Avid NewsCutter XP User's Guide

emap a track to any channel by clicking the channel
assignment display and by choosing another channel.
Bypassing Existing Volume Settings
You can have the system ignore the volume settings established with
the Audio Mix tool when playing back or recording a sequence.
To turn off current volume adjustments, do one of the following:
t
t
Click the Bypass Clip Gain button in the Audio Mix tool.
Click the Clip Gain button in the Bypass area in the Audio tool.
The volume controls disappear.
To restore the previous settings:
t
Deselect the Bypass Clip Gain or the Clip Gain button.
Adjusting Volume While Playing an Audio Mix Effect
You can use the Audio Loop Play button to change the volume on an
existing Audio Mix effect while you play the clip.
The Audio Loop Play button appears on several of the audio effect
tools and is also a mappable button in the Command palette.
You can perform the following operations while the system plays the
loop:
• Adjust audio effects.
• Use the Peak Hold pop-up menu in the Audio tool to change
between Peak Hold and Infinite Hold.
• Use the Reset Peak button in the Audio tool.
479