DensiEye Reference Manual - X-Rite

X-Rite DensiEye 100 and 700
4.4. Gray Balance
• Reference values are referenced to paper white or absolute white base
• Measured reference values appear in a table with solid density reference and
tolerance values for cyan, magenta, yellow and black
• You can edit or measure these reference values and edit the tolerance values
for each color in this table
4.4.1. Measure Gray Balance reference values (Paper)
• Set White Base to Paper or Paper Auto in the Function Settings
• Make sure that the instrument is calibrated for paper white base
• Select Paper and measure paper white
• After the measurement, the message box briefly displays “White Measurement
done”
• Select Gray Balance
o The output area displays a table with gray balance density reference and
tolerance values for cyan, magenta, yellow and black
o Measure gray balance reference values
• The output area displays measured gray balance density reference
values
• Select Return to return to the main menu
28 DensiEye Reference Manual 4