2800/3350 Air Cart Manual - Amity Technology
2800/3350 Air Cart Manual - Amity Technology
2800/3350 Air Cart Manual - Amity Technology
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Blower Speed Sensor<br />
An inductive sensor on the blower fan provides speed information<br />
to the ECU.<br />
Bin Level Sensor<br />
Optical bin sensors indicate when the level of product in the<br />
bin has decreased to the level of the sensor. The same sensor<br />
detects all types of products. The sensor height can be adjusted<br />
vertically to set the alarm point at any desired level.<br />
Meter Box Flow Sensor<br />
A capacitive sensor detects when the meter box is empty. This<br />
indicates if the bin is completely empty, or if the product has<br />
stopped fl owing into the meter box because of bridging or a<br />
leaky lid on the bin.<br />
Meter Shaft Speed Sensor (Ground Drive)<br />
A magnetic proximity sensor is used to detect the speed of the<br />
meter shaft. This information is used to claculate how much<br />
product has been applied and also indicate that the ground drive<br />
system is function properly.<br />
Meter Shaft Speed Sensor (Variable Rate)<br />
If the air system was pruchased with the variable rate option, an<br />
integral speed sensor is provided with the hydraulic motor. This<br />
sensor is very accurate and provides the prcise meter speed<br />
control that is needed.<br />
Ground Speed Sensor<br />
A Hall Effect sensor is used to measure ground speed by counting<br />
the teeth on a sprocket located on the rear axle or the clutch<br />
shaft.<br />
16