You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Holders for round timber<br />
NORDIC CC<br />
1. Install the <strong>Powertekk</strong> tiles as described. At the level where<br />
the snow fence shall be installed leave one row of tiles open.<br />
2. Fix a board (width 80 – 100 mm) above the tile batten. The<br />
board shall be approx. 10 mm thinner than the the batten.<br />
Push the bracket tight against the upper part of the tile. Then<br />
fix the bracket with two screws (6,5 x 38 mm) into the already<br />
installed board.<br />
3. Close the open row of tiles.<br />
34
Change language