Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Gable with Gable Tile<br />
CC<br />
For the installation of Gable Tile CC a barge board shall be<br />
fixed with the top edge to fit against the underside of the tile<br />
battens.<br />
The tile battens to be cut flush with the face of the barge<br />
board. If the tiles have to be cut to fit, allow an extra 10 – 20<br />
mm for bending up.<br />
The Gable Tile CC shall be installed one by one over the ready<br />
installed roof tiles, starting from the eaves. Each Gable Tile CC<br />
shall be fixed on the side with two nails/screws into the barge<br />
board/battens.<br />
17
Change language