Rexroth Hydraulics Product Catal... - Hasmak.com.tr

Ordering code
Axial piston unit
Swash plate design, variable,
nom. press. 4000 psi (280 bar)
peak press. 5100 psi (350 bar)
Operating mode
Motor
Size
A10V
Motor displacement V g max in 3 / rev. 1.71 2.75 3.78
28 45 63
cm 3 / rev. 28 45 62
Control devices
Two-point direct control, external
control supply, without pilot valve DG ● ● DG
A10V M / 5 2 W - V
M
Two-point control, hydraulically
operated
Two-point control
,electrically 12V
Control voltage
operated, with Control voltage
solenoid valve 24V
with stroking time orifi ce
Series
HZ ● ● ● HZ
HZ 6 ● ● ● HZ6
EZ 1 ● ● ● EZ1
EZ 6 ● ● ● EZ6
EZ 2 ● ● ● EZ2
EZ 7 ● ● ● EZ7
5
Design index
2
Direction of rotation
bi-directional
W
Min. displacement 28 45 63
V g min in 3 (cm 3 ) infi nitely variable
from
to
0.49 (8) 0.73 (12) 0.98 (16)
1.71 (28) 1.52 (25) 2.32 (38)
from – 1.59 (26) 2.44 (40)
Adjustment, please state in clear text
to – 2.75 (45) 3.78 (62)
1
2
Seal
FKM fl uororubber (DIN ISO 1629)
V
Shaft end
SAE splined (for details see unit dimensions) ● ● ● R
SAE splined (for details see unit dimensions) – ● ● W
Mounting flange
SAE 2-hole ● ● ● C
Ports for service lines
A/B at side-same side; SAE fl ange,UNC fi xing screws ● ● ● 60N00
A/B at side-same side; UNF threaded ports ● ● ● 66N00
A/B at rear, SAE fl ange; UNC fi xing screws – ● – 61N00
A/B at rear, UNF threaded ports – ● – 64N00
Valves
without valves ● ● ● 0
integrated fl ushing valve, only with side ports (60N00, 66N00) ● ● ● 7
Speed pickup
without speed pickup (no code) ● ● ● -
prepared for speed pickup(IDR 18/20-L250) ● ● ● D
– = not available = in preparation ● = available
Pumps and Motors 66 Section 1