Solenoid valves - Bürkert Fluid Control Systems

7.2.
Cooling water
distribution
Fields of application
In process control, e.g. automatic coating
machines, the individual processes
must be thermally controlled with great
precision. For this reason, the temperatures
and flow rate of the cooling
water downstream of the pressure
chamber are measured. The cooling
circuits are maintained at a constant
level by connecting or disconnecting
individual inlets.
Design
A main manifold in the inlet distributes
the water over three valves. These
valves have a direct connection to the
various cooling ducts. The fourth valve
controls an independent cooling line.
The modular design makes it possible
to implement an extremely wide variety
of expansion stages by simple flangemounting.
This also applies to the return.
Each module in this section contains
one flow meter and one temperature
sensor.
Characteristics
■ VA common lines; valve blocks
made of POM
■ Weight saving due to use of plastic
■ Modular design enables flexible implementation
of an extremely wide
variety of expansion stages
Outlet
Inlet
Outlet, process
Inlet, process
Return
valve block
Supply valve blocks
Components/Function Quantity Typical parameters
■ Retrofitting of expansion stages
possible in fitted condition
■ Front mounting enables optimum
ease of maintenance during operation.
Branch valve
Exhaust valve
Branch module
Supply valve block 3 Different nominal diameters,
Type 6011
seat contour integrated in the blocks
Branch valve, Type 6011 1 Different nominal diameters,
seat contour integrated in the blocks
Branch module 1 - x Flange-mounted distributor block
with integrated check valves
Return valve block 1 - x With integrated flow and temperature sensors
Exhaust valve 1
54/55