Documentos normativos - IPQ

DOCUMENTOS
normativos
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
2. Normas Europeias Publicadas
2.1 CEN
Normas Europeias aprovadas na área não eletrotécnica pelo Comité Europeu de Normalização
(CEN), e pelo Comité Europeu para a Normalização do Ferro e do Aço (ECISS).
Para cada referência, menciona-se o comité técnico, a designação codificada e o título.
TC 395
EN 16310:2013 ( Ed. 1 )
Engineering services Terminology to describe engineering services
for buildings, infrastructure and industrial facilities
TC 395
EN 16311:2013 ( Ed. 1 )
Engineering services Terminology to describe engineering services
for industrial products
TC 19
CEN/TR 15993:2013 ( Ed. 2 )
Automotive fuels Ethanol (E85) automotive fuel Background to the
parameters required and their respective limits and determination
TC 19
EN 14274:2013 ( Ed. 2 )
Automotive fuels Assessment of petrol and diesel quality Fuel
quality monitoring system (FQMS)
TC 19
EN 14275:2013 ( Ed. 2 )
Automotive fuels Assessment of petrol and diesel fuel quality
Sampling from retail site pumps and commercial site fuel dispensers
TC 19
EN 16143:2013 ( Ed. 1 )
Petroleum products Determination of content of Benzo(a)pyrene
(BaP) and selected polycyclic aromatic hydrocarbons (PAH) in
extender oils Procedure using double LC cleaning and GC/MS
analysis
TC 23
EN ISO 21007-2:2013 ( Ed. 2 )
Gas cylinders Identification and marking using radio frequency
identification technology Part 2: Numbering schemes for radio
frequency identification
(ISO 21007-2:2013)
TC 33
EN 12428:2013 ( Ed. 2 )
Industrial, commercial and garage doors Thermal transmittance
Requirements for the calculation
TC 33
EN 13126-9:2013 ( Ed. 1 )
Building hardware Requirements and test methods for windows and
door height windows Part 9: Hardware for horizontal and vertical
pivot windows
TC 49
EN 30-1-1:2008+A3:2013 ( Ed. 1 )
Domestic cooking appliances burning gas Part 1-1: Safety - General
TC 50
EN 40-3-1:2013 ( Ed. 2 )
Lighting columns Part 3-1: Design and verification - Specification
for characteristic loads
TC 50
EN 40-3-2:2013 ( Ed. 2 )
Lighting columns Part 3-2: Design and verification - Verification by
testing
TC 50
EN 40-3-3:2013 ( Ed. 2 )
Lighting columns Part 3-3: Design and verification - Verification by
calculation
TC 52
CEN/TR 15371:2013 ( Ed. 3 )
Safety of toys Replies to requests for interpretation of EN 71-1, EN
71-2, and EN 71-8
TC 55
EN ISO 10323:2013 ( Ed. 2 )
Dentistry Bore diameters for rotary instruments such as discs and
wheels
(ISO 10323:2013)
TC 55
EN ISO 13078:2013 ( Ed. 1 )
Dentistry Dental furnace Test method for temperature measurement
with separate thermocouple
(ISO 13078:2013)
TC 69
EN 13774:2013 ( Ed. 2 )
Valves for gas distribution systems with maximum operating
pressure
less than or equal to 16 bar - Performance requirements
TC 88
EN 14303:2009+A1:2013 ( Ed. 1 )
Thermal insulation products for building equipment and industrial
installations Factory made mineral wool (MW) products
Specification
TC 88
EN 14304:2009+A1:2013 ( Ed. 1 )
Thermal insulation products for building equipment and industrial
installations Factory made flexible elastomeric foam (FEF) products
Specification
TC 88
EN 14305:2009+A1:2013 ( Ed. 1 )
Thermal insulation products for building equipment and industrial
installations Factory made cellular glass (CG) products Specification
TC 88
EN 14306:2009+A1:2013 ( Ed. 1 )
Thermal insulation products for building equipment and industrial
installations Factory made calcium silicate (CS) products
Specification
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 15 15 março 2013