Documentos normativos - IPQ

DOCUMENTOS
normativos
Data Limite: 2013-04-29
TC 155
prEN ISO 11297-1:2013
Plastics piping systems for renovation of underground
drainage and sewerage networks under pressure Part 1:
General
(ISO/FDIS 11297-1:2013)
Data Limite: 2013-03-17
TC 155
prEN ISO 11297-3:2013
Plastics piping systems for renovation of underground
drainage and sewerage networks under pressure Part 3:
Lining with close-fit pipes
(ISO/FDIS 11297-3:2013)
Data Limite: 2013-03-17
TC 156
prEN 13141-6:2012
Ventilation for buildings Performance testing of
components/products for residential ventilation Part 6:
Exhaust ventilation system packages used in a single
dwelling
Data Limite: 2013-05-13
TC 156
prEN 13141-11:2012
Ventilation for buildings Performance testing of
components/products for residential ventilation Part 11:
Positive pressure ventilation systems
Data Limite: 2013-05-13
TC 160
prEN 353-1:2012
Personal fall protection equipment Guided type fall
arresters including an anchor line Part 1: Guided type fall
arresters including a rigid anchor line
Data Limite: 2013-04-22
TC 162
prEN 469:2013
Protective clothing for firefighters Performance
requirements for protective clothing for firefighting
Data Limite: 2013-05-17
TC 162
prEN 16523-1:2013
Determination of material resistance to permeation by
chemicals Part 1: Permeation by liquid chemical under
conditions of continuous contact
Data Limite: 2013-06-17
TC 162
prEN ISO 13688:2013
Protective clothing General requirements
(ISO/FDIS 13688:2013)
Data Limite: 2013-03-24
TC 165
prEN 124-1:2012
Gully tops and manhole tops for vehicular and pedestrian
areas Part 1: Classification, general design, performance
and testing requirements, test methods and evaluation of
conformity
Data Limite: 2013-04-08
TC 165
prEN 124-2:2012
Gully tops and manhole tops for vehicular and pedestrian
areas Part 2: Gully tops and manhole tops made of cast
iron
Data Limite: 2013-04-08
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
TC 165
prEN 124-3:2012
Gully tops and manhole tops for vehicular and pedestrian
areas Part 3: Gully tops and manhole tops made from
steel or aluminium alloy
Data Limite: 2013-04-08
TC 165
prEN 124-4:2012
Gully tops and manhole tops for vehicular and pedestrian
areas Part 4: Gully tops and manhole tops made of steel
reinforced concrete
Data Limite: 2013-04-08
TC 165
prEN 124-5:2012
Gully tops and manhole tops for vehicular and
pedestrian areas Part 5: Gully tops and manhole tops
made of composite
Data Limite: 2013-04-08
TC 165
prEN 124-6:2012
Gully tops and manhole tops for vehicular and
pedestrian areas Part 6: Gully tops and manhole tops
made of Polypropylene (PP), Polypropylene with mineral
modifiers (PP-MD), Polyethylene (PE) or
Polyvinyl-chloride (PVC-U)
Data Limite: 2013-04-08
TC 165
prEN 1253-1:2013
Gullies for buildings Part 1: Trapped floor gullies with a
depth water seal of at least 50 mm
Data Limite: 2013-04-14
TC 165
prEN 1253-2:2013
Gullies for buildings Part 2: Roof drains and floor gullies
without trap
Data Limite: 2013-07-07
TC 165
prEN 16506:2012
Systems for renovation of drains and sewers Lining with
a rigidly anchored plastics inner layer (RAPL)
Data Limite: 2013-04-15
TC 166
prEN 16497-1:2012
Chimneys Concrete System Chimneys Part 1:
Non-balanced flue applications
Data Limite: 2013-03-11
TC 170
prEN ISO 10343:2012
Ophthalmic instruments Ophthalmometers
(ISO/DIS 10343:2012)
Data Limite: 2013-05-13
TC 170
prEN ISO 15798:2012
Ophthalmic implants Ophthalmic viscosurgical devices
(ISO/FDIS 15798:2012)
Data Limite: 2013-03-01
TC 172
prEN ISO 217:2013
Paper Untrimmed sizes Designation and tolerances for
primary and supplementary ranges, and indication of
machine direction (ISO/FDIS 217:2013)
Data Limite: 2013-05-21
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 37 15 março 2013