Scangauge 3-IN-ONE user manual.pdf - Jinghang Technology (HK ...
Scangauge 3-IN-ONE user manual.pdf - Jinghang Technology (HK ...
Scangauge 3-IN-ONE user manual.pdf - Jinghang Technology (HK ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
www.hkjinghang.com<br />
These are just some of the variables that limit absolute accuracy and<br />
show why you should never trust a low reading of DISTANCE TO<br />
EMPTY to believe you will be able to make it to the next gas station.<br />
MORE>FILLUP>D<strong>ONE</strong><br />
Pressing D<strong>ONE</strong> resets the TANK trip information and starts the<br />
calibration sequence over. This moves you to the cost entry screen.<br />
< $ 3.00 ><br />
Fuel Cost SAVE><br />
In this screen you can adjust the amount of cost per Gallon/Liter the fuel<br />
cost. You can adjust the amount in $0.01 steps up or down by pressing<br />
the upper right or left buttons. Pressing HOME will leave the cost at the<br />
previous amount. Pressing SAVE will change it to the new amount. Both<br />
actions will return you to the HOME screen.<br />
MORE=>MORE<br />
Pressing MORE twice brings up less commonly used functions.<br />
<br />
MORE>MORE>MODE<br />
This screen allows the operating mode to be read or set.<br />
< PWM ><br />
<br />
In this case, PWM is the current mode. Your display may be different.<br />
Pressing the upper right or left button will allow different protocols to<br />
be chosen. The protocol is not changed until FORCE is pressed. It<br />
should be set this way only if it cannot be determined automatically. See<br />
TROUBLESHOOT<strong>IN</strong>G on page 31 for more information on vehicle<br />
modes.<br />
MORE>MORE>MODE>PIDS<br />
This selection is needed to screen the commands sent to some vehicles<br />
to let them operate correctly.<br />
21<br />
MSN:kathy-tool@hotmail.com<br />
Email:sales@hkjing<br />
Skype:kathy-tool Yahoo:hkjinghang@y
Change language