Product Overview 2010 - Lokshop
Product Overview 2010 - Lokshop
Product Overview 2010 - Lokshop
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
u<br />
u<br />
Precision Servo Motor<br />
NEW<br />
Precision Servo Motor<br />
The Precision Servo Motor is a high-performance and noiseless<br />
actuator, introduced by ESU, suitable for the SwitchPilot decoders.<br />
It uses a highly-developed remote control (RC) technique<br />
and is perfectly suited for setting in motion all kinds of scenes<br />
on your layout. ESU has put all the experience gained with the<br />
previous servo motor into the new Precision version, which is<br />
better than other servo products, to offer a solution for all the<br />
demands of model railroaders.<br />
Applications<br />
The most important application regarding the Precision Servo<br />
Motor is to throw points. With the help of the Precision Servo<br />
Motor you are able to move your model railway switches like<br />
the original ones: the switch blade moves slowly and powerfully<br />
from one position to another.<br />
While doing this the Precision Servo motor works almost noiselessly<br />
due to the precision gearing made of long-lasting plastic.<br />
It is mere child´s play to motorize railway crossings via the Precision<br />
Servo motor and the SwitchPilot Servo. At last you can let<br />
the gates down at your keyboard in due time. Furthermore the<br />
Servo motor enables you to open and close the doors of your<br />
engine shed by remote control. Thanks to its new electronics<br />
Precision Servo Motor - Metal<br />
NEW<br />
Precision Servo Motor - Metal<br />
ESU proudly presents a further, newly-developed servo motor<br />
for all ambitious model railway fans. The „Precision Servo Motor<br />
- Metal“ is preferred by all model railroaders who look for a<br />
powerful servo with metal gearing. Thanks to its metal gearing<br />
the ESU Precision Servo Motor moves considerably smoother<br />
than other servos, as the ESU product has been optimized for<br />
slow motions.<br />
Mini servo<br />
The most important component of the Precision Servo Motor is<br />
a tiny, 9-gram-light mini servo which has been specially developed<br />
and optimized for all demands of a model railway layout.<br />
Despite its small dimensions of only 26 mm x 13 mm x 24 mm,<br />
it reaches a power of up to 1.0 kg/cm. Its cable length of 30cm<br />
(almost twice as long as cables of other standard servos on the<br />
market) allows for a longer distance between the<br />
servo motor and decoder. Beyond that, an electronic<br />
processor-controlled servo enables a precise<br />
heading for the required position without bucking -<br />
very important for garage doors. The closed current<br />
requirements of the electronics have been mottled<br />
compared to the previous servo motor which preserves<br />
the decoder. However, one of the most important<br />
improvements of the new Precision Servo<br />
Motor has to do with the switching-on: The well-known tremor<br />
when switching on the layout, which occurs with a lot of conventional<br />
RC-servos, is 100% choked during every operation<br />
mode. You will hear absolutely nothing from the servo when<br />
switching your layout on, no railway crossing will bounce.<br />
Accessories<br />
To make the application of the Servo motor as easy as possible,<br />
we include substantial accessories with delivery, which are especially<br />
adjusted to our customers´ needs: among some, diverse<br />
control horns, there is a special servo horn for a direct insert of<br />
the controlling wire. The controlling wire is, of course, included<br />
as well as the mounting screws. The most important accessory is<br />
a special servo holder: it enables you to install the Servo Motor<br />
either horizontally or vertically - depending on the application.<br />
the servo is able to lift nearly twice the load (1.8 kg) of its plastic<br />
gearing brother. Moreover, the „Precision Servo Motor - Metal“<br />
is appropriate for all situations in which splicing and beating<br />
claim high mechanical requirements from the servo and where<br />
the sound development does not play such an important<br />
role.<br />
With the same measurements as the Precision Servo<br />
Motor, the metal gearing is also equipped with<br />
the new, micro-processed control electronics for a<br />
precise, sensitive heading to the required position.<br />
Therefore the impuls suppression makes sure that<br />
there won´t be any tremors on the layout when you<br />
switch it on. The 30cm cables makes easy wiring<br />
possible.<br />
Also, the „Precision Servo Motor - Metal“ comes with innovative and<br />
well-proven accessories such as a servo holder and controlling wires.<br />
Ordering information<br />
NEW ACCESSORY available: Servo Extension Cable<br />
51800 SwitchPilot V1.0, accessory decoder for 4 twin coils magnetic, 2 x Servo, DCC/MM, 1A<br />
51801 SwitchPilot Extension, 4 twin-relays (DPDT) output, 2A each, extension for Switch Pilot V1.0<br />
51802 SwitchPilot Servo V1.0, 4 twin servo decoder, DCC/MM, RailCom®<br />
NEU 51804 Servo Motor, precision mini-servo, micro-controlled with plastic gearing, incl. mounting kit<br />
NEU 51805 Servo Motor, precision mini-servo, micro-controlled with metal gearing, incl. mounting kit<br />
NEU 51810 Servo Extension Cable, 3-pole J/R plug on socket J/R /Futaba, length: 75cm (29.5 inch)<br />
25
Change language