Avid NewsCutter XP User's Guide

The Create Tone Media dialog box appears.
2. Set the appropriate calibration tone parameters in the dialog box.
You can also use the default output tone of –20 dB (digital scale)
with a 1000-Hz signal.
3. Choose a target bin for the tone master clip and a target drive for
the tone media from the pop-up menus.
4. Click OK.
After a few seconds, a master clip appears in the target bin. The
default name reflects the options you chose. You can rename the clip
by typing a new name.
Using the Console to Check Audio Levels
Once you have played back audio through the Audio tool, you can use
the Console window to view a list of precise information about the
peak levels.
To check peak levels in the Console window:
1. Choose Audio Tool from the Tools menu.
The Audio tool opens.
206