to download the Eurotherm piccolo⢠Manual in PDF format
to download the Eurotherm piccolo⢠Manual in PDF format
to download the Eurotherm piccolo⢠Manual in PDF format
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
User <strong>Manual</strong><br />
Piccolo Range<br />
4.6 O<strong>the</strong>r Levels of Operation<br />
There are 4 levels of operation:-<br />
Lev1 - Level 1 has no pass code and is a subset of Level 2 parameters.<br />
Lev2 - Level 2 displays a full set of opera<strong>to</strong>r parameter as mnemonics.<br />
ConF - Configuration level sets all features of <strong>the</strong> controller. See section 5.2.<br />
Level 2 and Configuration level can be protected by pass codes.<br />
4.7 Level 2 Operation<br />
Parameters available <strong>in</strong> level 1 are also available <strong>in</strong> level 2, but level 2 <strong>in</strong>cludes additional parameters for<br />
commission<strong>in</strong>g purposes and for more detailed operation.<br />
The additional parameters are listed and expla<strong>in</strong>ed <strong>in</strong> <strong>the</strong> follow<strong>in</strong>g sections.<br />
4.7.1 To Select Level 2<br />
Operation Action Indication Notes<br />
Select Level 2 1. Press and hold until Go<strong>to</strong><br />
is shown.<br />
2. Press <strong>to</strong> choose Lev 2<br />
(Level 2).<br />
3. Press <strong>to</strong> enter.<br />
Choices are:-<br />
Lev1<br />
LEv2<br />
ConF<br />
Enter <strong>the</strong> pass<br />
code (if<br />
configured)<br />
4. Press or <strong>to</strong> enter <strong>the</strong><br />
correct pass code<br />
5. Press <strong>to</strong> accept <strong>the</strong> value<br />
6. The controller is now<br />
operat<strong>in</strong>g <strong>in</strong> Level 2<br />
The default pass code for level 2 is<br />
‘2’.<br />
A special case exists if a security<br />
code has been configured as ‘0’. If<br />
this has been done it is not<br />
necessary <strong>to</strong> enter a code and <strong>the</strong><br />
controller will enter <strong>the</strong> chosen level<br />
immediately.<br />
32 Part No HA031260 Issue 1 May -12