FERRARI 456 WINDOW MECHANISM REPLACMENT - Ferrari Life

More documents

Recommendations

Info

Detailed Steps: Remove the interior door panel. 9 connection points. Tools, a. 10 mm wrench, b. Phillips head screw driver, c. HEX key, that is 90 o bent or ball‐type end, d. small blunt pry device/Swiss‐Army‐knife. e. Box/Tray to keep items. f. : TAPE to prevent door lock extension adjustment screws from changing Door interior bottom/underneath, get under and remove three Phillips headed screws and washers from rug‐like area. Get on your back and look up…no pics for the obvious but this picture might help.
Under the hand rest, remove the large Phillips screw and it’s washer. Once done the arm rest leather part can be removed and set on the seat. I used a Swiss knife’s screwdriver to remove the two window switches. Carefully force up one side then the back side. Once removed, NOTE which switch wires go to which socket! Mark them LEFT and RIGHT. You will be reattaching the switch later and certainly when finishing up.
Page 1 and 2: FERRARI 456 WINDOW MECHANISM REPLAC
Page 3 and 4: QUICK STEPS: NOTES: It is not neces
Page 5: This is what a broken Pantograph lo
Page 12 and 13: Unplug the marked switch backs from
Page 14 and 15: Using a Phillips head screw driver
Page 16: The top, of the arm rest has a bent
Page 19 and 20: Take off the spring from the window
Page 21 and 22: sliders that connect the pantograph
Page 23 and 24: Take off the TOP pair of bolts Remo
Page 25 and 26: DO NOT REMOVE THE GLASS, unless tha
Page 27 and 28: Install replacement Mechanism. You
Page 29: Rear Most slider and one of the up/

FERRARI 456 WINDOW MECHANISM REPLACMENT - Ferrari Life

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?