Documentos normativos - IPQ

DOCUMENTOS
normativos
TC 165
EN 295-1:2013 ( Ed. 2 )
Vitrified clay pipe systems for drains and sewers Part 1:
Requirements
for pipes, fittings and joints
TC 165
EN 295-2:2013 ( Ed. 2 )
Vitrified clay pipe systems for drains and sewers Part 2: Evaluation
of conformity and sampling
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC 205
EN ISO 8536-5:2013 ( Ed. 2 )
Infusion equipment for medical use Part 5: Burette infusion sets for
single use, gravity feed
(ISO 8536-5:2004)
TC 205
EN ISO 20072:2013 ( Ed. 2 )
Aerosol drug delivery device design verification Requirements and
test methods
(ISO 20072:2009)
TC 165
EN 295-4:2013 ( Ed. 2 )
Vitrified clay pipe systems for drains and sewers Part 4:
Requirements for adaptors, connectors and flexible couplings
TC 165
EN 295-5:2013 ( Ed. 2 )
Vitrified clay pipe systems for drains and sewers Part 5:
Requirements for perforated pipes and fittings
TC 165
EN 295-6:2013 ( Ed. 2 )
Vitrified clay pipes systems for drain and sewers Part 6:
Requirements for components of manholes and inspection chambers
TC 165
EN 295-7:2013 ( Ed. 2 )
Vitrified clay pipe systems for drains and sewers Part 7:
Requirements for pipes and joints for pipe jacking
TC 165
EN 12566-6:2013 ( Ed. 1 )
Small wastewater treatment systems for up to 50 PT Part 6:
Prefabricated treatment units for septic tank effluent
TC 188
EN ISO 14890:2013 ( Ed. 2 )
Conveyor belts Specification for rubber- or plastics-covered
conveyor
belts of textile construction for general use
(ISO 14890:2013)
TC 188
EN ISO 21182:2013 ( Ed. 2 )
Light conveyor belts Determination of the coefficient of friction
(ISO 21182:2013)
TC 192
EN 1846-2:2009+A1:2013 ( Ed. 1 )
Firefighting and rescue service vehicles Part 2: Common
requirements - Safety and performance
TC 205
EN 455-2:2009+A2:2013 ( Ed. 1 )
Medical gloves for single use Part 2: Requirements and testing for
physical properties
TC 205
EN 13795-:2011+A1:2013 ( Ed. 1 )
Surgical drapes, gowns and clean air suits, used as medical devices
for patients, clinical staff and equipment General requirements for
manufacturers, processors and products, test methods, performance
requirements and performance levels
TC 205
EN ISO 8536-4:2013 ( Ed. 4 )
Infusion equipment for medical use Part 4: Infusion sets for single
use, gravity feed
(ISO 8536-4:2010)
TC 205
EN ISO 22413:2013 ( Ed. 2 )
Transfer sets for pharmaceutical preparations Requirements and
test methods
(ISO 22413:2010)
TC 205
EN ISO 23908:2013 ( Ed. 2 )
Sharps injury protection Requirements and test methods Sharps
protection features for single-use hypodermic needles, introducers
for catheters and needles used for blood sampling
(ISO 23908:2011)
TC 216
EN 12353:2013 ( Ed. 3 )
Chemical disinfectants and antiseptics Preservation of test organisms
used for the determination of bactericidal (including Legionella),
mycobactericidal, sporicidal, fungicidal and virucidal (including
bacteriophages) activity
TC 226
EN 1423:2012 /AC :2013 ( Ed. 1 )
Road marking materials Drop on materials Glass beads, antiskid
aggregates and mixtures of the two
TC 231
EN 12786:2013 ( Ed. 2 )
Safety of machinery Requirements for the drafting of the vibration
clauses of safety standards
TC 243
EN ISO 14644-8:2013 ( Ed. 2 )
Cleanrooms and associated controlled environments Part 8:
Classification of air cleanliness by chemical concentration (ACC)
(ISO 14644-8:2013)
TC 246
EN 16306:2013 ( Ed. 1 )
Natural stone test methods Determination of resistance of marble to
thermal and moisture cycles
TC 249
EN ISO 472:2013 ( Ed. 2 )
Plastics Vocabulary
(ISO 472:2013)
TC 250
EN 1991-1-2:2002 /AC :2013 ( Ed. 3 )
Eurocode 1: Actions on structures Part 1-2: General actions - Actions
on structures exposed to fire
TC 250
EN 1991-1-6:2005 /AC :2013 ( Ed. 3 )
Eurocode 1 Actions on structures Part 1-6: General actions -
Actions during execution
TC 250
EN 1998-1:2004 /A 1:2013 ( Ed. 1 )
Eurocode 8: Design of structures for earthquake resistance Part 1:
General rules, seismic actions and rules for buildings
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 17 15 março 2013