Product Overview 2010 - Lokshop
Product Overview 2010 - Lokshop
Product Overview 2010 - Lokshop
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
u<br />
ECoSlink Terminal<br />
ECoSlink Terminal - The distributor<br />
If your train layout is growing and you need additional ECoS-<br />
Boost boosters and ECoSDetector feedback modules to connect<br />
to your ECoS command station, and you are running out of<br />
connectors, you should buy the ECoSlink Terminal.<br />
More room<br />
The ECoSlink Terminal will be connected to the ECoS or Central<br />
Station® via the provided bus cable to the „extend“ jack. It offers<br />
on the front panel two jacks for hand controllers (e.g. mobile<br />
station®) and at the back four sockets for devices mounted<br />
under the layout. These include mainly ECoSBoost booster and<br />
ECoSDetector feedback modules.<br />
The ECoSlink Terminal can provide power to all attached devices<br />
either from the ECoS power supply, or for a section from an<br />
external power supply through the ECoSlink themselves.<br />
This is especially useful for larger systems with many hand controls,<br />
boosters and feedback modules.<br />
Ordering information<br />
50093 ECoSLink Terminal bus distribution plate, 6 slave jacks, with 0.9m cable<br />
More distance<br />
If more than one ECoSlink Terminal is used, the terminals can be<br />
connected to each other with standard Ethernet patch cables<br />
with RJ45 connectors. These patch cables can be purchased in<br />
any computer store in any length.<br />
More organisation<br />
Each ECoSlink Terminal is usually at the front panel of the layout<br />
installed: Only the front panel is visible. This reduces the cable<br />
clutter under the layout.<br />
More flexibility<br />
The ECoSlink Terminal can be used on ECoS and Central Station®.<br />
The CAN bus is only passively distributed together with<br />
the supply and booster cables and the termination is ensured.<br />
The function is transparent for the digital control unit. Since an<br />
interference in the communication of the bus does not take<br />
place, thus alone decide the control unit and the connected<br />
devices whether they will work together.<br />
Connetion for further<br />
ECoSlink Terminals<br />
ECoSlink Terminal back<br />
4 ECoSlink jacks for<br />
ECoSBoost or<br />
ECoSDetector<br />
optional, external<br />
bus current supply<br />
ECoSlink Terminal underside ECoSlink Terminal connected with ECoS<br />
13
Change language