Corus Structural Sections - Engineering Surveyor

Structural Sections to BS4: Part 1: 1993 and BS EN10056: 1999
UK commercial offices and supplementary
information
The Corus Construction & Industrial Commercial
function is structured to be customer and market
focused.
The organisation is built around
the market sectors in which our
customers operate. A key
principle of this structure is
Account Management in which the
Account Managers provide the
lead in all business with individual
customers.
The focal point of the new
Commercial team is at
Scunthorpe, supplemented by
additional account management
teams based at our other UK
Sales Offices.
With highly motivated and trained
teams they provide current and
future customers with the highest
level of commercial support, after
sales service and information.
Main Commercial Office
Corus Construction & Industrial
PO Box 1
Brigg Road
Scunthorpe
North Lincolnshire
DN16 1BP
Telephone: 01724 404040
Fax: 01724 405600
Regional Commercial
Offices
Corus Construction & Industrial
London Business Office
1st Floor Hampton House
20 Albert Embankment
London SE1 7TJ
Telephone: 020 7975 8456
Fax: 020 7975 8408
Corus Construction & Industrial
Steel House
Redcar
Cleveland TS10 5QW
Telephone: 01642 404040
Fax: 01642 489531
Corus Construction & Industrial
The Genesis Centre
Science Park South
Garrett Field,
Birchwood
Warrington WA3 7BH
Telephone: 01925 822838
Fax: 01925 838769
Corus Construction & Industrial
PO Box 30
Motherwell
Lanarkshire ML1 1AA
Telephone: 01698 265033
Fax: 01698 230072
Supplementary Information
Availability
Corus has a comprehensive rolling
programme in which individual serial sizes
are produced more frequently than by
other manufacturers. Frequency varies
according to demand. A detailed rolling
programme is published every week. If you
would like a sample, or to be put on the
mailing list please contact the Sales
Department in Scunthorpe.
Corus is capable of rolling non-standard
weights and profiles in addition to those
already listed in this brochure. Please refer
to the relevant sales office for availability.
When enquiring or ordering, please quote
the rolling number shown. For progressing
of orders, please refer to your Account
Manager or Account Supervisor.
Angle length
Ordered bar lengths above 18 metres for
the following sizes must be referred to the
Account Manager:
EA 120 and above
UA 200 x 100 and above
Important
Amendments to, and cancellations of,
orders for all mills must be notified by
Wednesday of the week prior to rolling.
Please note that for sections where the
flange thickness exceeds 35mm, order
details are required for all qualities ten
days prior to the week of rolling.
Rolling number identification codes
M - Scunthorpe Medium Section Mill
T - Teesside Beam Mill
Teesside Beam Mill
Minimum length acceptable for any
individual bar is 6m. Corus reserve the
right to supply bars less than 9m in length
for the same order, at the same weight per
metre, in multiple lengths.
Minimum tonnage required for orders
To BS EN 10025: 1993 Grade S275JR.
Scunthorpe Medium Section Mill
5 tonnes per size, length and thickness.
Corus Construction & Industrial 43