Program Information Mobile Hydraulics, Mobile ... - Bosch Rexroth AG

Electrohydraulic Header Height Control EMR
Supplementing the hydraulic systems
with electronics and sensor
systems increases the variety of
uses and harvesting performance of
combine harvesters. Complex controls
make for greater safety and
relieve the burden on the machine
operator.
Functions
- Cutting table guided parallel to
the ground
- Optional: Slope compensation of
the cutting table EMR operation
modes
Operating Modes of the EMR
1. Transport mode:
Active vibration damping of the
cutting table while driving
2. Position control:
Cutting table is maintained in the
preselected position
3. Distance control:
Cutting table is maintained at the
preselected cutting height
4. Ground pressure control:
Cutting table is guided over the
ground with fixed contact pressure
Detailed information:
AN1 RE 95142
PO1 RE 95160
PR2 RE 95138
SRC6-10 on request
EMR Components
Type Designation Min. value Max. value Supply
AN1 Angle sensor +/- 17° +/- 44° 5 ... 12 V
PO1 Position sensor - 10 mm 5 ... 12 V
PR2 Pressure sensor 0...160 bar 250 bar 5 V
SRC6-10 Controller - - 12 V ±30%
103
7