Merlin Xtreme Offset pages from McConnel Product Guide

142
Merlin Xtreme Offset
Flail Mowers - Cutting Width 1.2m (3’ 11”), 1.6m (5’ 3”) and 2.0m (6’ 7”)

›››
›››
›››
›››
›››
›››
›››
›››
›››
›››
›››
›››
›››
›››
›››
›››
›››
›››
›››
Machine Features
1.2m, 1.6m and 2.0m cutting widths
Three-point linkage mounting
Front-mounting option
Heavy-duty construction
600mm (2’) hydraulic offset adjustment
120 O of head movement
Over-run PTO protection
Rear roller height adjustment
Replaceable full-length skids
Cutting height of 40mm - 155mm
Maximum cutting diameter
Left or right-hand cut options
Hydraulic floatation system
Safety breakaway
Markets
››› Verge Mowing
››› Verge Mowing
Agricultural
Governmental
Contractors
Description 1.2m
1.6m
2.0m
Cutting width
Maximum width of cut (m)
1.2 (3’ 11”) 1.6 (5’ 3”) 2.0 (6’ 7”)
HP requirement
Minimum hp requirement of tractor
50
60
70
Tractor Requirements
Attachment
3-Point Linkage (CAT II or III)
3 Point Linkage 3 Point Linkage 3 Point Linkage
Weight
Weight of machine (kg)
1010
1060
1150
60hp minimum tractor horsepower
Cutting range (mm)
Maximum and minimum cutting heights 40 - 155
40 - 155
40 - 155
PTO speed
Maximum RPM of PTO shaft
540/1000 540/1000 540/1000
(dependent on model)
Rotor speed
Centre (measured in m per min)
2000rpm
2000rpm
2000rpm
Three-point linkage mounting
Number of flails
J flails on twisted shackle or back-to-back flail 38
48
66
Maximum downward movement
-60 o
-60 o
Maximum upward movement
+90 o
+90 o
+90 o
-60 o
MERLIN XTREME OFFSET
143