Product Overview 2010 - Lokshop
Product Overview 2010 - Lokshop
Product Overview 2010 - Lokshop
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
How to switch stationary decoders<br />
All in all you can transmit and control up to 8 ECoS keyboards<br />
together with respectively 16 accessories such as turnouts or<br />
signals. The difference between 2, 3 and 4 aspect magnetic-<br />
electronic accessories will be retained.<br />
More fun at play<br />
A dot matrix backlit LCD display always informs you about the<br />
most important operational parameters such as loco address,<br />
loco symbol, speed (in mph or speed steps) as well as function<br />
key status.<br />
The ECoSControl Radio indicates if a loco was assigned by another<br />
operator or if there is an emergency stop on the layout.<br />
Extension<br />
You can use up to 6 ECoSControl Radio remote control units<br />
per receiver module. In this way every family member is able to<br />
control his or her locos independently.<br />
Questions about ECoSControl Radio<br />
Which radio frequency is used by the ECoSControl Radio?<br />
The device works within a 2.4GHz band. That makes operation both in the USA and<br />
Europe possible.<br />
Do the ECoSControl Radio and the mobile control 50100 handheld work together?<br />
Unfortunately not. Due to its different radio frequency the ECoSControl Radio and<br />
the mobile control do not work together.<br />
Will the mobile control handheld still be produced?<br />
No. The ECoSControl Radio is intended to replace the mobile control handheld completely.<br />
However, some remnants might still be available at your retailer‘s shop.<br />
Is it possible to use it in combination with other command stations?<br />
The ECoSControl Radio was especially developed for the use with the ECoS command<br />
station, respectively for the Märklin® Central Station® 60621 with the ESU update V3.0.0<br />
Reloaded. The use with all other command stations is, unfortunately, not possible.<br />
How big is the hand controller?<br />
The size is approximately 18.0cm x 7.5cm x 2.5cm (7.1“x3“x1“) and is compact<br />
enough to be operated even with one hand.<br />
function keys<br />
light funtion<br />
shift key for access<br />
to F11 - F20<br />
Matrix backlit FSTN<br />
LC display wireless radio communication<br />
accessories / loco mode selection menu keys<br />
Included in delivery of ECoSControl Radio<br />
What is the difference betw. the ECoSControl Radio and the Bachmann Dynamis?<br />
ESU developed the Bachmann® Dynamis®, it uses Infra-Red technology to connect<br />
to the receiver, the full functionally system is a affordable DCC-System (incl. Booster)<br />
for beginners and users they like to switch to a modern digital system.<br />
The ECoSControl Radio uses radio technology to work as a wireless full function<br />
remote control unit with the ESU ECoS.<br />
The remote control unit looks like the Dynamis® but inside the enclosure it is totally<br />
different. The display has a full graphics capability and the unit can control more locos<br />
and accessories as the Dynamis®.<br />
It is possible to connect the Dynamis® system to the ECoS sniffer port und use it.<br />
Can I also use rechargeable batteries?<br />
Certainly. The ECoSControl Radio works with both (alkaline) batteries and rechargeable<br />
NiCad or NiMH batteries.<br />
With each ECoSControl Radio we will supply a kit of 4 NiMH rechargeable batteries<br />
and a charger as well.<br />
4-way joystick<br />
up / down speed control<br />
right / left selects next loco<br />
on / off function<br />
direction switch<br />
emergency stop<br />
Ordering information<br />
50111 ECoSControl Radio remote control unit + receiving module for ECoS, German & English manual<br />
50112 ECoSControl Radio single remote control unit, German & English instruction manual<br />
19