User manual - Bellman & Symfon

More documents

Recommendations

Info

Pairing of units The Transmitter and Receiver Units in the <strong>Bellman</strong> Audio Domino system must have the radio link established in order for radio communication to operate. To make it easier to get started, a Receiver Unit and a Transmitter Unit which are paired together are always supplied so that they will work together. Where you want to pair a Receiver Unit with a Transmitter Unit which is different from the Receiver Unit it was originally supplied with, you can do this in the Settings Menu. Proceed as follows to pair up the units: 5 s 5 s • Start both the units with the On/Off buttons i (6, 18). • Go into the Settings Menu. • Hold down the CONNECT button (19) on the Transmitter Unit. • Hold down both the M button (5) and the R button (7) on the Receiver Unit. APP A ”running light” on the Receiver Unit’s Volume and Tone LED Indicator (8) moving towards the centre indicates that the link has been established. 321
322 Please note! If you pair up a Transmitter Unit and a Receiver Unit in the Settings Menu, this replaces the pairing carried out in the factory. This can be useful when changing a Transmitter Unit under guarantee or if you want to pair up several Receiver Units to a Transmitter Unit (e.g. in a conference room).
Page 1: BELLMAN AUDIO DOMINO DE DK EN ES FI
Page 8 and 9: Bellman Audio Domino Personal Heari
Page 10 and 11: 13 Headphone output 3.5 mm jack plu
Page 12 and 13: the volume while the Volume and Ton
Page 14 and 15: How to use Bellman Audio Domino The
Page 16 and 17: Charging Both the Transmitter and R
Page 18 and 19: Selecting the tone Use the tone con
Page 20 and 21: OFF 1 s OFF 1 s Switching off When
Page 22 and 23: External sound source If the audio
Page 24 and 25: The sound from the Transmitter Unit
Page 26 and 27: Proceed as follows to establish a t
Page 28 and 29: Problem A high-pitched noise is hea
Page 30 and 31: Warning! For the safety of your chi
Page 32 and 33: Overview of the Settings Menu In th
Page 34 and 35: MAX Use the < button (11) to reduce
Page 36 and 37: Adjusting the Tone Control The Tone
Page 40 and 41: Testing It is easy to test the Bell
Page 42 and 43: Charging • Connect the charger to
Page 44 and 45: Problem Solution The Receiver Unit
Page 46 and 47: Radio communication Frequency Range
Page 48: ear phones headphones STETOCLIPS Ne

User manual - Bellman & Symfon

Create successful ePaper yourself

Delete template?

Save as template?