OMNIA-User manual OMNIA6-SERIES

More documents

Recommendations

Info

Remote Interface: Configuration: Eight (8) inputs, RS-232 level-compatible. Software sensing of both 'go-high' and 'go-low' transitions. Inputs are protected to +/- 15 VDC. Connector: EMI suppressed DE-9 male. Control: <strong>User</strong>-programmable using built-in Trigger Script feature in Omnia 6 Remote Control software. Virtually any parameter of the Omnia 6 may be programmed to change through this interface feature. Power Requirements: Voltage: 100-250 VAC, 50/60/440 Hz., < 75VA Connector: EMI suppressed IEC male. Detachable 3-wire power cords supplied for US and European use. Internal Power Supply: Overvoltage and short circuit protected. Meets EN55022, EN55011 Level B Conducted Emissions. EN61000-4-2, -3, -4, -5, -6 level 3 immunity compliant. Full international safety approval. CE marked. Environmental: Operating Temperature: 32 to 122 degrees F / 0 degrees to 50 degrees C for all operating voltage ranges. Humidity: 0-95% RH, non-condensing. Dimensions: 19” wide x 5.25” high x 16” deep (48.26cm wide x 13.335 cm high x 40.64 cm deep) including connectors. Unit requires three EIA rack spaces for proper mounting. Shipping Weight: 35 lbs. / 15.876 kg Telos/Omnia Research and Development is constantly working to improve the quality of our products. Actual specifications are subject to change or improvement without notice. Omnia-6ex Use and Operation Manual – V: 1.20 10
Warranty This Warranty covers “the Products,” which are defined as the various audio equipment, parts, software and accessories manufactured, sold and/or distributed by TLS Corp., d/b/a Omnia (hereinafter “Omnia”). With the exception of software-only items, the Products are warranted to be free from defects in material and workmanship for a period of two years from the date of receipt by the end-user. Software-only items are warranted to be free from defects in material and workmanship for a period of 90 days from the date of receipt by the end-user. This warranty is void if the Products are subject to Acts of God, including (without limitation) lightning; improper installation or misuse, including (without limitation) the failure to use telephone and power line surge protection devices; accident; neglect or damage. EXCEPT FOR THE ABOVE-STATED WARRANTY, <strong>OMNIA</strong> MAKES NO WARRANTIES, EXPRESS OR IMPLIED (INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE). In no event will Omnia, its employees, agents or authorized dealers be liable for incidental or consequential damages, or for loss, damage, or expense directly or indirectly arising from the use of any of the Products or the inability to use any of the Products either separately or in combination with other equipment or materials, or from any other cause. In order to invoke this Warranty, notice of a warranty claim must be received by Omnia within the above-stated warranty period and warranty coverage must be authorized by Omnia. If Omnia authorizes the performance of warranty service, the defective Product must be delivered, shipping prepaid, to: Omnia, 2101 Superior Avenue, Cleveland, Ohio 44114. Omnia, at its option will either repair or replace the Products and such action shall be the full extent of Omnia’s obligation under this Warranty. After the Products are repaired or replaced Omnia will return them to the party that sent the Products, and Omnia will pay for the cost of shipping. Omnia’s authorized dealers are not authorized to assume for Omnia any additional obligations or liabilities in connection with the dealers’ sale of the Products. Omnia products are to be used with registered protective interface devices which satisfy regulatory requirements in their country of use. Omnia-6ex Use and Operation Manual – V: 1.20 11
Page 1 and 2: Omnia-6EX / EXi HD + FM Broadcast A
Page 3 and 4: S A F E T Y I N S T R U C T I O N S
Page 5 and 6: CE CONFORMANCE - This device compli
Page 7 and 8: Omnia 6 Performance Specifications
Page 9: Digital Audio Input: Configuration:
Page 13 and 14: Menu Selections, continued System 4
Page 15 and 16: Omnia-6EX Quick-Start Setup Guide W
Page 17 and 18: The Omnia-6EX also contains a third
Page 19 and 20: memory card. During system power-up
Page 21 and 22: Interface Connection (DB-9M) This c
Page 23 and 24: Chapter-2: The Omnia 6 User Interfa
Page 25 and 26: Level Meters & Processing Bargraphs
Page 27 and 28: In all menus with adjustable parame
Page 29 and 30: User Interface Tutorial - Input Sou
Page 31 and 32: Menu Overview This section presents
Page 33 and 34: Schedule System Schedule Menu Syste
Page 35 and 36: Note: The following Factory Presets
Page 37 and 38: Process Input Process Menu Input Me
Page 39 and 40: 2. For both the Digital and Analog
Page 41 and 42: SRC (Sample Rate Converter) board (
Page 43 and 44: Encode (FM Mode Only) Omnia-6ex Use
Page 45 and 46: Save to Card Stores the Schedule an
Page 47 and 48: Lock Unit Highlight and click to im
Page 49 and 50: Network Opens up a window to set th
Page 51 and 52: Wideband AGC: A very flexible wideb
Page 53 and 54: Look Ahead Limiter (HD/DAB): The in
Page 55 and 56: to either AC coupling in the STL sy
Page 57 and 58: Omnia-6EX Connections FM Mode (Conv
Page 59 and 60: HD Mode (Digital Channel) Output Co
Page 61 and 62:
Chapter-5: Fine Tuning Your Sound M
Page 63 and 64:
The Meter Display AGC Metering Limi
Page 65 and 66:
The intent of the Limiter sections
Page 67 and 68:
Parameter Editing The Omnia-6 syste
Page 69 and 70:
level is reached, is set by the rem
Page 71 and 72:
Use the RTP Speed to set the amount
Page 73 and 74:
Space EFX: The Omnia-6EX contains a
Page 75 and 76:
Final Mixer (Mix) This is the final
Page 77 and 78:
steps until the loudness just drops
Page 79 and 80:
Saving, Renaming, Deleting and Prot
Page 81 and 82:
Passcode In order to gain access to
Page 83 and 84:
The following sections are provided
Page 85 and 86:
Thunder Bass Omnia-6EX has the powe
Page 87 and 88:
Setting Up and Configuring Omnia Re
Page 89 and 90:
3. If you wish to connect over a ne
Page 91 and 92:
Using a Custom Modem Initialization
Page 93 and 94:
Using an Ethernet Network Based Con
Page 95 and 96:
NOTE: Even if the optional HD mode
Page 97 and 98:
Some Common Usage of Trigger Script
Page 99 and 100:
ename Renames the preset by its in
Page 101 and 102:
Creating a Trigger Script Now that
Page 103 and 104:
Initiating Trigger Scripts via the
Page 105 and 106:
Chapter-7: Troubleshooting your Omn
Page 107 and 108:
Audio Failure Alarm If no audio is
Page 109 and 110:
Failed to initialize RTC Descriptio
Page 111 and 112:
Note: The composite outputs and the
Page 113 and 114:
Omnia-6 Omnia-6ex Use and Operation
Page 115 and 116:
Appendix B Audio Processing FAQ…
Page 117 and 118:
located at the transmitter site, an
Page 119 and 120:
Classical3: This uses a bit more pr
Page 121 and 122:
Omnia-6EX Parameter Worksheet Prese
Page 123 and 124:
Portions of the embedded software a
Page 125:
Each version is given a distinguish
show all

OMNIA-User manual OMNIA6-SERIES

Create successful ePaper yourself

Delete template?

Save as template?