DensiEye Reference Manual - X-Rite

X-Rite DensiEye 100 and 700
4.4.2. Edit Gray Balance reference and tolerance values (Paper)
• Set White Base to Paper or Paper Auto in the menu Function Settings
• Make sure that the instrument is calibrated for paper white base
• Select Gray Balance
o Highlight gray balance reference and tolerance values for cyan
o Press the Enter button to open the edit screen
• Edit or measure gray balance density reference value
• Edit gray balance density tolerance value
• The output area displays the measured or edited gray balance
density reference values and the edited gray balance density
tolerance values
• Continue editing the other colors as described
• Select Return to return to the main menu
4.4.3. Measure Gray Balance reference values (Absolute)
• Set White Base to Absolute or Absolute Auto in the menu Function Settings
• Make sure that the instrument is calibrated for absolute white base
• Select Paper and measure paper white
• After the measurement, the message box briefly displays “White Measurement
done”
• Select Gray Balance
o The output area displays a table with gray balance density reference and
tolerance values for cyan, magenta, yellow and black
o Measure gray balance reference values
• The output area displays measured gray balance density reference
values
• Select Return to return to the main menu
DensiEye Reference Manual 4 29