Profile Rail Linear Guides
Profile Rail Linear Guides
Profile Rail Linear Guides
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Lubrication Inlet Options<br />
<strong>Profile</strong> <strong>Rail</strong> <strong>Linear</strong> <strong>Guides</strong><br />
500 Series Ball<br />
<strong>Profile</strong> <strong>Rail</strong><br />
The standard carriage is supplied with a lubrication<br />
inlet centered over the rail. The carriage has multiple<br />
lubrication inlet point options. The options can be<br />
easily modified on-site in the field or can be supplied<br />
factory direct (Standard inlet hole is M3 for 15mm, M6<br />
for 20mm, 25mm, 30mm 35mm, 45mm). See page 73 for<br />
available lubrication fittings.<br />
Option<br />
ES10<br />
ES11<br />
Inlets on side – both ends– all sides<br />
Inlet on top* – both ends<br />
Notes:<br />
1. * An O-Ring is required to properly seat the mating surfaces to<br />
prevent grease or oil from escaping.<br />
One is supplied with this option.<br />
Size 15 O-ring ID M3 x 1.78mm thick.<br />
Sizes 20–45 O-ring ID M6 x 1.78mm thick.<br />
2. Set screws are installed to plug all holes.<br />
Lubrication inlet locates standard and ES10 option.<br />
Size<br />
Style M1 M3 M4 D1 D2<br />
15<br />
A<br />
C<br />
4 4<br />
E 8 8<br />
4<br />
G 4 4<br />
A<br />
20<br />
B<br />
C<br />
5.2 5.2 5.2<br />
D<br />
G 4.2 4.2 5<br />
A<br />
B<br />
5.5 5.5<br />
C<br />
25<br />
6<br />
D<br />
E<br />
F 9.5 9.5<br />
A<br />
B<br />
30<br />
C 7 7<br />
D<br />
6<br />
E<br />
F<br />
10 10<br />
A<br />
B<br />
7 7<br />
C<br />
35<br />
D<br />
6<br />
E<br />
F<br />
14 14<br />
A<br />
45<br />
B 8 8<br />
E<br />
F<br />
18 18<br />
7.5<br />
All dimensions in mm unless specified.<br />
M3<br />
M6<br />
M3<br />
M6<br />
M6<br />
M6<br />
M6<br />
M3<br />
M3<br />
M3<br />
M6<br />
M6<br />
M6<br />
M6<br />
M 3<br />
M 4<br />
D 2<br />
D 1<br />
M 1<br />
ES10<br />
ES10<br />
ES10<br />
1. D1 and D2 are threaded holes in the end cap to ensure proper<br />
integrity and durability of connection.<br />
2. Carriages are shipped with a grease fitting in the box.<br />
Size 15 include fitting 530LF3, Size 20 and up include fitting 530LN.<br />
See page 68 for more information.<br />
www.thomsonlinear.com 31