Solenoid valves - Bürkert Fluid Control Systems
Solenoid valves - Bürkert Fluid Control Systems
Solenoid valves - Bürkert Fluid Control Systems
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
7.5.<br />
Water block for<br />
compressors<br />
Field of application<br />
The valve block is used in an oil-free<br />
screw compressor with water injection<br />
cooling. The compressor is driven via<br />
V-belt and operates in a closed circuit.<br />
For this purpose, the internal water<br />
supply must be constantly conditioned<br />
and cooled.<br />
Design<br />
The compact valve block consists of a<br />
coated aluminum block with 5 integrated<br />
Type 0280 <strong>valves</strong>, 4 check <strong>valves</strong><br />
made of brass and a flow switch with<br />
flapper sensor. Material and design<br />
also allow use of de-ionized water.<br />
The block has 4 inlets and 3 outlets.<br />
Characteristics<br />
■ Valve block material: coated<br />
aluminum<br />
■ Valve body material: brass<br />
■ Check valve material: brass<br />
■ Seal material: NBR<br />
■ Media: non-potable water,<br />
de-ionized water<br />
■ Media pressure: 0.2 to 16 bar<br />
■ Media temperature: -10 to +90 °C<br />
■ Ambient temperature: max. +55 °C<br />
■ Operating voltage: 230 V, 50 Hz<br />
■ Type of protection: IP 65<br />
Water<br />
Water<br />
distributor<br />
Ion Clean<br />
Off<br />
Pump<br />
E2<br />
E1<br />
E3<br />
E4<br />
RV1<br />
Y7<br />
RV4<br />
Y5 Y3<br />
Y6<br />
RV2<br />
Y8<br />
RV3<br />
F3<br />
A1<br />
A2<br />
A3<br />
Ion Clean<br />
On<br />
Intake<br />
controller<br />
Bearing<br />
injection<br />
Components/Function Quantity Typical parameters<br />
Valve Type 0280 5 DN 13 mm; k v value 4.0 m 3 /h<br />
Check valve 4<br />
Flow switch 1