Chemwatch MSDS Print - FUJIFILM Australia

More documents

Recommendations

Info

Fujifilm Sericol Diazo Sensitiser SZM02 <strong>Chemwatch</strong> Material Safety Data Sheet Issue Date: 9-Dec-2009 CHEMWATCH 4600-35 9317SP Version No:4 Page 5 of 7 Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION ENGINEERING CONTROLS ■ Engineering controls are used to remove a hazard or place a barrier between the worker and the hazard. Well-designed engineering controls can be highly effective in protecting workers and will typically be independent of worker interactions to provide this high level of protection. The basic types of engineering controls are: Process controls which involve changing the way a job activity or process is done to reduce the risk. Enclosure and/or isolation of emission source which keeps a selected hazard "physically" away from the worker and ventilation that strategically "adds" and "removes" air in the work environment. Section 9 - PHYSICAL AND CHEMICAL PROPERTIES APPEARANCE Coloured acidic liquid with a characteristic odour; mixes with water. PHYSICAL PROPERTIES Liquid. Mixes with water. Corrosive. Acid. State Liquid Molecular Weight Not applicable Melting Range (°C) Not available Viscosity Not available Boiling Range (°C) Not available Solubility in water (g/L) Miscible Flash Point (°C) Not applicable pH (1% solution) Not available Decomposition Temp (°C) Not available pH (as supplied)
Fujifilm Sericol Diazo Sensitiser SZM02 <strong>Chemwatch</strong> Material Safety Data Sheet Issue Date: 9-Dec-2009 CHEMWATCH 4600-35 9317SP Version No:4 Page 6 of 7 Section 11 - TOXICOLOGICAL INFORMATION INHALED ■ Not normally a hazard due to non-volatile nature of product. The vapour/mist is highly discomforting to the upper respiratory tract and may cause breathing difficulty. Inhalation of vapour is more likely at higher than normal temperatures. The material may produce respiratory tract irritation, and result in damage to the lung including reduced lung function. CHRONIC HEALTH EFFECTS ■ Principal routes of exposure are usually by skin contact/eye contact. TOXICITY AND IRRITATION ■ Not available. Refer to individual constituents. CARCINOGEN Acid mists, strong International Agency for Group 1 inorganic Research on Cancer (IARC) - Agents Reviewed by the IARC Monographs Section 12 - ECOLOGICAL INFORMATION Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. This material and its container must be disposed of as hazardous waste. Avoid release to the environment. Refer to special instructions/ safety data sheets. Ecotoxicity Ingredient Persistence: Persistence: Air Bioaccumulation Mobility Water/Soil phosphoric acid HIGH No Data LOW HIGH Available Section 13 - DISPOSAL CONSIDERATIONS • Recycle wherever possible or consult manufacturer for recycling options. • Consult State Land Waste Management Authority for disposal. • Treat and neutralise with slaked lime at an effluent treatment plant. • Recycle containers, otherwise dispose of in an authorised landfill. Section 14 - TRANSPORTATION INFORMATION Labels Required: CORROSIVE HAZCHEM: 2X (ADG7) Land Transport UNDG: Class or division: 8 Subsidiary risk: None UN No.: 2801 UN packing group: III Shipping Name:DYE, LIQUID, CORROSIVE, N.O.S. or DYE INTERMEDIATE, LIQUID, CORROSIVE, N.O.S. (contains phosphoric acid) Air Transport IATA: ICAO/IATA Class: 8 ICAO/IATA Subrisk: None UN/ID Number: 2801 Packing Group: III Special provisions: A3A803 Cargo Only continued...
Page 1 and 2: Fujifilm Sericol Dirasol 916 Chemwa
Page 9 and 10: Fujifilm Sericol Diazo Sensitiser S
Page 11: Fujifilm Sericol Diazo Sensitiser S

Chemwatch MSDS Print - FUJIFILM Australia

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?