2012 - PageSuite

Fluid Handling
Fluid recycling
solution
The mobile
SumpDoc by Eriez
provides complete,
inline fluid recycling
for machine tools
operating in three
simple steps. The
operator selects
each mode starting
with Sump Vac
mode, moving to
Filtration Mode
and then to Coolant
Makeup Mode.
When the sump tank
reaches the desired concentration level, the process is
complete. The SumpDoc is completely portable, allowing
operators to drop in the hoses, complete a full cycle, and
move on to the next machine tool sump or parts washer
to be cleaned.
Eriez
www.eriez.com
Siphon fed
spray nozzles
EXAIR’s Atomizing
Spray Nozzles atomize
fluids in a range
of spray patterns by
combining liquid and
compressed air to
create a mist of atomized
liquid that can be
easily adjusted to various
applications. The
siphon fed nozzles
require no liquid pressure
and can be used
with gravity fed liquids
or lift liquids from a
siphon height as much
as 36 in. Siphon fed nozzles can be used on liquids with
a viscosity up to 200 cp. The nozzles are fully adjustable
with a stainless steel construction for durability and corrosion
resistance.
EXAIR Corporation
www.exair.com
Inline vortex
flowmeter
The VLM10 combines
an inline vortex meter,
a built-in flow computer,
and an integral temperature
sensor giving
users an elegant all-inone
solution for their
metering needs. The
VLM10 is precise and
reliable with a steam or
gas mass flow accuracy
of ± 1.5% over a wide
20:1 flow range. The
fully welded, no-gasket
design ensures safe
measurement of steam
and allows the sensors
and RTD to be removed without having to shut down the line
first. The built-in Web server allows customers to monitor
flow and monitor meter health through the Internet.
Spirax-Sarco Inc.
www.spiraxsarco.com
Threaded port
connectors
FasMate FN Series
connectors allow for
quick, easy connections
to threaded
ports, delivering
results in many applications.
The connectors
feature easy
actuation and a split
collet design. The
versatile connectors
have the capacity to
perform three styles of actuation: squeeze level, pneumatic
pilot, and pneumatic thumb valve. The new series offers
additional features and benefits for better performance
and durability. The FasMate FN Series provides increased
application compatibility through the connectors that offer
an extensive threaded port sealing range of 1/8 in. to 1/2 in.
NPT. The connectors are equipped with pressure-assisted
sealing technology to eliminate the risk of separation.
FastEST Inc.
www.fastest-inc.com
www.plantengineering.com plant engineering November 2012 • 43