strong>and</strong> benefit.<br />
Guidance for operators / <strong>Body</strong> <strong>Piercing</strong><br />
6