Hitech Pro User Manual English - Tuncmatik

More documents

Recommendations

Info

Never manipulate with your hands or through conducting objects, do not short the battery terminal block or the battery enclosure. • Never short the battery terminals as it involves a high risk. It involves the detriment of the equipment and batteries • Avoid mechanical efforts and impacts • Do not open or mutilate the battery. Released electrolyte is harmful to the skin and eyes. • Do not dispose of batteries in a fire. The batteries may explode. • In case of contact of the acid with parts of the body, wash immediately with plenty water and call urgently the nearest medical service • Batteries involve a serious risk for the health and for the environment. Their disposal should be done according to the existing laws. 4-1-2. To get into account • All the UPS units and the battery packs have terminals as power connection parts, and DB9 connector for the communication channel, located in the inside of the equipment. Follow the steps described next to have access to them: Unlock the lock (CL) with the special given key. Rotate it 45º to clockwise and open the frontal door (PF) completely. DB9 connectors from communication ports and terminals for remote EPO button will be uncovered. Remove the screws (t1), which are fixing the terminal cover (TB) inside of the cabinet and move it away; the power terminals will be uncovered. Model Equipment Maximum input and bypass current, and nominal output current (A) power (kVA) Input 220 V Output Bypass Input 230 V Output Bypass Input 240 V Output Bypass UPS-15 15 66 69 - 64 65 - 60 63 - UPS-20 20 90 90 - 85 87 - 84 84 - UPS-30 30 132 132 - 128 130 - 120 123 - UPS-40 40 177 177 - 170 174 - 159 165 - UPS-50 50 222 222 - 213 217 - 201 204 - UPS-60 60 287 287 - 255 261 - 240 246 - UPS-80 80 357 357 - 340 348 - 323 331 - UPS-15-B 15 66 69 69 64 65 65 60 63 63 UPS-20-B 20 90 90 90 85 87 87 84 84 84 UPS-30-B 30 132 135 135 128 130 130 120 123 123 UPS-40-B 40 177 183 183 170 174 174 159 165 165 UPS-50-B 50 222 228 228 213 217 217 201 204 204 UPS-60-B 60 267 273 273 255 261 261 240 246 246 UPS-80-B 80 357 365 365 340 348 348 323 331 331 Table 1. Input, output and bypass currents for standard single phase voltage UPS.
Maximum input and bypass current, nominal output current (A) Model Power 3x380 V 3x400 V 3x415 V (kVA) Input Output Bypass Input Output Bypass Input Output Bypass UPS-15 15 22 23 - 21 22 - 20 21 - UPS-20 20 30 30 - 28 29 - 28 28 - UPS-30 30 44 45 - 43 43 - 40 41 - UPS-40 40 59 61 - 57 58 - 53 55 - UPS-50 50 74 76 - 71 72 - 67 68 - UPS-60 60 89 91 - 85 87 - 80 82 - UPS-80 80 118 122 - 113 116 - 107 110 - UPS-15-B 15 22 23 23 21 22 22 20 21 21 UPS-20-B 20 30 30 30 28 29 29 28 28 28 UPS-30-B 30 44 45 45 43 43 43 40 41 41 UPS-40-B 40 59 61 61 57 58 58 53 55 55 UPS-50-B 50 74 76 76 71 72 72 67 68 68 UPS-60-B 60 89 91 91 85 87 87 80 82 82 UPS-80-B 80 118 122 122 113 116 116 107 110 110 Table 2. Input, output and bypass currents for standard three phase voltage UPS Once the connection of the UPS is concluded, place back the cover (TB) and close the door (PF) through the lock (CL). • The cable cross section of the bypass, input and output lines shall be determined from the maximum currents for the two first and from nominal ones for the output, by respecting the local and/or country Low Voltage Electro-technical standards • The protections in the distribution board, they will be of the following characteristics: For the lines input and bypass, type B earth leakage breakers and circuit breakers curve C For the output (alimentation loads), circuit breaker curve C • In standard equipments up to 40 kVA, batteries are supplied inside the UPS enclosure and for higher power rates, they are supplied in separate cabinet. By default, the UPS has a battery fuse-holder switch (Q3) with 3 fuses for models up to 40 kVA or battery switch (Q3) for models with higher power rate. Regarding battery cabinet, it has a fuse holder switch (Q8) with 3 fuses, for both models with higher power rate of 40 kVA and for extended back up times. In any case, fuses are supplied together with the documentation. Open fuse holder switch (Q3) or (Q8), install the 3 fuses and WAIT TO CLOSE IT until it is indicated. IMPORTANT FOR YOUR SAFETY: Do not turn the battery fuse holder switch or switch (Q3) located in the equipment or its analogous (Q8) of battery cabinet to “On” (Close), till the equipment is switched on completely, because it can cause irreversible damages to the equipment or accidents.
Page 1 and 2: HI-TECH PRO UNINTERRUPTIBLE POWER S
Page 3 and 4: 5-1-2. Start up procedure 5-2. COMP
Page 5 and 6: 1-2-2. For More Information & Help
Page 7 and 8: * Only in optional version UPS-B (S
Page 9 and 10: * Only in optional version UPS-B (S
Page 11 and 12: 3-1-2. Corresponding legends to the
Page 13 and 14: In equipments with separate bypass
Page 15: 4. INSTALLATION • As this is a de
Page 19 and 20: 4-2-4. Location • In the Instruct
Page 21 and 22: Single phase input / three phase ou
Page 23 and 24: for connecting the UPS with any mac
Page 25 and 26: 5-1-2. Start up procedure. It is ve
Page 27 and 28: are protected through the UPS 5-2.
Page 29 and 30: The UPS supplies output voltage ent
Page 31 and 32: 6-2-1. Messages menus and classific
Page 33 and 34: 6-3-3. ‘‘PARAMETERS’’ level
Page 35 and 36: • Screen 4.1: This alarm indicate
Page 37 and 38: END OF BATTERY LIFE ALARM BATT. TEM
Page 39 and 40: UPS BLOCK (DSP) INTERN.EXE. ERROR U
Page 41 and 42: Positive DC bus voltage over 450V.
Page 43 and 44: hh: hour of deleted alarm mm: minut
Page 45 and 46: 7. ANNEXES 7-1. General Technical S

Hitech Pro User Manual English - Tuncmatik

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?