Rexroth Hydraulics Product Catal... - Hasmak.com.tr

More documents

Recommendations

Info

Electric Drives and Controls <strong>Hydraulics</strong> Linear Motion and Assembly Technologies Pneumatics Service Extracted from RE 29024/01.05 Page 1 of 4 See Section 16 for applicable Issue: 07.05 Preferred/Spotlight part numbers and unit price. 4/2 servo solenoid valves with on-board electronics (OBE), positive overlap and position feedback Model 4WRP ..EA.. Size 6, 10 Unit series 2X Max. working pressure of P, A, B 315 bar (4600 PSI), T 250 bar (3626 PSI) – NG6 Max. working pressure of P, A, B 315 bar (4600 PSI), T 200 bar (2900 PSI) – NG10 Maximum fl ow 32 L/min (8.5 GPM) – NG6 80 L/min (21 GPM) – NG10 – Directly operated NG6 and 10 valves with positive overlap, actuated on both sides and position-controlled, symbol E – Control solenoid with on-board electronics (OBE), deadband <strong>com</strong>pensation and gain calibrated at the factory – Electrical connection 6P+PE (standard), signal input: differential amplifi er with interface A1 = +10 V – For subplate attachment, mounting hole confi guration NG6 to ISO 4401-03-02-0-94 and NG10 to ISO 4401-05-04-0-94 – Plug-in connectors to DIN 43563-AM6, see catalog section RE 08008 (order separately) – Subplates as per catalog section RE 45053 and RE 45055 (order separately) Ordering code 4WRP E E A S J – 2X / G24 K0 / A1 M * For external electronics = E Further information in plain text Size 6 Size 10 Symbols 4/2-way version A B a 0 P T A a 0 P B T = 6 = 10 Side of inductive position transducer (Standard) Nominal flow rate at 10 bar (145 PSI) valve pressure difference (5 bar (73 PSI) per metering notch) 32 L/min (8.5 GPM) – Size 6 80 L/min (21.1 GPM) – Size 10 = E = A = 32 = 80 S = J = 2X = G24 = K0 = A1 = M = NBR seals, suitable for mineral oils (HL, HLP) to DIN 51524 Interface for electronics setpoint input +10 V Electrical connection without mating connector, with unit plug to DIN 43563-AM6 2) Order mating connector separately Voltage supply of electronics +24 V DC Unit series (installation and connection dimensions unchanged) Overlap <strong>com</strong>pensating signal See curve range 0 … +0.5 Flow characteristic Progressive Proportional Valves 294 Section 7
Electric Drives and Controls <strong>Hydraulics</strong> Linear Motion and Assembly Technologies Pneumatics Service Extracted from RE 29024/01.05 Page 2 of 4 See Section 16 for applicable Issue: 07.05 Preferred/Spotlight part numbers and unit price. Technical data (Model 4WRPE 6 EA..) General Construction Spool type valve Actuation Proportional solenoid with position control, external amplifi er Connection type Subplate, mounting hole confi guration NG10 (ISO 4401-05-06-0-94) Mounting position Optional Ambient temperature range °C (°F) –20 to +50 (–4 to +122) Weight kg (lbs.) 3.0 (6.6) Vibration resistance, test condition Max. 25 g, shaken in 3 dimensions (24 h) Hydraulic (measured at n = 46 L/min (213 SUS) and t = 40 °C ± 5 °C (104 °F ± 41 °F)) Pressure fl uid Hydraulic oil to DIN 51524 ... 535, other fl uids after prior consultation Viscosity range re<strong>com</strong>mended mm 2 /s (SUS) 20 to 100 (93 to 464) max. permitted mm 2 /s (SUS) 10 to 800 (46 to 3708) Pressure fl uid temperature range °C (°F) –20 to +70 (–4 to 158) Maximum permissible degree of contamination of Class 18/16/13 1) pressure fl uid. Purity class to ISO 4406 (c) Direction of fl ow See symbol Nominal fl ow at L/min (GPM) 32 (8.5) Δp = 5 bar (72.5 PSI) per notch 2) Max. working pressure bar (PSI) Port P, A, B: 315 (4600) Max. pressure bar (PSI) Port T: 250 (3626) Operating limits See chart Leakage per metering edge (Δp = 100 bar [1450 PSI]) I m = 0 ≤ 80 cm 3 /min (5 in 3 /min) Static/Dynamic Hysteresis % ≤ 0.3 Range of inversion % ≤ 0.2 Manufacturing tolerance for Qmax. % ≤ ±3 Response time 100% signal change ms ~ 12 10% signal change ms ~ 7 Thermal drift
Page 1 and 2:
Hydraulics <strong
Page 3:
Electric Drives and Controls <stron
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Ordering code Axial piston unit Swa
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Ordering code Electric Drives and C
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Extracted from RA 90810/01.06 Page
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250: Electric Drives and Controls <stron
Page 299: Electric Drives and Controls <stron
Page 351 and 352:
Page 353 and 354:
Page 355 and 356:
Page 357 and 358:
Page 359 and 360:
Page 361 and 362:
Page 363 and 364:
Page 365 and 366:
Page 367 and 368:
Page 369 and 370:
Page 371 and 372:
Page 373 and 374:
Page 375 and 376:
Page 377 and 378:
Page 379 and 380:
Page 381 and 382:
Page 383 and 384:
Page 385 and 386:
Page 387 and 388:
Page 389 and 390:
Page 391 and 392:
Page 393 and 394:
Page 395 and 396:
Page 397 and 398:
Page 399 and 400:
Page 401 and 402:
Page 403 and 404:
Page 405 and 406:
Page 407 and 408:
Page 409 and 410:
Page 411 and 412:
Page 413 and 414:
Page 415 and 416:
Page 417 and 418:
Page 419 and 420:
Page 421 and 422:
Page 423 and 424:
Page 425 and 426:
Page 427 and 428:
Page 429 and 430:
Page 431 and 432:
Page 433 and 434:
Page 435 and 436:
Page 437 and 438:
Page 439 and 440:
Page 441 and 442:
Page 443 and 444:
Page 445 and 446:
Page 447 and 448:
Page 449 and 450:
Page 451 and 452:
Page 453 and 454:
Page 455 and 456:
Page 457 and 458:
Page 459 and 460:
Page 461 and 462:
Page 463 and 464:
Page 465 and 466:
Page 467 and 468:
Page 469 and 470:
Page 471 and 472:
Page 473 and 474:
Page 475 and 476:
Page 477 and 478:
Page 479 and 480:
Page 481 and 482:
Page 483 and 484:
Page 485 and 486:
Page 487 and 488:
Page 489 and 490:
Page 491 and 492:
Page 493 and 494:
Page 495 and 496:
Page 497 and 498:
Page 499 and 500:
Page 501 and 502:
Page 503 and 504:
Page 505 and 506:
Page 507 and 508:
Page 509 and 510:
Page 511 and 512:
Page 513 and 514:
Page 515 and 516:
Page 517 and 518:
Page 519 and 520:
Page 521 and 522:
Page 523 and 524:
Page 525 and 526:
Page 527 and 528:
Page 529 and 530:
Page 531 and 532:
Page 533 and 534:
Page 535 and 536:
Page 537 and 538:
Page 539 and 540:
Page 541 and 542:
Page 543 and 544:
Page 545 and 546:
Page 547 and 548:
Page 549 and 550:
Page 551 and 552:
Page 553 and 554:
Page 555 and 556:
Page 557 and 558:
Page 559 and 560:
Page 561 and 562:
Page 563 and 564:
Page 565 and 566:
Page 567 and 568:
Page 569 and 570:
Page 571 and 572:
Page 573 and 574:
Page 575 and 576:
Page 577 and 578:
Page 579 and 580:
Page 581 and 582:
Page 583 and 584:
Page 585 and 586:
Page 587 and 588:
Page 589 and 590:
Page 591 and 592:
Page 593 and 594:
Page 595 and 596:
Page 597 and 598:
Page 599 and 600:
Page 601 and 602:
Page 603 and 604:
Page 605 and 606:
Page 607 and 608:
Page 609 and 610:
Page 611 and 612:
Page 613 and 614:
Page 615 and 616:
Page 617 and 618:
Page 619 and 620:
Page 621 and 622:
Page 623 and 624:
Page 625 and 626:
Page 628:
Bosch Rexroth Corp
show all

Rexroth Hydraulics Product Catal... - Hasmak.com.tr

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?