Introduction - Tag

Introduction
The most recognised, most respected 4x4 in the world
PAGES
2-3
Off-road, on-road
Legendary off-road, smooth on-road
PAGES
4-7
Engine and chassis
A modern engine to complement the tried and trusted chassis
PAGES
8-11
Towing, carrying and payload
The ultimate versatile workhorse
PAGES
12-15
Professional users
Serious about work, serious about exploration
PAGES
16-19
Interior
Comfort and practicality
PAGES
20-23
Specification and choices
Body styles, colours, dimensions and trim
PAGES
24-27
Technical data
Engines, technical data, capabilities, weights and professional vehicles
PAGES
28-35
Accessories
Add even more capability, individuality and style. Make it yours
PAGES
36-45
Our Planet
Our plan for a sustainable future
PAGES
46-47

Series I (1948-1953) Series I Station Wagon (1954-1958)
’48
1954 Long-wheelbase 107 inches available. 1957 First diesel engine introduced.
Series IIa Station Wagon (1961-1972)
1966 Electrical indicators become standard. 1968 Headlamps moved from radiator grille to wings.
‘90’ Station Wagon (1984-1990)
1984 Leaf springs upgraded to coil springs. One-piece windscreen introduced. Wind-up front windows
replace sliding windows. Polyurethane wheel arches introduced to accommodate wider track.

Series I I Station Wagon (1958-1961)
1958 Side windows enlarged. Sills introduced to obscure exhaust and powertrain.
Fuel filler cap moved from under driver’s seat to behind driver’s door (RHD).
Founded on a lineage stretching back to
the debut of the first Land Rover in 1948,
today’s Defender takes pride of place as
the toughest vehicle in the Land Rover
range. The original Land Rover won instant
recognition for its tough versatility and
off-road ability, attributes that equally
apply almost two million vehicles later.
Six decades of experience in designing and building the world’s most
distinctive four-wheel drive vehicles reach their pinnacle in the latest
Defender. The introduction in 2007 of the distinctive power bulge in
the bonnet denoted an all-new powertrain with greater pulling power.
Also introduced in 2007 were a new facia housing effective heating and
air conditioning, supportive seats and hard-wearing interior surfaces.
They all make this robust off-road legend perfectly equipped to conquer
the challenges of the modern world. Defender means business like
never before. And now with its state-of-the-art engineering, a new
2.2 litre Diesel engine has been introduced. It delivers all the incredible
power and torque for which Defender is renowned - plus a historic top
speed of 145kph. Defender’s iconic style, massive ability and unparalleled
versatility have been perfected over generations and make it the
incredible sturdy off-road vehicle and tough heavy workhorse it is today.
Series I I I Station Wagon (1972-1984)
1972 Air intake on wing for heater added. 1981 Improved seating introduced on County models.
Defender (1990-2006)
1998 Td5 engine introduced. Fuel tank and filler repositioned to rear.
Bonnet stowage of wheel outlawed.
Defender (2007-Present)
2007 2.4 litre Diesel engine, six-speed manual transmission and new interior introduced.
2011 2.2 litre Diesel engine introduced, raising top speed to 145kph. 3

When it comes to taking on, and beating, some of the toughest off-road terrain,
nothing comes close to Defender.
That’s because, unlike many of its competitors, Defender has permanent four-wheel drive with the centre differential distributing
torque evenly between front and rear axles to give optimum all-weather performance on and off-road. What’s more, the central
differential can be locked to help minimise wheel spin and maximise traction on slippery surfaces. And for even more grip and
control off-road (not to mention on-road as well) Defender is available with an optional ABS system featuring traction control.
Whatever the conditions, Defender just gets to work without a fuss.

6
Excellent axle articulation, thanks to independent coil spring
suspension, also plays its part in Defender’s legendary ability
by helping the wheels to maintain contact with the ground and
follow the contours of rough surfaces. Defender is a business
partner that rarely puts a foot wrong.

The legendary Land Rover command driving position, now a central feature of
every Land Rover vehicle, was first established by Defender’s predecessor in
1948. The command driving position gives greater visibility of the way ahead
and the surrounding environment, adding to the driver’s control and security.
The driving experience is further enhanced by Defender’s six-speed manual transmission. Specially developed for heavy-duty
applications, it is light, strong and also provides smooth on-road performance and slick gear changes.
With 12 forward gears, whether towing, on-road or in rough terrain, you’re always in command. A low first gear reduces
crawl speed and combines with the excellent engine torque to make towing almost effortless.

TOR

QUE
*Please see your Land Rover Dealer for further details.
Superb towing power. And the power to help keep you out of trouble.
Defender’s new 2.2 litre Diesel engine produces an impressive 360Nm
of torque. With 90 percent of peak power constantly on tap from as
low as 2,200rpm to over 4,350rpm it provides maximum muscle for
tough working environments.
With the introduction of Land Rover’s new Diesel Particulate Filter, not only is the new Defender engine fully compliant
with the latest N1 EU5 emissions legislation, it now delivers a historic new top speed of 145kph. In keeping with the vehicle’s
iconic status as a truly global product, a unique engine tune has been developed which allows it to tolerate the variable quality,
high-sulphur fuels to be found across developing markets*. To cope with the sort of difficult progress that many operations
demand, when the engine is working hard at low speed, say 1,000rpm, Land Rover’s innovative Anti-Stall device intelligently
adjusts the fuel required to help keep everything running smoothly.
9

STRENGTH
There are some things that’ll never need improving. The chassis is one
of them. Immensely strong, it is probably the single most important
component in Defender’s design architecture and contributes to the
vehicle’s strength, versatility, durability and capability. The box section,
ladder frame design is far stronger than an open channel design and more
adaptable than the unibody design favoured by many of its competitors.
And there’s the body. It’s tough, with a no-nonsense, functional simplicity and a slab-sided profile that makes it all the
more adaptable and enhances configurability. Bolt on accessories such as chequer plates, ladders and expedition roof
racks are easily attached. The lightweight aluminium body* not only improves fuel consumption, it also increases payload,
the vehicle’s capability, and gives an optimum trade-off between form and function. Indeed, the corrosion-resistant
aluminium body panels have evolved directly from those on the original 1948 Land Rover. Even the cargo bed is made
of aluminium. So even the cargo bed won’t rust. You can depend on your Defender.
*Doors and Bonnets are made from corrosion resistant steel.
10

It all comes together with Defender’s all-round capability.
Exceptional towing capability, with a braked trailer of 3,500kg and an impressive load carrying capability derived from
the 3,500kg* gross vehicle weight (GVW). With a strong, rigid chassis specifically designed to handle heavy, awkward loads,
Defender can tow more and carry more across more extreme terrain. Defender is the master of multi-tasking.
*Available with 110 and 130 derivatives.
13

Defender’s design architecture lends itself perfectly to
versatility. It is available in nine core bodystyles (including
Station Wagon, Hard Top, Pick Up and Double Cab Pick Up)
and a further five bodystyles covering Soft Tops and Chassis
Cabs with three different wheelbases (90, 110 and 130).
Hazardous materials, for instance, can be kept separate from passengers and transported to
the remotest locations in the Defender 110 Double Cab Pick Up. Even greater personalisation
can be achieved with the range of Land Rover Accessories available from your Land Rover Dealer.
Specialist variations (Professional Vehicles) of Defender remain available through Land Rover
Direct Sales in bespoke specifications.
Vehicle shown includes accessories.
15

Defender is the tough, reliable mobility platform
for countless emergency and rescue services as well
as for a huge number of industries including power
generation, quarrying, agriculture, oil exploration,
forestry and civil engineering.
PROFESSIONAL
17

When there’s a job to be done you’ll be grateful you
chose Defender.
Defender is more than an expedition vehicle. It is also the first choice for professionals.
With its extraordinary all-round capability and its ability to accommodate specialist
equipment, such as Land RoverÕs heavy-duty winch, Defender is the definitive vehicle
for a range of essential services including rescue and humanitarian aid. WhatÕs more,
to take full advantage of DefenderÕs unique talents and versatility, world-class,
hands-on training is available for both individuals and organisations through the
Land Rover Experience Centre network.
With its vast load capacity, Defender is equally versatile whether shifting payloads
or accommodating up to seven adults in comfort with its exceptionally flexible array
of seating combinations. At the end of the shift, the flat floor areas can be swept
clean in seconds and the detachable water-resistant mats allow mud and debris to
be simply hosed away. Of course, Land RoverÕs range of interior and exterior equipment
and accessories allows you to personalise and match Defender with your businessÕ
exact requirements and preferences.
18
To make the most of DefenderÕs capabilities we recommend Land Rover Experience specialist training. Available across the global
network of Land Rover Experience centres, these courses provide authoritative factory-approved Defender tuition. For more
information about Land Rover Experience in your country, visit www.landrover.com/Experience

forward-facing seats can carry seven adults in comfort. a tHird row of seats is an oPtional eXtra.
TRIM COMBINATIONS
vinyl
seat face: twill vinyl
seat back & side: grey stag vinyl
clotH
seat face: Black mondus
& span cloth
Part leatHer
seat face: Black leather
& rack 3 cloth
20

Form follows function in the Defender interior.
Tough working vehicles demand robust materials
such as the scuff-resistant facia and durable
seat coverings. The facia is a one-piece moulding
for improved refinement, its distinctive lines
providing Land Rover’s traditional commanding
view of the ground ahead.
Instruments are clearly visible while controls and switches are easily reached.
The seats are arranged stadium style, their position maximising exterior vision
and easing access. Designed to be comfortable and supportive whatever the
task or terrain, each seat has a three-point safety harness, but can be folded
to optimise the Defender’s load-carrying versatility. There’s space for smaller
items too, in trays on the facia or between the front seats. The optional cubby
box provides extra storage and includes two cup holders.
21

Inspired by 21st century industrial design,
the Defender facia is simple, robust and practical.
The instrument cluster is dominated by the
rev counter and speedometer dials and a third
instrument enclosing water temperature and
fuel level gauges.
A cluster of warning lights monitors vehicle systems. For the passenger
there’s a massive grab handle, reinforcing the sense of security that comes
from travelling in a Defender. Easily reached by both driver and passenger,
the controls for the heating and optional air conditioning system keep the
cabin comfortable with air pumping out through the distinctive top-mounted
vents as well as into the foot wells. To keep in touch, or simply to enjoy the
ride, the entertainment system includes options of high-mounted tweeters,
radio, CD player or MP3 player connectivity.
22

BODY STYLES & COLOurS
Two striking new colours, Indus Silver and Orkney Grey are available on the latest Defender.
Land Rover’s paintshop at Solihull uses the very latest in paint technology to provide the most
durable coatings while minimising the use of any toxic solvents. Every Land Rover spends twelve
hours in the paintshop passing through over twenty processes that ensure a superbly polished
and supremely protective hardened finish - designed for the very toughest working environments
that Defender excels in. Beyond Defender’s traditional solid colour palette (Fuji White, Tamar
Blue and Keswick Green) a wide range of vibrant metallic finishes are also offered. Please check
availability with your Land Rover Dealer.
Visit www.landrover.com for more information.
DEFEnDER 110 uTILITy WaGOn InDuS SILVER
DEFEnDER 90 STaTIOn WaGOn InDuS SILVER
DEFEnDER 110 STaTIOn WaGOn TaMaR BLuE
DEFEnDER 110 DOuBLE caB PIcK uP KESWIcK GREEn
DEFEnDER 90 HaRD TOP InDuS SILVER
DEFEnDER 110 HaRD TOP GaLWay GREEn*
DEFEnDER 110 HIGH caPacITy PIcK uP SuMaTRa BLacK**
DEFEnDER 90 PIcK uP ORKnEy GREy
DEFEnDER 110 PIcK uP FIREnZE RED
DEFEnDER 130 DOuBLE caB HIGH caPacITy PIcK uP FuJI WHITE
Baltic Blue available early 2012.
*aintree Green replaces Galway Green early 2012. **Santorini Black replaces Sumatra Black early 2012.
Vehicles shown are a combination of trim levels and optional items, check with your Land Rover Dealer for details.

dimensions
90 110
130
Pick Up Hard Top soft Top station Wagon Pick Up
High Capacity
Pick Up
Hard Top
station Wagon/
Utility Wagon
double Cab
Pick up
double Cab HCPU
Track front/rear 1,486 (58.5) † 1,486 (58.5) † 1,486 (58.5) † 1,486 (58.5) † 1,486 (58.5) † 1,486 (58.5) † 1,486 (58.5) † 1,486 (58.5) † 1,486 (58.5) † 1,511 (59.5)
Cargo bed length 983* (38.7) 1,144 (45.0) 1,144 (45.0) 1,144 (45.0) 1,740* (68.5) 2,010 (79.2) 1,900 (74.8) 1,900 (74.8) 1,020 (40.8) 1,668* (65.7)
Tailgate aperture width 878 (34.5) 878 (34.5) 878 (34.5) 878 (34.5) 878 (34.5) 1,362 (53.6) 878 (34.5) 878 (34.5) 878 (34.5) 1,362 (53.6)
Largest box length 830 (32.6) 1,030 (40.6) 1,030 (40.6) 1,005 (40) 1,570 (61.8) 1,980 (78) 1,750 (68.9)
1,100/1,470**
(43.5/57.9)** 690 (27.2) 1,640 (64.6)
Largest box width 800 (31.5) 755 (29.7) 755 (29.7) 660 (26) 800 (31.5) 1,060 (41.7) 755 (29.7) 660 (26) 800 (31.5) 1,060 (41.7)
Largest box height 1,160 (45.7) 1,050 (41.3) 1,050 (41.3) 1,050 (41.3) 1,160 (45.7) 1,160 (45.7) 1,050 (41.3) 1,050 (41.3) 1,160 (45.7) 1,160 (45.7)
Dimensions mm (inches) *Add 161mm if spare wheel removed **2nd row seats up/2nd row seats folded † Due to greater wheel offset 1,511 (59.5) when HD Steel Wheel and Gloss Black Saw Tooth Alloy Wheel is fitted
Width
1,790mm (70)
90
Overall Length
Station Wagon/Hard Top 3,894mm (153)
Pick Up 3,649mm (144)
130
Overall Length
Double Cab HCPU 5,170mm (204)
Height
2,021mm-
2,182mm
(80-82)
Track width
1,486mm (58.5)
130 DC/HCPU
1,511mm (59.5)
Vehicle height depends on tyre and suspension options
110
Overall Length
Station Wagon/Utility Wagon/Hard Top 4,785mm (183)
Pick Up 4,370mm (172)
Wheelbase 2,360mm (93)
110
Overall Length
Double Cab 4,438mm (174.7)
Wheelbase 3,225mm (127)
110
Overall Length
HCPU 4,631mm (182.3)
Wheelbase 2,794mm (110) Wheelbase 2,794mm (110)
Wheelbase 2,794mm (110)
25

oDY stYLe aPPLications
cHoosing tHe rigHt boDY stYLe
Defender is available in a wide variety of body styles and three wheelbases.
All of which give optimum capability to a range of potential uses. Choosing
the appropriate body type for your requirements will help you get the most
from your Defender.
90
station Wagon
90
HarD toP
90
soFt toP
90
PicK UP
110
station Wagon
110
UtiLitY Wagon
DesirabLe cHaracteristics
toWing - short distance (eg agriculture)
Manoeuvrability, good rear visibility
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
toWing - long distance (eg exhibition units)
Directional stability, fuel range
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
carrYing eQUiPment (heavy, valuable, vulnerable)
Loadspace, payload, security, protection from the elements
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
carrYing materiaLs (loose, dirty, smelly, livestock)
Loadspace, payload, access, cab separation
5 5 5 5 5 5 5 5 5 5
carrYing PeoPLe
Seating capacity, comfort, access
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
eXtreme oFF-roaD
Manoeuvrability, all round visibility, good clearance angles
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
KeY: 5 5 5 5 5 - most desirable
5 - least desirable
seating combinations 90 Ht/st/PU † 2 seats 90 sW † 4 seats
Ht = Hard Top st = Soft Top PU = Pick Up HcPU = High Capacity Pick Up DcPU = Double Cab Pick Up
sW = Station Wagon UW = Utility Wagon DcHcPU = Double Cab High Capacity Pick Up
*60:40 split folding middle bench seat (Station Wagon and Utility Wagon only).
† Optional Cubby Box shown.
Rear cabin line applicable to PU only

110
HARD TOP
110
SOFT TOP
110
CHASSIS CAB
110
PICK UP
110
HIGH CAPACITY
PICK UP
110
DOUBLE CAB
PICK UP
130
DOUBLE CAB
HIGH CAPACITY
PICK UP
130
CHASSIS CAB
130
DOUBLE CAB
CHASSIS
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
110 HT/ST/PU/HCPU 2 seats 110 SW/UW/DCPU 5 seats*
110 SW 7 seats* (optional extra)
130 DCHCPU 5 seats
Rear cabin line applicable to PU only
Rear cabin line applicable to DCPU only
Third row rear seats optional
27

engine & trAnsMissiOn
2.2 litre diesel
Fuel tAnk CApACity 90 90 90 sW 110 130
Litres 60 60 60 75 75
Torque (Nm)
380
360
340
320
300
280
260
240
220
200
80
1,000
1,500
2,000
2.2 Diesel
2,500
Engine speed (rpm)
Torque (Nm) Power (kW)
Max torque (Nm)
360Nm/2,000rpm
3,000
3,500
4,000
Max power (kW)
90kW/3,500rpm
100
90
80
70
60
50
40
30
20
10
0
Power (kW)
Permanent four-wheel drive 5
Dual-range transmission 5
Locking centre differential 5
Six-speed manual transmission 5
5 = Standard equipment
Fuel eCOnOMy (L/100KM)
Urban 11.5 11.5 11.7 13.6 13.6
Extra urban 9.0 9.1 9.4 9.7 9.7
Combined 10.0 10.0 10.2 11.1 11.1
Drive by noise 75dB (A) 75dB (A) 75dB (A) 75dB (A) 75dB (A)
CO 2 g/km 266 266 269 295 295
Certifiable emissions EU2/EU4 EU5 EU5 EU2/EU4/EU5 EU2/EU4/EU5
The results given here do not express or imply any guarantee of the fuel consumption of any particular vehicle with
which this information may be supplied. Vehicles are not individually tested, and there are inevitably differences between
individual vehicles of the same model. In addition, the vehicle may incorporate particular modifications. Furthermore, the
driver’s style and road traffic conditions, as well as the extent to which the vehicle has been driven and the standard of
maintenance will all affect its fuel consumption.

wheels & tyres
Choosing the right tyre
Since no tyre is perfect for all driving conditions Land Rover offers a range to suit a wide variety of surfaces. Selecting the
correct tyre for the conditions that you are most likely to experience will help enable you to get the best from your Defender.
STANDARD STeeL WHeeL 90/110
5.5F x 16
HeAvy DuTy STeeL WHeeL 90/110/130
6.5J x 16
BOOST ALLOy 90/110
7J x 16
DuAL FINISH ALLOy 90/110
7J x 16
GLOSS BLAck SAW TOOTH ALLOy*
90/110 7J x 16
tyre wheel tyre siZe 90 110 130
ON-ROAD
10
9
MiChelin lAtitUDe Cross (tUBeless) Std Steel 7.50R16 5 5 –
8
7
MiChelin XZl (tUBeD AnD tUBeless) Std Steel 7.50R16 9 9 –
NOISE
6
5
4
3
2
1
0
MUD
MiChelin XZl (tUBeD AnD tUBeless) HD Steel 7.50R16 – – 9
gooDyeAr wrAngler Mt/r (tUBeless) HD Steel 235/85R16 9 9 9
ContinentAl ContiCross ContACt At HD Steel 235/85R16 – – 5
GRASS
SNOW
ContinentAl ContiCross ContACt At Alloy 235/85R16 9 9 –
gooDyeAr wrAngler Mt/r (tUBeless) Alloy 235/85R16 9 9 –
SAND AND ROCKS
5 Standard 9 Option – Not applicable HD Heavy Duty
Distance from centre indicates level of performance
1 = Good 10 = Superior
*Only available with MTR tyre. For introductory timing and availability please see your local Land Rover Dealer.
PleAse note: When choosing vehicles fitted with specific wheel and tyre combinations or optional wheels and tyres, your intended use of the vehicle should be considered.
Alloy wheels may be more vulnerable to damage in some off-road conditions, please discuss your requirements with your Land Rover Dealer when selecting your vehicle and specification.
29

capabilities
appRoacH/DepaRtURe aNgles
MaxiMUM gRaDieNt
Departure angle
Ramp angle
Approach angle
Maximum gradient
WeigHts kg
staNDaRD
pick Up Hard top soft top station
Wagon
pick Up
High capacity
pick Up
Hard top soft top station Wagon
5 seat/7 seat
Utility
Wagon
Double cab
pick Up
chassis cab
Double cab
HcpU
chassis cab
Gross vehicle 2,505 2,505 2,505 2,505 3,050 3,050 3,050 3,050 3,050/3,050 3,050 3,050 3,050 – – –
Minimum kerb weight* 1,740 1,771 1,756 1,887 1,917 1,938 1,955 1,860 2,062/2,123 2,062 2,042 1,787 – – –
Maximum payload** 765 734 749 618 1,133 1,112 1,095 1,190 988/927 988 1,008 1,263 – – –
HeaVY DUtY
90 110
130
Gross vehicle 2,550 2,550 2,550 2,550 3,500 3,500 3,500 3,500 3,500/3,500 3,500 3,500 3,500 3,500 3,500 3,500
Minimum kerb weight* 1,746 1,777 1,762 1,893 1,975 1,996 2,013 1,918 2,120/2,181 2,120 2,100 1,845 2,149 1,858 2,024
Maximum payload** 804 773 788 657 1,525 1,504 1,487 1,582 1,380/1,319 1,380 1,400 1,655 1,351 1,642 1,476
*Minimum kerb weight = Unladen weight + full tank & 75kg driver **Maximum payload = GVW - Kerb weight – Not applicable
Double cab
chassis

MiniMuM turning Wading depth Obstacle clearance
Minimum
turning diameter
gradients at kerb Weight
turning circle Kerb to Kerb metres (feet)
grOund clearance mm (inches)
90 110 130 90 110
130
90 110 130
Maximum gradient 45º 45º 45º
Approach angle 47º 49º 49º
Departure angle 47º 35º 35º
Ramp break 147º 150º 153º
Tyre size 7.50R16 235/85R16 7.50R16 235/85R16 7.50R16
Minimum turning
diameter
12.3 (40.4) 13.34 (43.8) 12.8 (42.0) 14.36 (47.2) 15.08 (49.4)
brakes
Servo assisted front and rear disc brakes on all models.
steering
All models have power assisted steering. Worm and roller.
Tyre size 235/85R16 235/85R16 7.50R16
Axle ground clearance 250 (9.8) 250 (9.8) 250 (9.8)
Minimum underbody ground clearance, unladen 323 (12.72) 314 (12.36) 314 (12.36)
Wading depth mm (inches)
Wading depth 500 (20) 500 (20) 500 (20)
31

vehicle loading
Incorrect vehicle and trailer loading can give excessive tyre, brake and spring wear,
overloaded axles, poor vehicle handling and braking performance and a generally
unstable and inefficient vehicle.
The following factors should be taken into consideration when choosing your
vehicle and the equipment you specify.
PaYload & WeighT diSTRiBUTion
A correct weight distribution is achieved by considering several simple points:
• Payload is calculated by GVW-EEC kerb weight and must not be exceeded
• This payload should be distributed as evenly as possible along the vehicle’s
loadbed length
• The height of the payload should be kept to a minimum to keep the centre
of gravity as low as possible
• Additional effects of a trailer should be taken into consideration
(see towing section below).
Please refer to the table opposite and the dimensions section to assess the
most appropriate vehicle configuration for the loads you are likely to carry.
For example, if you typically carry relatively compact but heavy loads on a regular
basis, a vehicle such as the 110 Pick Up, where the load can be stowed as far
forward as possible would be appropriate. For less heavy loads, the 110 DCPU will
give additional personnel carrying capabilities.
ToWing
Trailer loading
In order to obtain the best performance from your Land Rover vehicle, trailers
should be loaded level (or slightly nose down) and to the correct nose weight of
150kg. Note the trailer nose weight must be taken into account when loading the
vehicle as it will add to the vehicle’s rear axle weight and will have a disproportionate
effect due to the position of the tow bar behind the rear axle (see table opposite).
choosing the correct equipment
Land Rover offers a range of towing equipment to suit different applications,
both as optional original equipment and accessories.
Multi-height tow bars enable the tow ball to be fitted in three different positions
to suit different trailer towing requirements.
Adjustable tow bars enable the tow ball to be readily adjusted to different heights
using a quick release pin and are suitable for users who are likely to tow a variety
of different trailers, or where the rear height of the vehicle may vary significantly
with different payloads.
Either a 50mm tow ball or jaw unit can be specified. A more versatile
Combination Tow Ball/Jaw Unit is available as an accessory. The tow ball is
suitable for most towing purposes, the jaw unit gives greater versatility.
RooF RacKS
Any load on the roof of the vehicle will affect vehicle handling and significant or tall
loads should be avoided. Land Rover recommends a maximum of 150kg including
the roof rack.
Land Rover Accessories and Land Rover Professional Vehicles offer a range of
roof rack systems to ensure roof loads are carried as safely as possible. Sports
bars are suitable for long loads that can be secured at two points such as ladders,
canoes, windsurfers etc and, being the lightest racks, have the greatest weight
carrying capability within the 150kg recommendation. They can also be fitted with
a variety of specific attachments for items such as skis and luggage boxes etc.
Expedition racks are available in different lengths applicable to different body
styles and wheelbases. These are suitable for stowing a quantity of different items
of equipment and enable loads to be distributed across a wider area to keep the
load height to a minimum.

loAD cApAbiliTiES
MAxiMUM AxlE kg
90 110 130
Standard Heavy Duty Standard Heavy Duty Standard
Front axle 1,250 1,250 1,250 1,580 1,580
Rear axle 1,500 1,500 1,980 2,200 2,200
Gross vehicle weight 2,505 2,550 3,050 3,500 3,500
Heavy Duty Suspension is only available on 90 Station Wagon and 90 Pick Up. 110 Station Wagon not available with Heavy
Duty suspension
SUSpEnSion
90 110 110 HEAVY DUTY & 130
Front
Live beam axle, linear rate coil springs, coaxial telescopic
Nitrogen-charged hydraulic dampers. Panhard rod and Radius
arms. Anti-roll bar if alloy wheels fitted.
Live beam axle, dual rate coil springs, coaxial telescopic
Nitrogen-charged hydraulic dampers. Panhard rod and Radius
arms. Anti-roll bar.
Live beam axle, linear rate coil springs, coaxial telescopic
Nitrogen-charged hydraulic dampers. Panhard rod and
Radius arms. Anti-roll bar.
Rear
Live beam axle, dual rate coil springs, telescopic
Nitrogen-charged hydraulic dampers. ‘A’ frame and Trailing Links.
Anti-roll bar if alloy wheels fitted.
Live beam axle, triple rate coil springs, telescopic
Nitrogen-charged hydraulic dampers. ‘A’ frame and Trailing Links.
Live beam axle, triple rate coil springs, coaxial linear rate helper
springs, telescopic Nitrogen-charged hydraulic dampers.
‘A’ frame and Trailing Links. Anti-roll bar.
ToWinG kg
90 110 130
RooF loAD SYSTEM kg
90/110/130
Braked trailer 3,500 3,500 3,500
Unbraked trailer 750 750 750
Recommended max. trailer nose weight 150 150 150
Effect on rear axle weight 201 204 (HCPU 220) 211
Roof rack 150
Ladder rack 150
Approved Land Rover Genuine Parts roof rack.
Weight includes roof rack.
33

PROFESSIONAL VEHICLES
Defender’s design architecture lends itself perfectly to versatility and
one-off, tailor-made solutions. It is already available in nine core body
styles including Station Wagon, Hard Top, Pick Up and Double Cab Pick Up.
Chassis Cabs are available for the 110 and 130 wheelbases and can offer even greater degrees of adaptability and
specialisation through Land Rover Professional Vehicles. There are almost a limitless number of bespoke variations available.
90 HARD TOP 90 PICK UP 90 STATION WAGON 110 CHASSIS CAB
110 DOUBLE CAB PICK UP
110 HARD TOP 110 HIGH CAPACITY PICK UP
110 PICK UP 110 STATION WAGON 110 UTILITY STATION WAGON 130 CHASSIS CAB
130 DOUBLE CAB CHASSIS 130 DOUBLE CAB
130 ARMOURED CASH IN TRANSIT
HIGH CAPACITY PICK UP

110 B6 ARmOUReD*
110 FielD AmBUlAnce 130 FielD AmBUlAnce
110 mine site vehicle
130 mine site vehicle
For commercial or market legislative reasons not all Defender Professional
Vehicles are available in all markets. For further information, please contact
your local Land Rover Dealer or visit www.landrover.com/professional
*110 Armoured Defender: EN1522 & EN1063 ‘B6’ Certified Discrete Ballistic Protection
35

ACCESSORIES
Many practical features are standard on Defender.
However, a range of specialised accessories adds
even more capability, individuality and style. It’s a real
opportunity to give your Defender its own identity.
Among the numerous items available are several carrying and towing options, exterior
styling and protection additions and interior enhancements. They’re all available individually
and can be fitted at any time - not just when the vehicle is new. And remember, Land Rover
Approved Accessories are designed and manufactured to the same exacting standards
as the original equipment fitted to your vehicle.
Visit www.landrover.com for more information
Vehicle shown right is accessorised with Expedition Roof Rack System, Two Part Rear Access Ladder, Raised Air Intake,
Wing Top Protectors, Front Lamp Guards, A-Frame Protection Bar, Ribbed Aluminium Undershield, Front Mudflaps,
16 inch 5-Spoke Alloy Wheels - Dual Finish and Folding Side Step.

Vinyl Wheel Cover
Protect your spare wheel from mud and dirt with this premium
quality padded wheel cover.
Distinctive Land Rover logo
Vinyl Wheel Cover - 205 and 600 R16 tyres (not shown) STC8485AA
Vinyl Wheel Cover - 265 R16 tyres (not shown) STC8487AA
Vinyl Wheel Cover - 7.5 R16 tyres (not shown) STC8488AA
Moulded Wheel Cover
STC7889
Styled spare wheel cover fits most wheel sizes.
Front Mudflaps
RTC9479
Heavy duty moulded Mudflaps reduce spray and help protect vehicle
paintwork. Mudflaps, front pair for 90 and 110 models only.
16 inch 5-Spoke Alloy Wheel – Dual Finish
VPLDW0001YCM Ð Rim only
Features distinctive embossed Defender branding. Recommended tyre:
Continental Conticross Contact AT 235/85R16. Defender 90 and 110 only
with standard suspension. Compatible with 2009 Model Year vehicles onwards.
The Boost and Gloss Black Saw Tooth Alloy wheels shown on page 29 may also
be available as accessory fitments. Please see your Land Rover Dealer for
further details.
Centre Cap
Bright Polished Finish - LR023301
Locking Wheel Nut Kit
Wheel nut kits are required for all upgrades from steel to alloy wheels and
include a full kit of locking and plain wheel nuts which provide added security
at low cost for your valuable wheels and tyres.
Snow Chains
Snow Chains give improved steering and braking control on snow and ice,
when fitted to front wheels (can also be fitted to rear wheels when necessary).
Easy-fit design, manufactured from high quality hardened galvanised steel, the
chains are supplied in a tough vinyl carry bag for storage when not in use.
Snow Chains - 235/65 and 265/75 R16 tyres STC8518
Snow Chains - 235/85 R16 and 7.5 R16 tyres (not shown) STC7664
Locking Wheel Nut Kit for steel wheels (not shown) RTC9535
Locking Wheel Nut Kit for alloy wheels - 265 R16 tyres (not shown) STC7623
Locking Wheel Nut Kit for alloy wheels - 205 R16 and 235 R16 tyres (not shown) STC8843AA
Locking Wheel Nut Kit for alloy wheels - stainless steel finish (not shown) RRD500560
Tyre Valve Caps (set of 4)
Land Rover Branded - LR027560
Full Coloured Union Jack - LR027664
Black Union Jack - LR027666
Raised Air Intake
LR008383
Ideal for dusty conditions, this raised
air intake secures to the vehicleÕs
ÔAÕ post and also utilises the existing
air intake vent fixings. Suitable for
Td5, 2.4 and current 2.2 Diesel engines.
Please Note: Not compatible with
SVX Soft Top model.
PLEASE NOTE: When choosing vehicles fitted with specific wheel and tyre combinations or optional wheels and tyres, your intended use of the vehicle should be considered.
Alloy wheels may be more vulnerable to damage in some off-road conditions. Please discuss your requirements with your Land Rover Dealer when selecting your vehicle and specification.

Front Lighting Pack
Includes headlamp, main beam and indicator lamp. Requires Moulding Kit LR008361.
RHD - with headlamp levelling - VPLDV0001
LHD - with headlamp levelling - VPLDV0003
RHD - without headlamp levelling - VPLDV0002
LHD - without headlamp levelling - VPLDV0004
Moulding Kit - Bright Silver Finish
LR008361
Includes four bar grille and headlamp moulding surrounds.
Please Note: Not recommended for use with 9.5ti Electric Winch (VUB500820).
PIAA Driving Lamp Kit
LR006815
High Performance Bumper Mounted Driving Lamps, with covers, suitable
for all vehicles but not compatible with hinged lamp guards, front bumper
step plates and Front Lighting Pack and Moulding Kit.
Hinged Lamp Guards – front pair
STC53161
Hinged Lamp Guards – rear pair
STC53157
Rear LED Lamps
Clear lens design. Three lamps per
side required. Not compatible
with rear Hinged Lamp Guards.
Please see your Land Rover Dealer
for further details.
Upgraded Performance
Headlamp Bulbs – pair
VPLDV0061
Enhanced light output.
2007 Model Year vehicles onwards.
Worklight
RTC8921AA
Enables your Defender to provide floodlight style illumination when
working in reduced lighting conditions. Fits both 90 and 110 models.
Switches, cables and brackets are supplied in the kit.
Hinged Lamp Guards
These hinged lamp guards will help protect front and rear lenses from flying stones and low-speed impact, with an opening feature to enable easy lamp cleaning.
Constructed from durable, black nylon-coated steel with plastic ÔPÕ clips to help prevent corrosion.
Hinged Lamp Guards - front pair - STC53161* Not compatible with Front Lighting Pack and Moulding Kit.
Hinged Lamp Guards - rear pair - STC53157** For door mounted spare wheel. Not compatible with 235/265 tyres and Moulded Wheel Cover.
Hinged Lamp Guards - rear pair - (not shown) - STC53158** Without door mounted spare wheel.
Hinged Lamp Guard - single - (not shown) - STC50448** For door mounted spare wheel where Rear Access Ladder with lamp guard is fitted.
Fixed Lamp Guards
These sturdy mesh style lamp guards offer cost effective protection for front
and rear lenses.
Single Front Lamp Guard fits 90 and 110 (not shown) 345985*
Rear Lamp Guards, pair. Two sets required for each vehicle.
Fits 90 and 110, except HCPU (not shown) VUB504110**
*Not compatible with Moulding Kit (LR008361).
**Not compatible with Rear LED Lamps.
39

A-Frame Protection Bar – non winch version - VPLPP0060*
A-Frame Protection Bar – winch version (not shown) - VPLPP0061*
Manufactured from durable polymer, suitable for models with
or without air conditioning.
*Compliant to EEC Directive 2005/66.
Chequer Plate Protection Kit
Features sill edge and rear corner protectors and two front bumper step
plates. Defender 90SW, silver STC50245. Defender 110SW - except HCPU -
silver (not shown) - STC50381. Defender 110SW - except HCPU - black
(not shown) EBN500051. Defender 90SW - black (not shown) - EBN500050
Please Note: Front bumper step plates are not compatible with PIAA Driving
Lamp Kit (LR006815).
Wing Top Protectors
Manufactured in an aluminium chequer plate design, these enable
access to roof racks and a potential viewing height advantage.
Wing Top Protectors - silver LR005230 (2007 Model Year vehicles onwards)
Wing Top Protectors - black (not shown) - LR005242 (2007 Model Year
vehicles onwards).
Ribbed Aluminium Undershield
LR008247 Provides under-engine
protection when driving off-road.
Undershield - Old Style
(not shown) - STC50437
Aluminium blade with steel
sub-structure.
Ribbed Aluminium Cover
(not shown) - VPLDP0003
Ribbed aluminium cover to update
the old style Undershield (STC50437)
to the new style (LR008247) using the
existing brackets and fixings.
Side Protection Runners
Black Finish - Defender 90 - LR008379
Black Finish - Defender 110 (not shown) - LR008375
The sturdy steel design enhances the appearance of your Defender as well as
easing entry and exit. The moulded rubber footgrips ensure non-slip stability.
Side Protection Runners – Twin Tube
Stainless Steel - Defender 90 - VPLDP0006
Black Finish - Defender 110SW and Double Cab (not shown) - VPLDP0067
Black Finish - Defender 90SW (not shown) - VPLDP0068
Folding Rear Step
STC7632
Original equipment pattern spring-loaded folding step for all Defender models.
Folding Side Step
VPLDP0106
Spring-loaded folding step makes access to the interior of your Defender
easier. Supplied with fitting kit. For all Defender models.
Rear Step Bumper
Makes access to the loadspace easy as well as offering added protection
from minor knocks, and also incorporates a dual height tow bracket.
Defender 90 - VPLDP0095 Defender 110 (not shown) - VPLDP0096

Sports Bar System*
STC7582
A high leg design which extends the carrying potential for a variety of equipment.
The sports bars can accommodate a range of attachments, including roof
boxes and special carriers for various sports equipment. Vehicle height when
fitted 2,088mm (90SW) and 2,141mm (110SW). Load capacity 75kg.
Luggage Box*†
VPLVR0062
Opens from both sides. Lockable for security. External dimensions: 1,750mm long,
820mm wide, 450mm high. Volume 440 litres. Load capacity 75kg.
Sports Box*†
VPLVR0061
Can be mounted either side for kerbside opening in any country.
Internal retention system for skis or other long loads. Lockable for security.
External dimensions: 2,060mm long, 840mm wide, 340mm high. Volume 420 litres.
Load capacity 75kg.
Aqua Sports Carrier*†
LR006846
Carries one surfboard or sailboard and mast, or one canoe or kayak.
Load capacity 45kg.
Ski and Snowboard Carrier*†
LR006849
Lockable for security. Carries four pairs of skis or two snowboards.
Incorporates slider rails for easy loading. Load capacity 36kg.
Luggage Carrier*†
LR006848
Load capacity 62.6kg.
Ratchet Strap
(not shown) - CAR500010
Nylon tie strap for securing items to the Sports Bar System, Luggage Carrier
or Expedition Roof Racks. 5 metres long, 20mm wide, supplied individually.
Expedition Roof Rack System†
90 Hard Top/Station Wagon - VPLDR0063 110 Hard Top/Station Wagon
(not shown) - VPLDR0064 110/130 Double Cab (not shown) - VPLDR0065
Heavy duty rack system secured by clamps to the roof gutter.
Two Part Rear Access Ladder
AGP710010
For use with Expedition Roof Racks VPLDR0063 and VPLDR0064.
*Sports Bar System (STC7582) is required for all Land Rover roof-mounted accessories. †Maximum permissible load capacity minus the weight of the roof mounted accessory.
Rear Access Ladder
STC50417
With integrated lamp guard. Not compatible with Rear LED Lamps.
41

Multi-height Tow Bar**
This cost-effective design gives a range of towing heights to suit different trailers
and contains a towing armature, multi-height face plate and 50mm tow ball.
Defender 90 - LR006309
Defender 110 (except HCPU) (not shown) - LR006310
Defender 130 and HCPU - LR006312
Combination Tow Ball/Jaw Unit**
LR008244
50mm tow ball and jaw combination for increased towing versatility
and a 3,500kg capacity.
Tow Jaw*
(not shown) - KNB100640
With a 3,500kg capacity.
Tow Ball**
RTC8891AA
50mm Tow Ball.
Adjustable Tow Bar**
Copes with different trailer coupling heights without the need for any
tools and comprises of a towing armature, sliding plate and security pin.
Defender 90 - LR007221 Defender 110 (not shown) - LR007222
Defender 130 and 110 HCPU (not shown) - LR007223
Locking Security Pin
(not shown) - STC53017 Provides security for adjustable slider plate.
Tow Strap
STC8919AA
Constructed from hard-wearing polyester webbing with a safety hook
at each end, the tow strap will cope with loads of up to 3,000kg (6,600lb).
Reflective stowage bag can double up as a warning flag if placed in the
middle of the strap.
ÔS’ Type Towing Electrics*
(shown left) - LR005921
For use when additional trailer power is required. Capable of supplying interior
lighting and equipment power including fridge feed and battery charging.
Please Note: Not compatible with standard fitted 12N sockets. Must be used
in conjunction with ‘N’ Type Towing Electrics LR005920.
ÔN’ Type Towing Electrics*
(shown right) - LR005920
Provides power for rear trailer lighting including rear lamps, brake lamps,
direction indicators and high intensity fog lamp(s). Can also power
a Lighting Board.
13 Pin Towing Electrics*
LR005919
European style towing electrics, capable of supplying all trailer rear lighting
and interior equipment power, including fridge feed and battery charging.
* These accessories are not suitable for Caravans, Trailers or Lighting Boards fitted with rear mounted LED Lamps.
**For information relating to load capabilities, please refer to page 33.

BaBY-saFe plus infant carrier*
VPLMS0007
For babies 0-13kg (birth to approximately 12-15 months). Includes sun/wind
canopy. Padded machine washable cover. Must be installed with vehicle’s
three-point seat belt.
Duo plus child seat*
LR006637
For children 9-18kg (approximately 9 months – 4 years). One-pull,
height-adjustable headrest and harness. Padded machine washable cover.
Forward facing on rear seat. Includes top tether. Must be installed with
vehicle’s three-point seat belt.
KiD plus child seat*
LR004940
For children 15-36kg (approximately 4 – 12 years). Seat belt guides correctly
position seat belt. Three adjustable width positions. Improved side impact
protection. Padded machine washable cover.
Waterproof seat covers - front pair
(not shown) - VPLDS0038
Provides protection for your Recaro seats.
recaro Front seat Kit
Left-hand seat - VPLDS0036PUY
Right-hand seat (not shown) -
VPLDS0035PUY
Heated seat with cloth seat facings
and leather surround, featuring
Land Rover and Recaro embossed
logos. Installation kit included. Not
compatible with vehicles fitted with
a bulkhead or 90 bulkhead deleted
vehicles with jack stowage brackets
behind the front seats. Applicable
VIN WA138480 110SW, 110 and 130
Double Cab and 9A773310 90 vehicles
with bulkhead deleted. Compatible
with vehicles fitted with heated seat
option. Supplied individually.
audio connectivity system
LR007467
Link lead installation to integrate iPod
nano® Gen 1, 2 and 3, iPod® 30 + 60 + 80Gb,
iPod® classic, iPhone® and iPod touch®
into the vehicle audio speaker system.
iPod® not included.
radio and single cD
(not shown) XQE500350
radio, single cD and MP3 connectivity
(not shown) XQE500360
Waterproof seat covers**
Protects seats from water, mud, wet and general wear and tear. Easy to fit,
and when not in use, the covers can be stored away in their own carry bag.
Seat covers have been treated to meet automotive flammability standards.
Waterproof Seat Covers - black - 1 st row - VPLDS0011
Waterproof Seat Covers - black - 2nd row 110 (not shown) - VPLDS0012
Waterproof Seat Covers - black - 2nd row 90, 3rd row 110
(not shown) - VPLDS0013
Waterproof Seat Covers - black - 2nd row, 110 Double Cab
and 130 Double Cab (not shown) - VPLDS0148
Touring accessories
Warning Triangle
(not shown) - KCC500021
Vital in emergencies and a legal
requirement in much of mainland
Europe. Supplied in its own
moulded storage box.
First aid Kit
(not shown) - STC7642
Aids in the treatment of cuts
and grazes.
Fire extinguisher
(not shown) - STC8529AA
1kg Powder Extinguisher.
Supplied with mounting bracket.
Fire extinguisher
(not shown) - STC8138AB
2kg Powder Extinguisher.
Supplied with mounting bracket.
Touch-up Paints
(not shown)
A comprehensive range of
touch-up paint sticks and aerosols
to help your Defender look as good
as new despite those minor chips
and scrapes. Please see your
Land Rover Dealer for further details.
iPod, iPod nano, iPod classic, iPod touch and iPhone are trademarks of Apple Inc. registered in the US and other countries.
*Children are safer when correctly restrained in the rear of a vehicle. All seat cover patterns and colours are periodically updated.
**2007 Model Year vehicles onwards, includes Waterproof Head Restraint Covers.
43

Rigid Loadspace Protector*
Manufactured from a tough acrylic material, moulded to fit the contours
of the loadspace area.
Loadspace Protector, for 90SW/HT (shown) and 110SW/HT (not shown)
not compatible with 2nd row 90 and 3rd row 110 seats fitted - LR005081
Cargo Barrier*
Designed to prevent cargo and luggage from entering the passenger
compartment. Manufactured in black nylon coated steel and easy to remove
when not required.
Cargo Barrier - 110SW - LR006447
Cargo Barrier - 90/110HT (not shown) - LR006785
Cargo Barrier - 90SW (not shown) - LR006448
Please Note: ECE R17 compliant
Cubby Box
LR008788
This strong, useful, cubby box is designed to fit between the front seats.
Trimmed in black vinyl. Includes moulded dual drinks holder and fixings.
Rubber Mats
Moulded to fit footwell areas, these mats feature a perimeter wall design that
helps prevent spillage of mud and water from reaching the interior carpet.
Front Footwell Rubber Mats*
LR005039 (2007-2011 Model Year vehicles only).
VPLDS0147 (not shown) (2012 Model Year vehicles onwards).
Rear Footwell Rubber Mats*
Defender 110SW (2nd row) and Double Cab - LR005041
Defender 130 Double Cab/HCPU (2nd row) (not shown) - LR005042
Loadspace Rubber Mat*
Protects the loadspace floor from water, mud and general wear and tear.
Defender 110SW (with 3rd row seats) - LR005040
Defender 110SW (without 3rd row seats) (not shown) - LR005613
Defender 90SW (with 2nd row seats) (not shown) - LR005615
Defender 90HT (not shown) - LR005614
*2007 Model Year vehicles onwards.

9.5ti Electric Winch*
VUB500820
Rated capacity of 9,500lb/4,310kg. 38 metres x 8mm diameter wire rope.
This powerful electric winch is designed to fit easily to the front of your
Defender, even if the air conditioning option is fitted. Offering maximum
reliability for all general winching and self recovery requirements, the winch
is available as a complete vehicle kit, ensuring specification and installation
are straightforward.
Features include:
• Fully reversible power for two-way winching
• Remote control operation, with 3.7 metres/12 feet cable
• Fully automatic load actuated braking system
• Tough replacement bumper/winch mounting designed to cope
with heavy duty usage
• Sealed-for-life, water resistant winch gear housing
• Kit includes winch, mounting brackets, remote control,
electrics safety cut-out switch and fixings.
Winch Accessory Kit
STC53202
Includes strap, snatch block, two shackles, heavy duty gloves and a storage bag.
*Not recommended for use with Moulding Kit (LR008361). 45

landrover.com/
Reducing our dependency
Our plan for a
sustainable future.
We take our responsibility to our
planet very seriously, with an
integrated and innovative approach
for a more sustainable business and
lower carbon world. As a company
we are committed to:
on fossil fuels and the production of man-made CO2 emissions
Using fewer resources
and creating less waste
Enthusing our employees
and stakeholders for sustainable business development
IN SUPPORT OF
46

At Land Rover we
do this by investing
in four key areas:
e_TERRAIN
TECHNOLOGIES. EfficiEnt
powEr systEms, lightwEight
structurEs, rEducEd Emissions
A joint £800m investment into new
technologies designed to reduce
co 2 emissions and improve fuel
consumption. we are targeting a
25 percent reduction in joint fleet
average tailpipe co 2 emissions
by 2015, as part of our carbon
management plan. the all-new
range rover Evoque and freelander 2
vehicles include innovative stop start
technology (on the diesel manual
gearbox) and intelligent power
system management (ipsm)
with regenerative braking, just
two examples of e_tErrAin
tEchnologiEs that reduce our
vehicles carbon footprint. what’s
more, range rover’s Adaptive
dynamics system constantly monitors
vehicle performance, to enhance
driving and emissions efficiencies.
SUSTAINABLE
MANUFACTURING. using
fEwEr rEsourcEs And crEAting
lEss wAstE
world class manufacturing facilities,
certified to iso14001 since 1998.
As a company we are targeting a
25 percent reduction in operating
co 2 emissions by 2012, 25 percent
in waste to landfill and 10 percent
in water consumption, based on
2007 levels. our activities include
factory energy efficiencies, cutting
transport miles and the carbon
offset of all co 2 emissions from
manufacturing assembly. But it
doesn’t stop there. Every new
vehicle is designed to be 85 percent
recyclable and reusable, in addition
95 percent recoverable and reusable,
with 10 percent specifically for
energy recovery.
CO 2 OFFSETTING.
invEsting in rEnEwABlE EnErgy,
tEchnology chAngE And EnErgy
EfficiEncy projEcts
for every tonne of co 2 emitted
during the manufacturing assembly
of all our vehicles, land rover invests
in carbon reduction projects that
reduce an equivalent tonne of co 2
elsewhere. in addition, we enable
our customers to offset their first
45,000 miles/72,000 km of driving in
their new vehicles. we do this in the
uK as well as countries in Europe, the
middle East and Asia. independently
administered by climatecare
and forum for the future, co 2
offsetting allows us to take action
now, to reduce our impact on
the environment, as part of our
integrated carbon management plan.
CONSERVATION
AND HUMANITARIAN
PARTNERSHIPS. worKing
pArtnErships for consErvAtion
And sociEty’s gAin
our vehicles are designed for
purpose, so are used by conservation
and humanitarian organisations
worldwide. working with our five
global conservation partners and
the international federation of
red cross and red crescent
societies (ifrc), land rover is proud
to support the important work of
the royal geographical society
(with iBg), the Born free foundation,
Earthwatch institute, Biosphere
Expeditions and the china Exploration
and research society.
FACT
We will use life cycle assessment
to understand the environmental
impact of our vehicles, including the
use of e_TERRAIN TECHNOLOGIES,
beginning with Range Rover Evoque.
FACT
Turning waste food into energy in a
trial at our headquarters in Gaydon,
has diverted 43 tonnes of waste
from landfill and saved 3.7 tonnes
of CO 2 emissions.
FACT
We plan to offset approximately
3,000,000 tonnes of CO 2 emissions
by 2012.
FACT
In 2010 Land Rover launched a new
three-year global initiative with the
IFRC entitled ‘Reaching Vulnerable
People Around the World’.
Land Rover has supported the
IFRC’s life saving work since 2007
and to date has given over £4m
in vital funding and vehicle support
to help vulnerable people around
the world.

www.landrover.com
Land Rover is the Official Vehicle of
Rugby World Cup 2011 in New Zealand
and Rugby World Cup 2015 in England.
Land Rover will supply vehicles to support
the organisers, teams and officials.
TM © Rugby World Cup Limited 2008.
ImpORtANt NOtIcE: This publication is intended for international usage and whilst Land Rover take the utmost care in ensuring that all details in the publication are correct at the time of going to press, we are constantly striving for improvement
and therefore reserve the right to alter specifications and equipment without notice. Details of specifications and equipment are also subject to change to suit local market conditions and requirements, and not all products are available in every
market. Some vehicles are shown with accessories or optional equipment fitted.
All Land Rover Approved Accessories fitted by a Land Rover Dealer within one month or 1,600 kilometres/1,000 miles (which ever occurs first) of the handover of a new registered vehicle will benefit from the same warranty terms and period
of cover as the vehicle warranty. Accessories purchased outside of these parameters will be subject to 12 month unlimited mileage warranty. All Land Rover Approved Accessories are rigorously tested to the same exacting standards as those
applied to our vehicles. Performance in extreme hot and cold temperatures, corrosion resistance, impact and airbag deployment highlight some of the exhaustive product testing carried out to ensure accessories are both durable and importantly,
continue to comply with current legislation. All our accessories are designed to be an integral part of Land Rover vehicles. While many items such as roof carriers are simple to fit, some products require specialist tools and diagnostic equipment
to ensure correct integration with the vehicle structure and electrical systems. These products vary from market to market, please consult your Land Rover Dealer who will be pleased to advise you on current specifications and any query you may
have. Distributors and Dealers are not agents of Land Rover and have absolutely no authority to bind Land Rover to any express or implied undertaking or representation.
The colours reproduced here are subject to the limitations of the printing process and may therefore vary slightly from the actual vehicle. The company reserves the right to alter or withdraw any colour finish without notice. Some of these colours
may not be obtainable in your country. Please check availability of colours and current specifications with your Land Rover Dealer.
LAND ROVER Registered Office:
Banbury Road, Gaydon, Warwick CV35 0RR, United Kingdom.
Registered in England and Wales: Number 4019301
www.landrover.com
Please recycle this brochure after use
© Land Rover 2011. Publication Number: LRML 3499/11

Vehicle shown above is accessorised with Expedition Roof Rack System, Two Part Rear Access Ladder,
Raised Air Intake, Front Lamp Guards, 16 inch 5-Spoke Alloy Wheels - Dual Finish, Front Mudflaps,
Multi-height Tow Bar, Combination Tow Ball/Jaw Unit and Folding Side Step.